Abstract:In the last few years the concept of an active space telescope has been greatly developed, to meet demanding requirements with a substantial reduction of tolerances, risks and costs. This is the frame of the LATT project (an ESA TRP) and its follow-up SPLATT (an INAF funded R&D project). Within the SPLATT activities, we outline a novel approach and investigate, both via simulations and in the optical laboratory, two main elements: an active segmented primary with contactless actuators and a pyramid wavefront sensor (PWFS) to drive the correction chain. The key point is the synergy between them: the sensitivity of the PWFS and the intrinsic stability of a contactless-actuated mirror segment. Voice-coil, contactless actuators are in facts a natural decoupling layer between the payload and the optical surface and can suppress the high frequency vibration as we verified in the lab. We subjected a 40 cm diameter prototype with 19 actuators to an externally injected vibration spectrum; we then measured optically the reduction of vibrations when the optical surface is floating controlled by the actuators, thus validating the concept at the first stage of the design. The PWFS, which is largely adopted on ground-based telescope, is a pupil-conjugated sensor and offers a user-selectable sampling and capture range, in order to match different use cases; it is also more sensitive than Shack-Hartmann sensor especially at the low-mid spatial scales. We run a set of numerical simulations with the PWFS measuring the misalignment and phase steps of a JWST-like primary mirrors: we investigated the PWFS sensitivity in the sub-nanometer regime in presence of photon and detector noise, and with guide star magnitudes in the range 8 to 14. In the paper we discuss the outcomes of the project and present a possible roadmap for further developments.

Recent Progress with the KWISP Force Sensor

KWISP: an Ultra-Sensitive Force Sensor for the Dark Energy Sector

Zeptonewton force sensing with squeezed quadratic optomechanics

First Results On The Search For Chameleons With The Kwisp Detector At Cast

Akwisp: Investigating Short-Distance Interactions at Sub-Micron Scales

Design, fabrication, and characterization of kinetic-inductive force sensors for scanning probe applications

Detecting Solar Chameleons Through Radiation Pressure

Design, fabrication and characterization of kinetic-inductive force sensors for scanning probe applications

A hybrid on-chip optomechanical transducer for ultrasensitive force measurements

Quectonewton local force sensor

Kinetic Inductive Electromechanical Transduction for Nanoscale Force Sensing

A self-calibrating optomechanical force sensor with femtonewton resolution

A single-atom level mechano-optical transducer for ultrasensitive force sensing

Nano-Newton electrostatic force actuators for femto-Newton-sensitive measurements: System performance test in the LISA Pathfinder mission

NanoNewton electrostatic force actuators for femtoNewton-sensitive measurements: system performance test in the LISA Pathfinder mission

Contactless actuators and pyramid wavefront sensor, the SPLATT concept for space active optics: an overview of the project and the last laboratory results

A BTO/PVDF/PDMS Piezoelectric Tangential and Normal Force Sensor Inspired by a Wind Chime

A material change for ultra-high precision force sensing

A single-atom 3D sub-attonewton force sensor

Spatial mapping of photovoltage and light-induced displacement of on-chip coupled piezo/photodiodes by Kelvin probe force microscopy under modulated illumination