Abstract:The applicability of mesoscopic models plays an important role in studying the mesoscopic mechanical properties of concrete. In this study, the computerized tomography (CT) test of concrete under uniaxial compression conditions is conducted using a portable dynamic loading equipment developed by Xi’an University of Technology and a medical Marconi M8000 spiral CT scanner. On the basis of damage partition theory, a probabilistic statistical method for determining threshold values is proposed, and a CT test images is obtained and divided into aggregate, hardened cement and hole-crack areas. A ‘structural random numerical concrete model’ is also established on the basis of the coordinates of each pixel unit in CT images. Uniaxial static compression and tensile numerical simulation tests are conducted. Results show that the structural random numerical concrete model can not only reflect the microscopic composition of concrete but also the interfacial transition zone (ITZ) between aggregate and mortar. The ITZ thickness is approximately 0.04 mm, which is close to the real concrete sample ITZ thickness (approximately 10–50 μm). In the two tests, the specimen damage starts from the initial defects, and the damage crack expands through the weaker ITZ around the aggregate. No matter under the action of static tension or compression load, the damage cracks of the sample almost never pass through the aggregate. Most of the many cracks in uniaxial compression are shear cracks. However, many cracks form at the beginning of uniaxial tension, and only one main crack, which is roughly perpendicular to the loading direction, exists in the end.

Microscopic Numerical Simulation of Reinforced Concrete Damage Evolution under Uniaxial Tension and Compression

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Mesoscopic Numerical Evolution Analysis of Concrete Damage under Uniaxial Tension and Compression

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Numerical Simulation of Concrete Dynamic Compressive Strength under Impact Loading Based on Mesomechanics

Numerical Simulation of Mesoscopic Tensile Fracture Process of Concrete Using the Cohesive Elements

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Study on Micromechanical Elastic-Plastic-brittle Damage Model of Concrete

Mesoscale Computational Simulation of the Mechanical Response of Reinforced Concrete Members

A meso-scale analysis method for the simulation of nonlinear damage and failure behavior of reinforced concrete members

Mesoscopic Numerical Influence Analysis of Random Mechanical Parameter of Concrete Damage Evolution

3D meso‐scale numerical model and dynamic mechanical behavior of reinforced concrete

Meso Numerical Simulation of Reinforced Concrete Members

NUMERICAL SIMULATION OF THREE-DIMENSIONAL MESO-MECHANICAL MODEL FOR DAMAGE PROCESS OF HETEROGENEOUS CONCRETE

Numerical simulation of high-strength concrete under uniaxial/triaxial compression based on meso-scale model

Numerical Simulation of Crack Development in Reinforced Concrete Structures Subjecting Eccentric Loading

Numerical Simulation on Shear Fracture Process of Concrete Using Mesoscopic Mechanical Model

Numerical Simulation of Strength Envelope and Fracture Patterns of Concrete under Biaxial Loading

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

Numerical Reconstruction Model and Simulation Study of Concrete Based on Damaged Partition Theory and CT Number