Abstract:In practical engineering, a driving stress often exists and acts on the soil elements, and this stress may have a significant effect on the deformational characteristics and liquefaction resistance of sand when the sand is subjected to seismic loadings. This paper presents a systematic experimental investigation into the undrained cyclic behavior of saturated loose sand with the static shear under both triaxial compression and extension conditions. Various combinations of the magnitude of static stresses and cyclic stresses were considered in the triaxial tests. The results indicate that different static shear stress conditions lead to two distinct failure modes, namely, flow liquefaction and residual deformation failure. The required number of loading cycles for the onset of flow deformation and failure are both related to two stress parameters, i.e., cyclic stress ratio (CSR) and static stress ratio (SSR). In viewing the failure envelope established against the two stress variables CSR and SSR, a critical SSR that identifies the role of the presence of initial static shear stress is obtained: when SSR is less than that critical value, the resistance may increase, whereas the resistance may decrease as SSR becomes larger. In addition, the triggering conditions of flow deformation under cyclic loading can be interpreted with the instability response of sand under monotonic loading. Combined with the observation on the cyclic deviatoric strains developed during and after the flow deformation, a unified interpretation is made to quantify the effects of both the SSR and CSR on the cyclic resistance of loose sand.

Preliminary Study on Flow Constitutive Model of Post Liquefied Sand in Zero Effective Stress State

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Constitutive Model And Its Application Of Flow Deformation Induced By Liquefied Sand

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Cyclic Flow Behavior of Anisotropically Consolidated Sand with a Small Amount of Fines

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Flow Liquefaction Potential of Loose Sand: Stress Path Envelope and Energy-Based Evaluation

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

A Constitutive Model for Evaluating Small to Large Cyclic Strains of Saturated S and During Liquefaction Process

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Experimental Study on Strength and Deformation Characteristics of Saturated Sand after Liquefaction

A Cyclic Elasto-Plastic Constitutive Model for Evaluating Large Liquefaction-Induced Deformation of Sand

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Soil Dynamic Constitutive Considering Post-Liquefaction Deformation and Reversible Pore-Water Pressure

Hypoplastic model with fabric change effect and semifluidized state for post‐liquefaction cyclic behavior of sand

Post-liquefaction Flow Failure of Saturated Dilative Sands and Its Mechanism