Abstract:Droplet sorting and enrichment, as a prominent field within microfluidic technology, represent a pivotal stage in the manipulation of droplets and particles. In recent times, droplet sorting methods based on lab-on-disk (LOD) have garnered significant interest among researchers for their inherent merits, including high throughput, ease of operation, seamless device integration, and independence from supplementary driving forces. This study introduces a centrifugal force-driven microfluidic chip comprising spiral microchannels. The chip incorporates microhole arrays along the sidewall of the spiral channels, enabling size-based sorting and enrichment of microdroplets under the influence of multiple forces. Firstly, a comparative analysis was performed to assess the influence of the separation port structure and rotational speed on efficiency, and a mechanical modeling approach was employed to conduct kinetic analyses of droplet behavior during instantaneous separation. Those findings demonstrated a good agreement with the experimental results at ω <100 rpm. Subsequently, sorting experiments on homogeneous droplets indicated that repetitive sorting could increase the recovery ratios, RT(α), of high-concentration droplets (20.7%) from 35.3% to over 80%. We also conducted a sorting experiment on three-component homogeneous-phase emulsions using a serially connected chip array, and the sorting throughput was 0.58 mL/min. As a result, the RT(α) for 60 and 160 μm droplets were 99.4% and 88.9%, respectively. Lastly, we conducted elution experiments and dualsample sorting on a single chip, and the fluorescence results demonstrated that this study provided an efficient and non-cross-contaminating sorting method for non-homogenous phase multi-sample microreactor units.

Particle Sorting Using a Porous Membrane in a Microfluidic Device

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

A Facile Strategy to Integrate Robust Porous Aluminum Foil into Microfluidic Chip for Sorting Particles

Microfluidic Co-Flow of Newtonian and Viscoelastic Fluids for High-Resolution Separation of Microparticles.

A centrifugal-driven spiral microchannel microfiltration chip for emulsion and deformable particle sorting.

2.5-Dimensional Parylene C Micropore Array with a Large Area and a High Porosity for High-Throughput Particle and Cell Separation

A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

Three-dimensional Microporous Hollow Fiber Membrane Microfluidic Device Integrated with Selective Separation and Capillary Self-Driven for Point-of-care Testing.

High-speed discrimination and sorting of sub-micron particles using a microfluidic device

Understanding microbeads stacking in deformable Nano-Sieve for Efficient plasma separation and blood cell retrieval

A Self-Cleaning Micro-Fluidic Chip Biospired by the Filtering System of Manta Rays

Arch-like Microsorters with Multi-Modal and Clogging-Improved Filtering Functions by Using Femtosecond Laser Multifocal Parallel Microfabrication.

Efficient Microfluidic Particle Separation Using Inertial Pre-Focusing and Pre-Separation Structures Without Sheath Flow

Design of a high-throughput integrated microfluidic chip combining micromixing and particle sorting functions

Observation Interface of PDMS Membrane in a Microfluidic Chip Based on One-Step Molding

Sheathless inertial focusing chip combining a spiral channel with periodic expansion structures for efficient and stable particle sorting.

High-quality Microhole Arrays by Water-Assisted Femtosecond Laser Perforating for Improved Particle Sorting

Combination of an Optically Induced Dielectrophoresis (ODEP) Mechanism and a Laminar Flow Pattern in a Microfluidic System for the Continuous Size-Based Sorting and Separation of Microparticles

Filtration Membrane with Ultra-High Porosity and Pore Size Controllability Fabricated by Parylene C Molding Technique for Targeted Cell Separation from Bronchoalveolar Lavage Fluid (BALF)

Sorting and separation of microparticles by surface properties using liquid crystal-enabled electro-osmosis

Creating Sub-50 Nm Nanofluidic Junctions in PDMS Microfluidic Chip Via Self-Assembly Process of Colloidal Particles.