Abstract:Metal additive manufacturing (AM) techniques, such as selective laser melting (SLM), enable the fabrication of advanced aluminum matrix composites (AMCs) with distinct microstructure and enhanced mechanical properties. In this study, an ultrasonic vibration technique together with SLM is employed to fabricate TiN/AlSi10Mg nanocomposites with alternative TiN nanoparticle contents (0, 2, 4, and 6 wt.%). The effects of TiN nanoparticles on the SLM processability, microstructure, texture evolution, recrystallization, and mechanical properties of TiN/AlSi10Mg are investigated. Results show that nearly fully-dense composite parts can be manufactured by enhancing the SLM processability. Increasing the TiN addition can gradually transform the crystallographic orientation from a strong (001) direction to a relatively random distribution that vanishes the preferred (001) texture. The continuous heterogeneous nucleation, recrystallization of α-Al grains, and Zener pinning along the grain boundaries occur during the SLM process due to the presence of the TiN nanoparticles, resulting in a significantly refined microstructure. The TiN nanoparticles are dominantly distributed along the Al grain boundaries, while rod-like nano-Si precipitates are well-dispersed inside the grains. Both TiN and nano-sized Si have well-bonded interfaces with the Al matrix. The optimal TiN content is found to be 4 wt.%, at which the additively manufactured specimens exhibit high tensile strength (492 ± 5.5 MPa), high ductility (7.5 % ± 0.29), and microhardness (157 ± 4.9 HV) simultaneously. The underlying mechanisms of strength and ductility improvement are also elucidated. This study sheds light on the additive manufacturing of aluminum nanocomposites out of nanoparticles modified composite powder for the production of advanced materials with free-form microarchitectures.

Simultaneously Increasing Strength and Ductility of Nanoparticles Reinforced Al Composites Via Accumulative Orthogonal Extrusion Process

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Improved Structural Homogeneity and Mechanical Properties of Nanoparticles Reinforced Al Composites after Orthogonal Thermomechanical Processes

Simultaneously Increased Strength and Ductility Via the Hierarchically Heterogeneous Structure of Al-Mg-Si Alloys/nanocomposite

Microstructural Evolution and Mechanical Property of Nanoparticles Reinforced Al Matrix Composites During Accumulative Orthogonal Extrusion Process

Enhanced strength and ductility of TiB2/AA7034 composite by accumulative orthogonal extrusion process

Simultaneously Improved Strength and Ductility in Aluminum Matrix Composite with Heterogeneous Structures under Impact Loadings

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Mechanisms of Simultaneously Improving the Strength and Ductility of an In-Situ Tib &Lt;sub>2</sub>/al-Zn-mg-cu Composite by Elliptical Cross-Section Torsion Extrusion

Overcoming the Strength-Ductility Trade-off of an AZ31 Matrix Composite Reinforced by In-Situ Spherical Al3Fe Nanoparticles

Achieving Simultaneous Enhancement of Strength and Ductility in Al Matrix Composites by Employing the Synergetic Strengthening Effect of Micro- and Nano-Sicps

Simultaneously Increasing the Strength and Ductility of Nano-Sized TiN Particle Reinforced Al–Cu Matrix Composites

Synthesis of TiAl/Nb Composites with Concurrently Enhanced Strength and Plasticity by Powder Metallurgy

Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys

Break through the strength-ductility trade-off dilemma in aluminum matrix composites via precipitation-assisted interface tailoring

Achieving Simultaneously Improved Tensile Strength and Ductility of a Nano-Tib2/alsi10mg Composite Produced by Cold Spray Additive Manufacturing

Effect of micron-Ti particles on microstructure and mechanical properties of Mg–3Al–1Zn based composites

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Simultaneous Enhancement of Strength, Ductility, and Hardness of TiN/AlSi10Mg Nanocomposites Via Selective Laser Melting

Ultrastrong and Ductile Al-Mg Alloy Matrix Composites Via Composition-Modulated Precipitation Induced by Intragranular Ceramic Nanoparticles