Efficiency Exceeding 10% for Inverted Polymer Solar Cells with A Zno/Ionic Liquid Combined Cathode Interfacial Layer

W. Yu,L. Huang,D. Yang,P. Fu,L. Zhou,J. Zhang,C. Li

DOI: https://doi.org/10.1039/c5ta00930h

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:With the ZnO/IL interfacial layer, PTB7-Th : PC71BM i-PSCs can exhibit a champion PCE of 10.15%.

What problem does this paper attempt to address?

Efficient Inverted Polymer Solar Cells Based on Conjugated Polyelectrolyte and Zinc Oxide Modified ITO Electrode

Tao Yuan,Xiaoguang Zhu,Lingyu Zhou,Jian Zhang,Guoli Tu

DOI: https://doi.org/10.1063/1.4913467

IF: 4

2015-01-01

Applied Physics Letters

Abstract:Efficient inverted polymer solar cells (PSCs) were constructed by utilizing a conjugated polyelectrolyte PFEOSO3Na and zinc oxide to modify the indium tin oxide (ITO) electrode. The ITO electrode modified by PFEOSO3Na and zinc oxide possesses high transparency, increased electron mobility, smoothened surface, and lower work function. PTB7:PC71BM inverted PSCs containing the modified ITO electrode achieved a high power conversion efficiency (PCE) of 8.49%, exceeding that of the control device containing a ZnO modified ITO electrode (7.48%). Especially, PCE-10:PC71BM inverted polymer solar cells achieved a high PCE up to 9.4%. These results demonstrate a useful approach to improve the performance of inverted polymer solar cells.
Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film As Cathode Interlayer

Sih-Hao Liao,Hong-Jyun Jhuo,Po-Nan Yeh,Yu-Shan Cheng,Yi-Lun Li,Yu-Hsuan Lee,Sunil Sharma,Show-An Chen

DOI: https://doi.org/10.1038/srep06813

IF: 4.6

2014-01-01

Scientific Reports

Abstract:We present high efficiency and stable inverted PSCs (i-PSC) by employing sol-gel processed simultaneously doped ZnO by Indium and fullerene derivative (BisNPC60-OH) (denoted as InZnO-BisC60) film as cathode interlayer and PTB7-Th:PC71BM as the active layer (where PTB7-Th is a low bandgap polymer we proposed previously). This dual-doped ZnO, InZnO-BisC60, film shows dual and opposite gradient dopant concentration profiles, being rich in fullerene derivative at the cathode surface in contact with active layer and rich in In at the cathode surface in contact with the ITO surface. Such doping in ZnO not only gives improved surface conductivity by a factor of 270 (from 0.015 to 4.06 S cm−1) but also provides enhanced electron mobility by a factor of 132 (from 8.25*10−5 to 1.09*10−2 cm2 V−1 s−1). The resulting i-PSC exhibits the improved PCE 10.31% relative to that with ZnO without doping 8.25%. This PCE 10.31% is the best result among the reported values so far for single junction PSC.
Efficiency Enhancement of Inverted Polymer Solar Cells Using Ionic Liquid-functionalized Carbon Nanoparticles-modified ZnO as Electron Selective Layer

Feng Zhu,Xiaohong Chen,Zhe Lu,Jiaxiang Yang,Sumei Huang,Zhuo Sun

DOI: https://doi.org/10.1007/BF03353765

IF: 26.6

2013-01-01

Nano-Micro Letters

Abstract:ZnO thin film was fabricated on tin-doped indium oxide electrode as an electron selective layer of inverted polymer solar cells using magnetron sputtering deposition. Ionic liquid-functionalized carbon nanoparticles (ILCNs) film was further deposited onto ZnO surfaces by drop-casting ILCNs solution to improve interface properties. The power conversion efficiency (PCE) of inverted polymer solar cells (PSCs) with only ZnO layer was quickly decreased from 2.7% to 2.2% when the thickness of ZnO layer was increased from 15 nm to 60 nm. However, the average PCE of inverted PSCs with ZnO layer modified with ILCNs only decreased from 3.5% to 3.4%, which is comparable to that of traditional PSCs with poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) anode buffer layer. The results suggested that the contact barrier between ZnO layer and poly(3-hexylthiophene) and phenyl-C 61 -butyric acid methylester (P3HT:PCBM) blended film compared to ZnO bulk resistance can more significantly influence the performance of inverted PSCs with sputtered ZnO layer. The vanishment of negative capacitive behavior of inverted PSCs with ILCNs modified ZnO layer indicated ILCNs can greatly decrease the contact barrier of ZnO/P3HT:PCBM interface.
Achieving 10.5% Efficiency for Inverted Polymer Solar Cells by Modifying the Zno Cathode Interlayer with Phenols

