Abstract:0.1 TW pulsed power generator (PPG-I) constructed for the research on X-pinch and Z-pinch was tested. The generator is composed of a 1.2 MV Marx generator with sixteen 0.65-μF capacitors charged to 75 kV in parallel and then erected in series, a 1.25 Ω pulse forming line (PFL) using distilled water as insulation, a V/N spark switch filled with pressurized SF6 gas, a 1.25 Ω pulse transmission line (PTL) using also distilled water as insulation and a 1.25-Ohm pseudo-load made of CuSO4 solution. It is found that the output voltage of PPG-I is influenced by the pressure of SF6 filled in the auxiliary gap of the V/N switch when the SF6 pressure of main gap keeps at 4.6 atm. If SF6 pressure in the auxiliary gap is 2.7 atm, the auxiliary gap will first self-break down at the time when the PFL is charged to a voltage of 1.1 MV, near its maximum charging voltage, causing multi-channel discharge in the main gap. In this case, the output voltage with a 1.25 ohm matching load is a square-wave with 470 kV in amplitude, 30 ns in risetime and 110 ns in FWHM. If SF6 pressure in the auxiliary gap rises to 3.4 atm, the auxiliary gap will not break down and the main gap breaks down with only one discharge channel when the PFL is charged to 1.1 MV. In this case, the output voltage of 440 kV in amplitude rises much more slowly with a risetime of 70 ns and without a flat top. It is concluded that the output voltage pulse from PPG-1 is suitable for driving X-pinch and Z-pinch load when the V/N switch works in multi-channel discharge mode.

Analysis of Prepulse in a 500kV/400kA/lOOns Z-Pinch Device

A preliminary experiment on x-pinch

X-Ray Backlighting of Developments of $X$ -Pinches and Wire-Array $Z$ -Pinches Using an $X$ -Pinch

Diagnostics for a Small Gas-Puff Z-pinch Plasma Device

Preliminary Experiments on 0.1 TW Pulsed Power Generator

Load Section Design of a Pulsed Power Generator for X-pinch

X-ray Backlighting of Wire Expansion and Plasma Merging of Z-Pinch Load with 10-40Ka/wire

Experiment with a small gas-puff z-pinch plasma device

X-ray Backlighting of the Initial Stage of Single-Wire and Multi-Wire Z-pinch

A Supersonic Nozzle for Gas-Puff Z-pinch

X-ray emission from an X-pinch

Preconditioned wire array Z-pinches driven by a double pulse current generator

$X$ -Pinch Experiments on 1-MA “Qiangguang-1” Facility

Measurement and Analysis on Soft X-ray Spectrum Produced by Z-pinch Plasma

X-ray Emission from a Table-Top X-pinch Device

Analyzing the Energy Spectra of Ion Beams Emitted from X-Pinch Plasma

Axial Backlighting of Two-Wire Z-pinch Using an X-pinch As an X-ray Source

A pulsed power generator for x-pinch experiments

Conversion of electromagnetic energy in Z-pinch process of single planar wire arrays at 1.5 MA

X-pinch applications in X-ray radiography and design of compact table-top X-pinch device