Effect of Multi-component Alloy Interlayer on Interfacial Microstructure and Shear Strength of Titanium/Bronze Bimetal
Lixing Sun,Rongyan Zhang,Shuhua Liang,Lei Ni,Qi Jiang,Jiabao Chen,Yihao Zhang,Juntao Zou
DOI: https://doi.org/10.1007/s11837-024-06670-8
2024-06-12
JOM
Abstract:Titanium/bronze bimetal finds broad prospective application in piston pumps in the aerospace field, while joining of titanium alloy to bronze is quite challenging because of the significant difference in the thermophysical properties between these two materials. The present work aimed to fabricate TC6/CuSn10Pb1 bimetal via using hot press diffusion bonding and a CuAgZnCd multi-component alloy as the intermediate layer. The results showed that cracks occurred in TC6/ZCuSn10Pb1 interface without using an interlayer, resulting in low shear strength. A crack-free bonding interface between TC6 and ZCuSn10Pb1 was obtained by using t.e AgCuZnCd as interlayer. During joining of TC6 and ZCuSn10Pb1 with the addition of the CuAgZnCd interlayer, the layered CuSn 3 Ti 5 intermetallic compound was formed near the ZCuSn10Pb1 side of bonding interface at the bonding temperature ranges of 775–825°C, Following bonding at 850°C, a TC6/AgCuZnCd/ZCuSn10Pb1 bimetal without layered intermetallic compounds was obtained, and the intermetallic compounds and solid solution phase in the bonding interface showed fine grain size, resulting in improved strength-ductility synergy of bimetal. Besides, as the bonding temperature increased to 875°C, an obvious layered CuTi 4 and Cu 2 Ti intermetallic compounds formed in the bonding interface, and interface shear strength decreased rapidly.
materials science, multidisciplinary,metallurgy & metallurgical engineering,mineralogy,mining & mineral processing