Ping Fu,Xin Guo,Bin Zhang,Tao Chen,Wei Qin,Yun Ye,Jianhui Hou,Jian Zhang,Can Li

DOI: https://doi.org/10.1039/c6ta07105h

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:A simple treatment of the ZnO cathode interlayer with phenols (both on the ZnO surface and in blend) for IPSCs.
Enhanced performance of inverted polymer solar cells by combining ZnO nanoparticles and PFN as electron transport layer.

Changfeng Han,Yuanyuan Cheng,Ling Chen,Lei Qian,Ziyan Yang,Wei Xue,Ting Zhang,Yixing Yang,Weiran Cao

DOI: https://doi.org/10.1021/acsami.5b11140

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:A highly efficient inverted polymer solar cell (PSC) has been successfully demonstrated by using ZnO nanoparticle (NP) and PFN bilayer structure as effective electron collecting layer. This ZnO/PFN bilayer structure is designed to combine the advantages of both ZnO and PFN, based on the performance comparison of ZnO-only, PFN-only, and ZnO/PFN bilayer devices in our work. ZnO NPs can serve as efficient electron transport and buffer layer for reduced series resistance, while the PFN interlayer can improve the energy level alignment of devices through the formation of interfacial dipole. With the enhanced electron extraction induced by ZnO/PFN bilayer structure and PTB7:ICBA:PC71BM ternary system, the corresponding inverted PSC device shows remarkably high PCE of 9.3%, which is more than 15% improvement than the ZnO or PFN-only device.
Efficient Inverted Polymer Solar Cells with ITO Cathode Modified by Zinc Oxide and Polyethylene Oxide Bilayers

Youhuan Huang,Ping Cai,Peng Ren,Xiuyun Zhang,Yusong Du,Zhuoliang Zou,Jian Xiong,Xiaogang Xue,Jian Zhang,Junwu Chen

DOI: https://doi.org/10.1002/pssa.201800113

2018-01-01

Abstract:For inverted polymer solar cells (PSCs), zinc oxide (ZnO) with various advantages are typically used as cathode buffer layer, but the existing surface traps/detects of ZnO layer obviously restrict device performance. In this work, the authors introduce polyethylene oxide (PEO) with high molecular weight of 300 thousands to modify the surface of ZnO layer on ITO cathode for inverted PSCs, where PEO possesses the particular advantages of easy accessibility and low cost. Compared with the ITO modified by pure ZnO and PEO layer, the ITO modified by ZnO/PEO bilayers shows the similarly good transparency, the lowest work function, the best surface morphology, and contact property. ZnO/PEO bilayers can provide the optimal energy alignment and interface contact between ITO and active layer, and efficiently eliminate the surface defects of ZnO layer. Therefore, the ITO/ZnO/PEO-based device exhibits the best photovoltaic performance with the PCE of 9.57% compared to the ITO/ZnO-based device (8.42%) and the ITO/PEO-based device (8.16%). The impressive results suggest that ZnO/PEO bilayers should be promising cathode buffer layer for high-performance inverted PSCs.
Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

TingBin Yang,DongHuan Qin,LinFeng Lan,WenBo Huang,Xiong Gong,JunBiao Peng,Yong Cao

DOI: https://doi.org/10.1007/s11426-012-4512-2

2012-01-01

Science China Chemistry

Abstract:A solution-processed zinc oxide (ZnO) thin film as an electron collection layer for polymer solar cells (PSCs) with an inverted device structure was investigated. Power conversion efficiencies (PCEs) of PSCs made with a blend of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM) are 3.50% and 1.21% for PSCs with and without the ZnO thin film, respectively. Light intensity dependence of the photocurrent and the capacitance-voltage measurement demonstrate that the increased PCEs are due to the restriction of the strong bimolecular recombination in the interface when a thin ZnO layer is inserted between the polymer active layer and the ITO electrode. These results demonstrate that the ZnO thin film plays an important role in the performance of PSCs with an inverted device structure.
N-type Small Molecule As an Interfacial Modification Layer for Efficient Inverted Polymer Solar Cells

