Abstract:A method to simultaneously measure two-dimensional temperature and emissivity distributions on high-temperature diffuse surfaces is developed using an auxiliary light source. The high-temperature diffuse surface is irradiated from the hemispherical space with the auxiliary light source switched “on” or “off.” Two images of the effective radiation intensity are obtained in quick succession for the two states to determine the temperature and emissivity distributions. The measurement method and uncertainty models show that the effect of the unknown emissivity on the accuracy of the temperature field measurement can be eliminated. The optical pyrometer is a color charge coupled device (CCD) sensor with a quartz lamp array used as the auxiliary light source to illustrate the measurement method. An oxidized W–Ni–Fe alloy sample is heated at high temperatures of 600–1000 °C by a 700 W induction-heating device. The distributions of the effective radiation intensities from the sample surface during the “on” and “off” states of the lamp array are measured in the three color channels (R, G, and B channels) to calculate the temperature and emissivity distributions. The temperature measurement uncertainties are less than 4 °C for a temperature range of 600–900 °C. The temperature measurements are experimentally validated by the thermocouple method only with a small temperature difference. The emissivities calculated from the three color channels are very close with a range of 0.855–0.957. The relative uncertainties in the emissivities for channels R and G are less than 2.0%, while the relative uncertainty for channel B data was higher at 2.8% and 7.5% due to lower measurement signals in channel B. This analysis may provide a useful method for measuring the temperatures of high-temperature diffuse surfaces by successfully compensating for the effects of unknown or changing emissivities.

Notice of Removal Determination of blackbody cavity reflectance at 633nm by integrating sphere reflectometer

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

Spectral emittance measurements of micro/nanostructures in energy conversion: a review

Measurement of Directional Spectral Emissivity at High Temperatures

Measurements of the directional spectral emissivity based on a radiation heating source with alternating spectral distributions

Accurate Determination of the Total Hemispherical Emittance and Solar Absorptance of Opaque Surfaces at Elevated Temperatures

Correction Method for Infrared Spectral Emissivity Measurement System Based on Integrating Sphere Reflectometer

Thermal Emissivity Measurement with Two-temperature Method

Measurement of Bidirectional Reflection Distribution Function on Material Surface

Measurement of Spectral Emissivity of Object Based on Infrared Radiometer

New Design to Measure Absolute Spectral Reflectivity

Integrated Effective Emissivity Computation for Non-Isothermal Non-Axisymmetric Cavities

Numerical Investigation of Measurement Error of the Integrating Sphere Based on the Monte-Carlo Method

Improvements Of Measuring The Hemispherical Emittance Of Selective Coating For All-Glass Evacuated Collector Tubes

Modeling and Analysis of Reflectance Integrating Sphere

Diffuse Reflectance Measurement Using Gas Absorption Spectroscopy

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

COMPARISON OF THE NORMAL THERMAL EMITTANCE MEASUREMENT OF SOLAR SELECTIVE COATING AT THE MIDDLE TEMPERATURES

Diffuse Reflectivity Measurement Using Cubic Cavity.

Measurement of Surface Scattering Characteristics of Black Materials in Thomson Scattering System

Spectral Emissivity and Transmissivity Measurement for Zinc Sulphide Infrared Window Based on Integrating-Sphere Reflectometry