Abstract:Microscale boiling heat transfer experiments were performed using acetone as the working fluid in ten parallel silicon microchannels with hydraulic diameters of 155.4 mum. An infrared radiator image system is used for the chip temperature measurements, while an optical system combining a microscope and a high-speed camera is used for transient flow pattern identification. By covering the present data range it is found that all microchannels repeat the transient flow patterns in a timescale of milliseconds while the fluid pressures/temperatures are stable. A full cycle can be subdivided into three substages: liquid refilling stage, bubble nucleation, growth and coalescence stage, and transient annular flow stage. Correspondingly four flow patterns are identified. Paired or triplet bubbles are observed to be nucleated and grow up simultaneously in, or very close to, the channel corners at the same cross section. The nucleated bubbles experience several milliseconds of growth until coalescence takes place. Then a single liquid plug is separated into two parts, which are pushed out of the flow field view in less than 1 ms. In the transient annular flow stage, the liquid films that are drawn into the comers of the channel become less and less versus time. Once a partially or fully dried-out state is reached, all the microchannels are refilled with fresh liquid and a new cycle begins. The probabilities of each flow pattern occurring and the liquid refilling follow the statistical principle well. The measured chip temperatures are not uniform across the whole heating area, attributed to the uneven liquid refilling probabilities for different channels and the uneven possibilities that are immersed in the liquid for different heating regions. The chip temperatures display spatial variation behavior in the majority of the heating area, due to the liquid and vapor alternatively passing through the microchannels. To the authors' knowledge, some of the above experimental findings have not been previously reported.

Two-Phase Flow Phenomena for Boiling in Two Parallel Microchannels

Two-Phase Flow Instability of Boiling in A Double Microchannel System at High Heating Powers

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Nucleate Boiling Heat Transfer in Silicon-Based Micro-Channels

Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel

Visual Study of Flow Pattern Evolution of Flow Boiling in A Microtube

Flow Boiling in Microchannels Enhanced by Parallel Microgrooves Fabricated on the Bottom Surfaces

Microscale Boiling Heat Transfer in A Micro-Timescale at High Heat Fluxes

Pressure Drop and Flow Boiling Instabilities in Silicon Microchannel Heat Sinks

Forced-Convection and Boiling Characteristics in Microchannels

Two-Phase Flow Patterns In Converging Or Diverging Microchannels With Co2 Bubbles Produced By Chemical Reactions

Visualization of Flow Patterns and Bubble Behavior During Flow Boiling in Open Microchannels

NUCLEATION AND THERMODYNAMIC NONEQUILIBRIUM FOR BOILING IN MICROCHANNELS AND MICROSTRUCTURES

Experimental Study of Flow Boiling Regimes Occurring in a Microfluidic T-Junction

Numerical simulation of boiling behavior in vertical microchannels

Local Heat Transfer of Saturated Flow Boiling in Vertical Narrow Microchannel

Two-phase flow boiling in a microfluidic channel at high mass flux

Effects of Heat Flux, Mass Flux, Inlet Fluid Subcooling, and Channel Orientation on Subcooled Flow Boiling in a High-Aspect-Ratio Rectangular Microchannel