Pu Fan,Yifan Zheng,Jiasheng Song,Junsheng Yu

DOI: https://doi.org/10.1016/j.solener.2017.09.060

IF: 7.188

2017-01-01

Solar Energy

Abstract:Interfacial modification layer facilitates the preferable contact property between electron transport layer (ETL) and active layer, which is capable of enhancing the performance of inverted polymer solar cells (PSCs). in this study, we use an n -type organic small molecule of N,N-Dioctyl-3,4,9,10-perylenedicarboximide (PTCDI-C8) as the interfacial modification layer on the top of ZnO ETL by thermal evaporation. We demonstrate that the PTCDI-C8 layer can reduce the work function of ZnO, so that the efficiency of electron transfer is improved, and the recombination of charge carrier on the contact interface is suppressed. As a consequence, the power conversion efficiency (PCE) increases from 8.26% to 9.29%, based on the poly[4,8-bis(5-(2-ethylhexypthiophen-2y1)-benzo[1,2-b:4,5-b]clithiophene-co-3-fluorothieno[3,4-b]-thiophene-2-carboxylate] (PTB7-Th): [6,6]-phenylC-71-butyricacid methyl ester (PC71BM) bulk heterojunction (BHJ) active layer. The enhanced device performance is attributed to the improvement of short-circuit current (J(SC)), open -circuit voltage (V-OC) and fill factor (FF). This work provides an effective approach to reach high performance inverted PSCs.
Inverted Polymer Solar Cells with Zn 2 SnO 4 Nanoparticles As the Electron Extraction Layer

Xiao-Juan Huang,Xiang Yao,Wen-Zhan Xu,Kai Wang,Fei Huang,Xiong Gong,Yong Cao

DOI: https://doi.org/10.1016/j.cclet.2017.04.011

IF: 9.1

2017-01-01

Chinese Chemical Letters

Abstract:In this study, we report narrow-size distribution Zn2SnO4 (ZSO) nanoparticles, which are produced by low-temperature solution-processed used as the electron extraction layer (EEL) in the inverted polymer solar cells (i-PSCs). Moreover, poly[(9,9-bis(3'-(N,N-dimethylamino)propy1)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) is used to modify the surface properties of ZSO thin film. By using the ZSO NPs/PFN as the EEL, the i-PSCs fabricated by poly[4,8-bis(2-ethylhexyloxyl)benzo[1,2-b:4,5-b'] dithio-phene2,6-diyl-altethylhexyl-3-fluorothithieno [3,4-b]thiophene-2-carboxylate-4,6-diyl] (PTB7) blended with (6,6)-phenyl-C-71-butyric acid methylester (PC71BM) bulk heterojunction (BHJ) composite, exhibits a power conversion efficiency (PCE) of 8.44%, which is nearly 10% enhancement as compared with that of 7.75% observed from the i-PSCs by PTB7:PC71BM BHJ composite using the ZnO/PFN EEL. The enhanced PCE is originated from improved interfacial contact between the EEL with BHJ active layer and good energy level alignment between BHJ active layer and the EEL. Our results indicate that we provide a simple way to boost efficiency of i-PSCs. (C) 2017 Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences. Published by Elsevier B.V. All rights reserved.
Self‐Assembled Monomolecular Layer Modified ZnO for Efficient Inverted Polymer Solar Cells with 11.53% Efficiency

Guanshui Xie,Zheling Zhang,Junli Li,Yong Hu,Xiaomei Ge,Guoli Tu,Xiaoling Zhang,Xiuyun Zhang,Jian Zhang

