Abstract:This study presented a meso-model for the fracture analysis of the reinforced concrete (RC) structure. A modeling method of RC meso-structure was proposed, and the rebars were allowed to separate from the concrete. The model was built using the cohesive zone model (CZM). The zero-thickness cohesive elements were adopted to characterize the mechanical behavior of potential fracture surfaces and rebar–concrete interfaces. The constitutive model for concrete was developed by considering the damage relation and friction effect, and the corresponding constitutive for the rebar–concrete interface (especially ribbed rebar) was developed by considering the influence of normal separation on the tangential bond–slip relation. To validate the proposed meso-model, a series of ribbed RC beams with an initial notch was designed and tested by four-point bending loading to obtain different fracture patterns. Through comparison, the developed RC meso-model was validated to simulate the RC structure's fracture behavior appropriately. The influence of the rebar–concrete interface constitutive model on the simulation results was investigated. The investigation results indicate that neglecting normal separation would result in an overestimation of the structure's stiffness and bearing capacity (the peak load was overestimated by more than 10%). Finally, an analysis was conducted on the energy consumption during the failure process of the RC beams. It was found that the proportion of energy consumption during tensile failure of the beam decreased from approximately 86% to 89% in the early stage to approximately 43% to 52% in the later stage, indicating a transition in the beam's failure mode from tensile failure to shear failure.

Mesoscale simulation on f racture process of wedge splitting and three-point bending of concrete

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Cohesive Cracking Simulation of Concrete Using Effective Modulus

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Numerical Experiment on Size Effect for Sfrc Splitting Fracture

Mesoscale Computational Simulation of the Mechanical Response of Reinforced Concrete Members

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Numerical simulation of cracking of early-age concrete three-point beams

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

Mesoscale fracture analysis of three-point bending concrete beams based on cohesive zone model

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Application of Mesoscopic Rigid-body-spring Method of Concrete in Splitting Test

Simulation of Meso-Fracture for Concrete Based on the Developed Random Aggregate Model

Simulation of Multiscale Time and Space in Fracture Process of Three-Point-Bending Concrete Beam with Offset Notch

MESOSCALE MODELING ON SIZE EFFECT OF SPLITTING TENSILE STRENGTH AND FLEXURAL COMPRESSIVE STRENGTH OF CONCRETE

3D Mesoscale Fracture Analysis of Concrete under Complex Loading

Computer simulation on the three-point bending test of concrete specimen

Experimental and Numerical Analysis of the Ribbed Reinforced Concrete Fracture Behavior Based on the Mesoscale FE Model