Abstract:TiB2 particulate reinforced aluminum matrix composites (TiB2/Al-MMCs) have received extensive attention due to a great potential in a wide variety of applications. Nano-TiB2/Al-MMCs have also received attention from scholars with the development of nanotechnology in recent years. However, obstacles like agglomeration of nanoparticles in the matrix, and the difficulty of preparation of nanoparticulate reinforced metal matrix composites (PRMMNCs) still need to be resolved. This study summarizes the research progress of Al-matrix composites (Al-MMCs) in recent years and exemplifies the common preparation methods. Experiments were designed to study the common problems in the preparation of composite materials. Two experiments were designed and completed in this study. First, TiB2/Al-4.5Cu composites were synthesized through a mixed salt reaction method. The distribution of reinforcing particle in the aluminum matrix was observed. The predictive model of particle behavior in Al-4.5wt. %Cu matrix based on thermodynamic laws was re-examined. The experiment results are inconsistent with the prediction from a classic prediction model. Regardless of the rate of solidification and critical velocity (VC), the most of the particles are rejected by advancing solid-liquid interface. Through review of classic particle pushing theory, this study attempts to derive a new boundary condition used to predict the behavior of reinforcing particles in a metal matrix during solidification based on the diffusion convection equations. Second, nano-TiB2/Al composites with a variety of volume fractions were synthesized by ultrasound assistance in a stirring method. The research has focused on optimization and improvement of preparation methods. High-energy ball milling (HEBM) and high-intensity ultrasound (HIU) were introduced into the fabrication process. Furthermore, a forging post-treatment process is used to process as-cast samples prepared by the experiment, so that the reinforcing particles in the composite material can be redistributed. The experiment results show that HEBM facilitates the mixing of nano-TiB2 particles with salts. HIU helps distribute particles evenly throughout the matrix. The Vickers hardness and tensile strength of the composites were tested. The results indicated that the forging treatment has great influence on the mechanical properties of composite materials.

Stability of Nanoparticle Dispersion and Property Enhancement in Aluminum Matrix Nanocomposites During Repeated Casting Cycles

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

An Investigation of Nanoparticle Wetting, Grain Refinement and Mechanical Property Enhancement in Aluminum Matrix Nanocomposites

Using Diluted Master Nanocomposites to Achieve Grain Refinement and Mechanical Property Enhancement in As-Cast Al–9Mg

Enhancing Dispersion of TiB2 Nanoparticles in Al Composites Via Ultrasonic-Assisted Fast Cooling Schemes

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

High Thermal Stability and Mechanical Properties of Nanosized-Fe-reinforced Aluminum Matrix Composites Via Deformation-Driven Metallurgy

Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion

Nucleation Catalysis in Aluminum Alloy A356 Using Nanoscale Inoculants

Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

Effects of TiC0.5N0.5 Nanoparticles on the Microstructure, Mechanical and Thermal Properties of TiC0.5N0.5/Al-Cu Nanocomposites

Microstructure and Mechanical Properties of In-Situ Nano Γ-Al2o3p/a356 Aluminum Matrix Composite

Copper Matrix Composites Reinforced with Nanometer Alumina Particle

Simultaneously Increasing Strength and Ductility of Nanoparticles Reinforced Al Composites Via Accumulative Orthogonal Extrusion Process

Simultaneous Improvement of the Electric Conductive and Mechanical Properties of Nanostructured Aluminum Alloy

Deformation-driven Metallurgy of SiC Nanoparticle Reinforced Aluminum Matrix Nanocomposites

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES

Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles

Development of Al-TiCN Nanocomposites Via Ultrasonic Assisted Casting Route

Synthesis of TiAl/Nb Composites with Concurrently Enhanced Strength and Plasticity by Powder Metallurgy