DOI: https://doi.org/10.1002/pssr.201900372

2019-01-01

Abstract:Interfacial materials play a vital role in determining the charge carrier collection for the performance of polymer solar cells (PSCs). Herein, a monomolecular (3-aminopropyl) triethoxysilane (APTES) layer is deposited onto ZnO, acting as cathode interfacial layer (CIL) in the inverted PSCs. Inverted PBDB-T:IT-M PSCs with the ZnO-APTES CILs exhibit a power conversion efficiency of 11.53% with a short-circuit current density of 18.37 mA cm(-2), an open-circuit voltage of 0.91 V and fill factor of 68.77%. More than 13% improvement on the power conversion efficiency is achieved by inserting APTES, due to efficient charge collection obtained by a built-in electric field and reduced oxygen defects at the ZnO surface. The results indicate that the ZnO-APTES layer is an efficient CIL for inverted PSCs.
Performance Enhancement in Inverted Polymer Solar Cells Incorporating Ultrathin Au and LiF Modified ZnO Electron Transporting Interlayer

Zhe Lu,Xiaohong Chen,Jianping Zhou,Ziyao Jiang,Sumei Huang,Furong Zhu,Xianqing Piao,Zhuo Sun

DOI: https://doi.org/10.1016/j.orgel.2014.12.032

IF: 3.868

2015-01-01

Organic Electronics

Abstract:The performance enhancement of inverted polymer solar cells (PSCs), based on the blend system of regioregular poly(3-hexylthiophene) and [6,6]-phenyl C61-butyric acid methylester, due to incorporating ultrathin Au and LiF interlayer between the front transparent indium tin oxide and a ZnO electron transporting layer was analyzed. The results reveal that a 40% increase in PCE, e.g., from 2.62% to 3.67%, was observed for PSCs made with an optimal Au/LiF interlayer as compared to the one having a bare ZnO electron transporting layer. The presence of Au/LiF-modified ZnO interlayer between ITO and the organic layer helps to improve the charge collection. The absorption enhancement arising from the plasmon resonance of Au nanostructures also contributed to the improvement in PCE. It is shown that PSCs with LiF incorporated ZnO electron transporting layer allow improving cell lifetime, demonstrating <50% decrease in PCE compared to that of the ones with a bare ZnO interlayer after 240day aging test for cells without encapsulation in air.
Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer.

Jing-De Chen,Yan-Qing Li,Jingshuai Zhu,Qianqian Zhang,Rui-Peng Xu,Chi Li,Yue-Xing Zhang,Jing-Sheng Huang,Xiaowei Zhan,Wei You,Jian-Xin Tang

DOI: https://doi.org/10.1002/adma.201706083

2018-01-01

Abstract:Rapid progress in the power conversion efficiency (PCE) of polymer solar cells (PSEs) is beneficial from the factors that match the irradiated solar spectrum, maximize incident light absorption, and reduce photogenerated charge recombination. To optimize the device efficiency, a nanopatterned ZnO:Al2 O3 composite film is presented as an efficient light- and charge-manipulation layer (LCML). The Al2 O3 shells on the ZnO nanoparticles offer the passivation effect that allows optimal electron collection by suppressing charge-recombination loss. Both the increased refractive index and the patterned deterministic aperiodic nanostructure in the ZnO:Al2 O3 LCML cause broadband light harvesting. Highly efficient single-junction PSCs for different binary blends are obtained with a peak external quantum efficiency of up to 90%, showing certified PCEs of 9.69% and 13.03% for a fullerene blend of PTB7:PC71 BM and a nonfullerene blend, FTAZ:IDIC, respectively. Because of the substantial increase in efficiency, this method unlocks the full potential of the ZnO:Al2 O3 LCML toward future photovoltaic applications.
Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer

