Abstract:Although high-frequency ultrasonic micromachining systems have shown great advantages in microstructure manufacture with high efficiency and accuracy, the potential applications have been limited by the poor performance of insufficient power, transverse vibration interference, and modal dense interference of high-frequency piezoelectric transducers. To address these limitations, an integrated high-frequency piezoelectric transducer (IHPT) was proposed to obtain the pure longitudinal vibration mode by electromechanical equivalent circuit model. Furthermore, finite element method was performed to explore the radial critical dimension effect for the optimal diameter of piezoceramics stack and to suppress transverse vibration interference and modal dense interference by structure optimization of tool rod shape. Finally, prototype tests were conducted to verify the design theory and simulation optimization. The experimental results showed that the designed IHPT has the characteristics of high power, large vibration amplitude, and wide resonance frequency band. Besides, the transverse vibration amplitude is limited to less than 0.1μm and modal dense interference is eliminated within the resonance frequency band of ± 6 kHz. Above results demonstrate that the proposed IHPT within radial critical dimension not only overcomes existing shortcomings of high-frequency piezoelectric transducers, but also provides an integrated design method and simulation reference to improve insufficient power, transverse vibration interference and modal dense interference, which is highly desired in ultra-precision ultrasonic micromachining systems.

The Correction for Using X-Cut Quartz Transducers in Shpb

A New Optical Angle Measurement and Compensation

On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains

BCHT Lead-Free Piezoelectric Ceramics Preparation and Ultrasonic Transducer Fabrication Via Powder Injection Molding Using Simple Binder

A theoretical analysis about the influence of interfacial friction in SHPB tests

Correction To: Static Bending and Vibration Analysis of Piezoelectric Semiconductor Beams Considering Surface Effects

Measurement Accuracy Improvement With Pzt Scanning For Detection Of Dpc In Hi-Bi Fibers

Correlation between the accuracy of a SHPB test and the stress uniformity based on numerical experiments

A modified method for estimating the stress state of granular materials in the passive confined pressure SHPB tests

A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement

Numerical Simulation of Shpb Experiment and Analysis on Stress Wave

Wave dispersion analysis and simulation method for concrete SHPB test in peridynamics

DEFORMATION MEASUREMENT CORRECTION FOR THE THREADED CONNECTION AND TRANSITION PART UTILIZING SHTB

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode

Material behaviour characterisation using SHPB techniques, tests and simulations

A Novel Approach to Correct Diffraction Effect in Measurement of Ultrasonic Velocity and Attenuation at High Frequencies

Strain-rate effect of polymers and correction methodology in a SHPB test

Correction to "Proppant Settlement and Long-Term Conductivity Calculation in Complex Fractures"

Evaluation of Hugoniot parameters for unreacted Al/PTFE reactive materials by modified SHPB test

Integrated high-frequency piezoelectric transducer within radial critical dimension of piezoceramics

Numerical investigation of the dynamic increase factor of ultra-high performance concrete based on SHPB technology