Abstract:Low intrinsic thermal conductivity coefficients (λ) of polyimide (PI) films limit their application in heat-prone flexible electronics. By optimizing the liquid crystal range to fit the curing temperature, novel kinds of intrinsically highly thermally conductive liquid crystalline PI (LC-PI) films are fabricated. When the molar ratio of 4,4′-diaminodiphenyl ether (ODA) to 1, 4-bis(4-aminophenoxy)benzene (TPE-Q) is 1:3 (sample no. IV), liquid crystal range of preLC-PIIV films is 272∼388 °C, including curing temperature of 350 °C. The LC-PIIV films cured in liquid crystal range retain liquid crystal texture to room temperature, and the in-plane λ (λ∥) and through-plane λ (λ⊥) at room temperature reach 2.11 W/(m·K) and 0.32 W/(m·K), respectively, significantly higher than λ∥ (0.77 W/(m·K)) and λ⊥ (0.15 W/(m·K)) of LC-PII films which are cured out of the liquid crystal range. Meanwhile, LC-PIIV films possess excellent mechanical and thermal properties, showing application prospects in high-heating flexible electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.1c00686?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.1c00686</a>.S1, experimental section; S1.1, main materials; S1.2, characterizations; S2, supporting results; Figure S1, molecular weight distribution curves of 5 kinds of PAA; Table S1, comparison of characterized number-averaged molecular weight with theoretical values of 5 kinds of PAA; Figure S2, FTIR spectra of 5 kinds of PAA (a), preLC-PI films before curing (b), and preLC-PIIV films after thermal treatment of 250 °C/5 h, 275 °C/5 h, 300 °C/5 h, 325 °C/5 h, and 350 °C/5 h (c); Figure S3, POM images of LC-PII (a), LC-PIII (b), LC-PIIII (c), and LC-PIV (d) films at room temperature; Figure S4, tensile stress–strain curves of LC-PI films; Figure S5, tensile stress–strain curve of N–PI films; and Table S2, thermal characteristic data of LC-PI films (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.1c00686/suppl_file/ma1c00686_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Porphyrinated Polyimide Honeycomb Films with High Thermal Stability for Hcl Gas Sensing

Colorimetric and Fluorescent Sensor Constructing from the Nanofibrous Membrane of Porphyrinated Polyimide for the Detection of Hydrogen Chloride Gas

A composite of quaternized and crosslinked poly(4-vinylpyridine) with processable polypyrrole for the construction of humidity sensors with improved sensing properties

High heat-resistant polyimide films containing quinoxaline moiety for flexible substrate applications

Synthesis, characterization and optical gas-sensing application of block copolymer templated mesostructured peroxopolytungstic acid films

Gas transport performance of highly heat-resistant and organo-soluble fluorinated polyimides with bulky pendant group

Sensitive and fast optical HCl gas sensor using a nanoporous fiber membrane consisting of poly(lactic acid) doped with tetraphenylporphyrin

Molecular imprinting of hemispherical pore-structured thin films via colloidal lithography for gaseous formaldehyde Gravimetric sensing

LONG-PERIOD FIBER GRATING COATED WITH PNIPAM FOR THERMAL SENSING APPLICATIONS

Liquid Crystalline Polyimide Films with High Intrinsic Thermal Conductivities and Robust Toughness

From a hyperbranched polyimide to a microporous network polyimide via reaction temperature change and its application in gas separation membranes

Synthesis and properties of modified thermoplastic polyimide films with good dielectric properties at high frequency and enhanced thermal stability via incorporation of rigid ester and biphenyl structural units

Heat‐resistant and transparent polyimides derived from alicyclic dianhydrides and phthalazinone‐based diamine

Fabrication, Facilitating Gas Permeability, and Molecular Simulations of Porous Hypercrosslinked Polymers Embedding 6FDA-Based Polyimide Mixed-Matrix Membranes

Solution-Processed Chloroaluminum Phthalocyanine (ClAlPc) Ammonia Gas Sensor with Vertical Organic Porous Diodes

Colorless transparent and thermally stable terphenyl polyimides with various small side groups for substrate application

Transparent semi-aliphatic polyimide films with excellent thermal stabilities for applications in the display technology

Gas permeability of fluorinated hyperbranched polyimide

Composite nanofibers of conducting polymers and hydrophobic insulating polymers: Preparation and sensing applications

Synthesis and properties of novel colorless and thermostable polyimides containing cross‐linkable bulky tetrafluorostyrol pendant group and organosoluble triphenylmethane backbone structure

Design, Synthesis and Properties of Semi-Alicyclic Colorless and Transparent Polyimide Films with High Glass Transition Temperatures and Low Retardation for Potential Applications in Flexible Electronics