Xin-Yan Zhao,Ting Wang,Lu Wang,Xiangyu Zhang,Zui Tao,Bao Xiu Mi,Zhi Qiang Gao

DOI: https://doi.org/10.1016/j.orgel.2017.07.040

IF: 3.868

2017-01-01

Organic Electronics

Abstract:Tetra-nuclear Zinc(II) complex Zn4O(AID)(6) [AID = 7-azaindolate] is a wide band gap luminescent material that exhibits efficient emission matching the absorption spectra of organic donor materials such as polythiophene (P3HT). This work demonstrates polymer solar cells (PSC) based on P3HT: PCBM (phenylC61-butyric acid methyl ester) blend active layer with a Zn4O(AID)(6) cathode interfacial layer achieving a power conversion efficiency (PCE) significantly higher than that of the reference devices. The energy level and impedance spectroscopy analysis show that the Zn4O(AID)(6) cathode interfacial layer acts as an efficient exciton/ hole blocking layer, and reduces charge recombination rate with more efficient electron extraction. The Zn4O(AID)(6) interfacial layer also helps achieve longer lifetime of PSC devices. The improved efficiency and stability combined with low cost and nontoxicity of Zn4O(AID)(6) make it a promising cathode interfacial material for high-performance and stable PSC devices. (C) 2017 Elsevier B. V. All rights reserved.
Inverted Polymer Solar Cells Integrated with A Low-Temperature-Annealed Sol-Gel-Derived Zno Film As an Electron Transport Layer

Yanming Sun,Jung Hwa Seo,Christopher J. Takacs,Jason Seifter,Alan J. Heeger

DOI: https://doi.org/10.1002/adma.201004301

IF: 29.4

2011-01-01

Advanced Materials

Abstract:Highly efficient and air-stable inverted polymer solar cells are fabricated with a poly(2,7-carbazole) derivative (PCDTBT):fullerene derivative (PC(70)BM) active layer. Low-temperature-annealed sol-gel-derived zinc oxide (ZnO) and molybdenum oxide films are selected as the electron and hole transporting layers, respectively. Power conversion efficiency (PCE) of 6.3% is demonstrated, which is the highest reported to date for inverted polymer solar cells.
Efficient Inverted Polymer Solar Cells Through Modified Electron Extraction Layer

Wenzhan Xu,Lili Jiang,Shengjian Liu,Xiaowen Hu,Fei Huang,Xiong Gong,Yong Cao

DOI: https://doi.org/10.1109/jphotov.2015.2414512

2015-01-01

IEEE Journal of Photovoltaics

Abstract:Reengineering the surface of the electron extraction layer (EEL) had been proven to be an effective and simple way to boost the efficiency of polymer solar cells (PSCs) with an inverted device structure. In this study, we report the enhanced efficiency of inverted PSCs by using a conjugated polyelectrolyte to reengineer the surface of sol-gel processed ZnO EEL. It is found that more than 22% enhancement in efficiency is observed from the inverted PSCs with ZnO EEL reengineered by conjugated polyelectrolyte, as compared with the inverted PSCs with ZnO EEL. The enhanced efficiency is originated from decreased series resistance, smooth surface roughness, and decreased work function of ZnO thin layer modified by conjugated polyelectrolyte. Our findings provide a simple approach to boost the efficiency of the inverted PSCs.
Highly efficient inverted polymer solar cells by using solution processed MgO/ZnO composite interfacial layers

Shuai Huang,Bonan Kang,Lian Duan,Dongdong Zhang

DOI: https://doi.org/10.1016/j.jcis.2020.09.047

IF: 9.9

2021-02-01

Journal of Colloid and Interface Science

Abstract:<p>A highly efficient inverted polymer solar cell (PSC) has been successfully demonstrated by utilizing a wide bandgap magnesium oxide (MgO) film and ZnO stacked structure as an effective cathode interfacial layer. The MgO/ZnO bilayer structure is designed to combine the superiorities of both ZnO ETL and MgO film, based on the efficiency comparison of the PSCs without and with MgO interlayer. The ZnO film can serve as an efficient electron transport layer (ETL), while the MgO layer can reduce the surface defects of FTO and block the holes effectively, leading to an elevated electron collection and suppressed carrier recombination at the interface. With the excellent dual functions interface characteristics induced by the MgO/ZnO stacked films, the corresponding inverted PSC device based on the PTB7-Th:PC<sub>71</sub>BM photoactive layer system presents a superior power conversion efficiency (PCE) of 11.02%, which is higher than that of the PSC without MgO (8.79%). We believe that the MgO/ZnO bilayer structure is a superior interfacial contender for the organic photovoltaics and other photoelectric devices requiring cathode interfacial layers.</p>

