Abstract:Single-phase lead-zirconate-titanate (PZT) perovskite nanofibers, with \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) composition were synthesized using the electrospinning technique. Poly-vinyl-pyrrolidone (PVP) was used as viscosity controller, size and uniformity of the \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers were optimized against different PVP concentrations. The results showed that PVP concentrations play a significant role in the fabrication, homogeneity, uniformity, porosity, and particularly in the diameter of PZT nanofibers. SEM and XRD results revealed the formation of sing-phase \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers at 600 °C with an average diameter of ~ 96 nm. The prepared PZT nanofibers exhibited a significantly wide bandgap (~ 3.5 eV) and a high dielectric-constant (~ 1827). The device of single-phase PZT nanofibers was fabricated on interdigitated electrodes to study the current–voltage, impedance spectroscopy, and dielectric characteristics of the PZT nanofibers. The current–voltage characteristics of the fabricated device with PZT nanofibers showed non-ohmic properties. The non-linear I–V characteristics at temperatures between 308 and 408 K indicate two distinct regions. Impedance spectroscopy indicated the presence of non-ideal Debye type behavior in \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers and was ascribed to the existence of heterogeneity in the sample. The measured capacitances were assigned to two electro-active regions in the prepared \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers. A proto-type piezoelectric nanogenerator based on PZT nanofibers was fabricated to study the piezoelectric properties of \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers. PZT nanofibers were aligned on interdigitated electrodes of silver wire, which demonstrated piezoelectric performance and delivered an output voltage of ~ 40 V under periodic stress applications.

Electricity generation based on vertically aligned PbZr 0.2 Ti 0.8 O 3 nanowire arrays

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

Piezoelectric nanogenerator using p-type ZnO nanowire arrays.

ZnO-ZnS heterojunction and ZnS nanowire arrays for electricity generation.

Thermo-Convective Solution Growth of Vertically Aligned Zinc Oxide Nanowire Arrays for Piezoelectric Energy Harvesting

Toward high output-power nanogenerator

Phosphorus Doped Zn1-xMgxO Nanowire Arrays

Nanowires for Piezoelectric Nanogenerators

Fabrication and characterization of $${\text{Pb}}({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}){\text{O}}_{3}$$ nanofibers for nanogenerator applications

Taper PbZr0.2Ti0.8O3 Nanowire Arrays: from Controlled Growth by Pulsed Laser Deposition to Piezopotential Measurements

Identifying Individual N- and P-Type ZnO Nanowires by the Output Voltage Sign of Piezoelectric Nanogenerator.

A High Power ZnO Thin Film Piezoelectric Generator

Enhanced Nanogenerator Performances of 1-D Al-Doped ZnO Nanorod Arrays through Ultrasonic Wave Systems

Area-Selective Growth of Zinc Oxide Nanowire Arrays for Piezoelectric Energy Harvesting

Hydrothermal Deposition of a Zinc Oxide Nanorod Array on a Carbon Nanotube Film As a Piezoelectric Generator

In situ observation of current generation in ZnO nanowire based nanogenerators using a CAFM integrated into an SEM.

Vertically Aligned Zno Nanoarray Directly Orientated on Cu Paper by H-Bn Monolayer for Flexible and Transparent Piezoelectric Nanogenerator

Biocompatible nanogenerators through high piezoelectric coefficient 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 nanowires for in-vivo applications.

Biocompatible Nanogenerators through High Piezoelectric Coefficient 0.5Ba(Zr<sub>0.2</sub>Ti<sub>0.8</sub>)O<sub>3</sub>-0.5(Ba<sub>0.7</sub>Ca<sub>0.3</sub>)TiO<sub>3</sub>Nanowires for In-Vivo Applications

Nanoembossing and Piezoelectricity of Ferroelectric Pb(Zr 0.3,ti 0.7)O 3 Nanowire Arrays

Modulating ZnO Growth Structures for Maximum Power Output of Hybrid Piezo/Triboelectric Nanogenerator