Abstract:The mechanical properties of the aluminum matrix composite directly affect its application in aerospace, transportation, and other industries. In this study, the effect of TiB 2 particles on the comprehensive properties which includes microstructure, thermal deformation behavior, tensile properties, fracture morphology and hardness of Al-Zn-Mg-Cu alloy was analyzed. Furthermore, the microstructures of these alloys were analyzed using energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and a metallography microscope. The stress–strain curves and dynamic softening of the two alloys were studied using the thermal compression test. Furthermore, a thermal processing diagram was constructed for comparing the safety and instability processing zones of the alloys. The Vickers hardness test and the tensile test were performed to compare their hardness, tensile properties, and fracture morphologies. The results demonstrated that TiB 2 was contributing to the refinement of the grain size. When the deformation temperature and the stress–strain rate were 300–450 °C and 0.01–10 s −1 , the alloy exhibited the same stress-strain variation trend during the thermal compression process before and after adding TiB 2 particles. But the deformation resistance of the alloy was improved and processing instability zones were reduced from 300–320 °C/2.5–10 s −1 and 430–450 °C/0.2–0.5 s −1 to 420–450 °C/0.2–1 s −1 because of the addition of TiB 2 particles. TiB 2 particles could also increase the hardness of the alloy by 71.96% and improve the plastic properties and the fracture stress compared with before adding.

Effect of TiB2 on Tribological Properties of TiAl Self-lubricating Composites Containing Ag at Elevated Temperature

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

PREPARATION AND PROPERTIES OF TiB2/TiAl COMPOSITE SHEETS WITH LAYERED STRUCTURE

Effect of Temperature on Tribological Properties of Tial Based Self-Lubricating Composites

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

Tribological behavior of in-situ nanosized TiB2 particles reinforced AZ91 matrix composite

Influence of Ti3AlC2 content and load on the tribological behaviors of Ti3AlC2p/Al composites

Effect of Cu and Zn elements on morphology of ceramic particles and interfacial bonding in TiB2/Al composites

Tribo-Mechanical Properties of HVOF Deposited Fe₃Al Coatings Reinforced with TiB₂ Particles for Wear-Resistant Applications

Effect of In-Situ TiB2 Particles on the Creep Properties of 3 Wt.% TiB2/Al-Cu-Mg-Ag Composite

Wear Behavior of Ti6Al4V Based Hybrid Composites Reinforced with TiB2(7.5%) + TiC (7.5%)

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Effects of alloy elements (Mg, Zn) on the microstructure and mechanical properties of (TiC+TiB2)/Al composites

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Microstructure, mechanical properties and tribological behaviors of TiAlN-Ag composite coatings by pulsed magnetron sputtering method

Effects of Ti3SiC2 on microstructure and properties of TiC0.4 enhanced TiAl matrix composites

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Influence of Mo doping on the tribological behavior of Ti3AlC2 ceramic at different temperatures

Microstructure and tribological behavior of Al-TiC composite strips fabricated by a multi-step densification method

Tribological properties and microstructures of Al2O3-TiC-TiB2 reinforced composites