chemistry, physical
High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO

Yongxiang Zhu,Xiaofeng Xu,Lianjie Zhang,Junwu Chen,Yong Cao

DOI: https://doi.org/10.1016/j.solmat.2011.09.030

IF: 6.9

2012-01-01

Solar Energy Materials and Solar Cells

Abstract:In this work, alcohol-soluble 2,7-carbazole-1,4-phenylene copolymers PCP-NOH and PCP-EP, comprising surfactant-like diethanolamino and phosphonate end groups on the side chains, respectively, were utilized as cathode interlayer on ITO to construct inverted solar cells based on a low band gap poly(2,7-carbazole) (PCDTBT) as the polymer donor and [6,6]-phenyl C71-butyric acid methyl ester (PC71BM) as the acceptor. The work functions of ITO were shifted to −4.2 and −4.3eV by PCP-NOH and PCP-EP, respectively, which can well match the LUMO level of PC71BM for good electron extraction. The power conversion efficiency (PCE) of the inverted solar cells without the cathode interlayer was only 1.63%, because of very low open-circuit voltage (Voc, 0.48V) and fill factor (FF, 36.9%). Using PCP-NOH and PCP-EP as cathode interlayers significantly improved Voc to 0.88V and FF to ∼58%, giving PCEs of 5.39% and 5.48%, respectively. The increasing extents of PCEs by the interlayers are over 230%. The PCEs achieved by PCP-NOH and PCP-EP belong to the top device performances so far reported for the inverted PVCs with an organic cathode interlayer. Our results suggest that hydrophilic conjugated polymers are promising candidates as a cathode interlayer in high efficiency inverted solar cells through the modification of interface contacts.
Towards high efficiency solution processable inverted bulk heterojunction polymer solar cells using modified indium tin oxide cathode

Xiaohong Chen,Jiaxiang Yang,Lim Yi Xuan Candy Haley,Jiong Lu,Furong Zhu,Kian Ping Loh

DOI: https://doi.org/10.1016/j.orgel.2010.09.011

IF: 3.868

2010-01-01

Organic Electronics

Abstract:High efficiency inverted regioregular poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM)-based polymer solar cells (PSCs) using an indium tin oxide (ITO) cathode, modified with a solution-processed ionic liquid-functionalized carbon nanoparticles (ILCNs) layer, was demonstrated. ILCNs-modified ITO cathode has a very good thermal stability and a superior surface electronic property suited for application in polymer solar cells. A power conversion efficiency (PCE) of 3.2% was obtained for inverted PSCs measured under AM1.5G illumination of 100mW/cm2, which is comparable to PCE of a reference P3HT:PCBM-based solar cell having a conventional structure. There was almost no deterioration in the performance of inverted PSCs that were aged over a post-annealing temperature range from 100 to 200°C. The work function of ILCNs-modified ITO cathode annealed at different temperatures was also measured using ultraviolet photoelectron spectroscopy. It was found that the work function of 4.4eV, measured for a bare ITO electrode, decreased to 3.8eV when it was modified with ILCNs, and was not dependent on the post-annealing temperature.
Toward High Performance Inverted Polymer Solar Cells

Fei Huang

DOI: https://doi.org/10.1016/j.polymer.2012.09.023

2013-01-01

Abstract:Bulk heterojunction (BHJ) polymer solar cells (PSCs) that can be fabricated by solution processing techniques are under intense investigation in both academic institutions and industrial companies because of their potential to enable mass production of flexible and cost-effective alternative to silicon-based solar cells. A combination of novel polymer development, nanoscale morphology control and processing optimization has led to over 8% of power conversion efficiencies (PCEs) for BHJ PSCs with a conventional device structure. Attempts to develop PSCs with an inverted device structure as required for achieving high PECs and good stability have, however, met with limited success. Here, we report that (1) solution-processed zinc oxide (ZnO) thin film as an electron extraction layer for inverted polymer solar cells. Operated at room temperature, no obviously degradation was observed from the PSCs with ZnO layer after continuously illuminating the devices for 4 hours. However, a significantly degradation was observed from the PSCs without ZnO buffer layer after illuminating the devices only for 1 hour. Furthermore, PSCs with ZnO buffer layer also show very good shelf stability; only 10 % degradation observed in PCEs after 6 months; (2) a high PCE of 8.4% under AM1.5G irradiation was achieved for BHJ PSCs with an inverted device structure. This high efficiency was obtained through interfacial engineering of solution-processed electron extraction layer, ZnO, leading to facilitate electron transport and suppress bimolecular recombination. All these results provided an important progress for solution-processed PSCs, and demonstrated that PSCs with an inverted device structure are comparable with PSCs with the conventional device structure.
Efficient Organic-Inorganic Hybrid Cathode Interfacial Layer Enabled by Polymeric Dopant and Its Application in Large-Area Polymer Solar Cells

