Abstract:A microfluidic device with a sandwich structure is proposed to achieve label-free and size-selective separation of tumor cells from pleural effusion. The sandwich structure is a co-flow system incorporating an initial sample layer, an isolation layer and the target sample layer. The isolation layer is used to provide a size-selective interface between the initial sample layer and the isolation layer. The relative magnitude of the inertial lift force and the interfacial lift force at the interface only allows exfoliated tumor cells to migrate out of the sample layer. The high interfacial elastic lift force of the isolation layer also enables the device to be used for pleural effusion samples, whose properties usually vary across a wide range. The target sample layer is used for large migration distances of exfoliated tumor cells in the contraction−expansion array (CEA) channel and high separation efficiency. Cell washing is also achieved with the target sample layer, demonstrating the integration of our device. Experimentally, an optimal flow rate ratio of 1:1:6 was obtained to ensure the stability of the sandwich structure, and the collected fluid was all from the target sample layer. A critical polyethylene oxide (PEO) concentration of the isolation layer (500 ppm, <i>η</i><sub>0</sub> = 1.37 mPa·s) was then obtained by particle tests. Twenty-micrometer particles were efficiently separated from different viscoelastic samples (PEO concentration changes from 0 to 400 ppm) at this concentration. For the cell test, exfoliated tumor cells from different pleural effusion samples were successfully separated and washed. The separation efficiency of exfoliated tumor cells and blood cells was about 100% and over 90%, respectively. Compared with a conventional co-flow system of two fluids, this device has great advantages in 1) wide applicability for pleural effusion samples of various viscoelasticity and 2) focusing performance. It shows potential for use in medical research and clinical diagnosis of cancer.

Filtration Membrane with Ultra-High Porosity and Pore Size Controllability Fabricated by Parylene C Molding Technique for Targeted Cell Separation from Bronchoalveolar Lavage Fluid (BALF)

2.5-Dimensional Parylene C Micropore Array with a Large Area and a High Porosity for High-Throughput Particle and Cell Separation

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Microfabrication of Micropore Array for Cell Separation and Cell Assay.

Fabrication of Perforated Isoporous Membranes Via a Transfer-Free Strategy: Enabling High-Resolution Separation of Cells

Fabrication of Nanoporous Alumina Ultrafiltration Membrane with Tunable Pore Size Using Block Copolymer Templates

On reactive Ion Etching of Parylene-C with Simple Photoresist Mask for Fabrication of High Porosity Membranes to Capture Circulating and Exfoliated Tumor Cells

Fabrication of perforated polyethylene microfiltration membranes for circulating tumor cells separation by thermal nanoimprint method

High-porosity thin membrane for high-efficiency capture of rare cells

Particle Sorting Using a Porous Membrane in a Microfluidic Device

High-quality Microhole Arrays by Water-Assisted Femtosecond Laser Perforating for Improved Particle Sorting

Separation of exfoliated tumor cells from viscoelastic pleural effusion using a microfluidic sandwich structure

Poly(lactic-co-glycolic acid)/Polycaprolactone Nanofibrous Membranes for High-Efficient Capture of Nano- and Microsized Particulate Matter.

Preparation of pocket shaped microfiltration membranes with binary porous structures

PDMS-based artificial lung membranes with enhanced permeation to overcome the bottleneck in CO 2 /O 2 selectivity

Engineering self-assembled 2D nano-network membranes through hierarchical phase separation for efficient air filtration

Designable Regulation of Cell Filtration Through a Micropore-Arrayed Filter

Efficient and reusable polyamide-56 nanofiber/nets membrane with bimodal structures for air filtration

FABRICATION OF MASSIVELY-PARALLEL REGULAR NANOFILTERS FOR HIGH- THROUGHPUT BIOMOLECULE SEPARATION

Precise Pore Size Tuning and Surface Modifications of Polymeric Membranes Using the Atomic Layer Deposition Technique

Concentration Match Based Modulation for Clogging-Free Filtration Through Micropore Arrays