Sheng Dong,Kai Zhang,Xiang Liu,Qingwu Yin,Hin-Lap Yip,Fei Huang,Yong Cao

DOI: https://doi.org/10.1007/s11426-018-9350-4

2018-01-01

Science China Chemistry

Abstract:An organic-inorganic hybrid cathode interfacial layer(CIL) was developed by doping ZnO with the naphthalene-diimide based derivative NDI-PFNBr. It was found the resulting organic-inorganic hybrid CIL showed apparently improved conductivity and could act as an effective cathode interlayer to modify indium tin oxide(ITO) transparent electrodes. As a result, by employing the blend of PTB7-Th:PC71BM as the photoactive layer, the inverted polymer solar cells(PSCs) exhibited a remarkable enhancement of power conversion efficiency(PCE) from 8.52% for the control device to 10.04% for the device fabricated with the hybrid CIL. Moreover, all device parameters were simultaneously improved by using this hybrid CIL. The improved open-circuit voltage(VOC) was attributed to the reduced work function of the ITO cathode, whereas the enhancements in fill factor(FF) and short-circuit current density(JSC) were assigned to the increased conductivity and more effective charge extraction and collection at interface. Encouragingly, when the thickness of the hybrid CIL was increased to 80 nm, the resulting device could still keep a PCE of 8.81%, exhibiting less thickness dependence. Considering these advantages, 16 and 93 cm2large-area PSCs modules were successfully fabricated from the hybrid CIL by using doctor-blade coating techniques and yielded a remarkable PCE of8.05% and 4.49%, respectively. These results indicated that the hybrid CIL could be a promising candidate to serve as the cathode interlayer for high-performance large-area inverted PSCs.

Efficiency Exceeding 10% for Inverted Polymer Solar Cells with A Zno/Ionic Liquid Combined Cathode Interfacial Layer

Efficient Inverted Polymer Solar Cells Based on Conjugated Polyelectrolyte and Zinc Oxide Modified ITO Electrode

Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film As Cathode Interlayer

Efficiency Enhancement of Inverted Polymer Solar Cells Using Ionic Liquid-functionalized Carbon Nanoparticles-modified ZnO as Electron Selective Layer

Achieving 10.5% Efficiency for Inverted Polymer Solar Cells by Modifying the Zno Cathode Interlayer with Phenols

Enhanced performance of inverted polymer solar cells by combining ZnO nanoparticles and PFN as electron transport layer.

Efficient Inverted Polymer Solar Cells with ITO Cathode Modified by Zinc Oxide and Polyethylene Oxide Bilayers

Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

N-type Small Molecule As an Interfacial Modification Layer for Efficient Inverted Polymer Solar Cells

Inverted Polymer Solar Cells with Zn 2 SnO 4 Nanoparticles As the Electron Extraction Layer

Self‐Assembled Monomolecular Layer Modified ZnO for Efficient Inverted Polymer Solar Cells with 11.53% Efficiency

Performance Enhancement in Inverted Polymer Solar Cells Incorporating Ultrathin Au and LiF Modified ZnO Electron Transporting Interlayer

Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer.

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer

Inverted Polymer Solar Cells Integrated with A Low-Temperature-Annealed Sol-Gel-Derived Zno Film As an Electron Transport Layer

Efficient Inverted Polymer Solar Cells Through Modified Electron Extraction Layer

Highly efficient inverted polymer solar cells by using solution processed MgO/ZnO composite interfacial layers

High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO

Towards high efficiency solution processable inverted bulk heterojunction polymer solar cells using modified indium tin oxide cathode

Toward High Performance Inverted Polymer Solar Cells

Efficient Organic-Inorganic Hybrid Cathode Interfacial Layer Enabled by Polymeric Dopant and Its Application in Large-Area Polymer Solar Cells