Abstract:Nanocomposites consisting of a flexible piezoelectric polymer and a reinforcing phase have shown great potential for constructing high-performance piezoelectric nanogenerators (PENGs). However, the weak interface and poor dispersion of piezoelectric reinforcing phase significantly impair the electromechanical properties (e.g., effective stress/strain, piezoelectric coefficients) of the nanocomposites, thus severely restricting the performance enhancement of the PENGs. In this study, we hydrothermally synthesized the piezoelectric reinforcing phase of BaTiO3 nanowires, and grafted a layer of high-modulus polymethyl methacrylate (PMMA) onto the nanowire surface via surface-initiated polymerization. The PMMA coating layer forms a strong interface between BaTiO3 nanowires and the polymer matrix [i.e., poly(vinylidenefluoride-co-trifluoroethylene)], which efficiently improves dispersion of the BaTiO3 nanowires and stress transfer at the interface, therefore resulting in an enhanced output performance in the fibrous nanocomposite PENGs. The output voltage and current of the PMMA encapsulated BaTiO3 (3) nanowires-based PENG can reach to 12.6 V and 1.30 μA, with a maximum output power of 4.25 μW, which is 2.2 times and 7.6 times higher than the PENG with unmodified BaTiO3 nanowires and the PENG without BaTiO3 nanowires, respectively. Furthermore, the flexible PENG exhibits great stability that could continuously generate stable electrical pulses for 6000 cycles without any decline. This study provides a feasible approach of interface tailoring for achieving high-performance piezoelectric nanocomposite and shows the promising potential of the fibrous nanocomposites in biomechanical energy harvesters and smart wearable sensors.

Biocompatible nanogenerators through high piezoelectric coefficient 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 nanowires for in-vivo applications.

Biocompatible Nanogenerators through High Piezoelectric Coefficient 0.5Ba(Zr<sub>0.2</sub>Ti<sub>0.8</sub>)O<sub>3</sub>-0.5(Ba<sub>0.7</sub>Ca<sub>0.3</sub>)TiO<sub>3</sub>Nanowires for In-Vivo Applications

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

Nanogenerators for biomedical applications

High-performance sono-piezoelectric nanocomposites enhanced by interfacial coupling effects for implantable nanogenerators and actuators

Polydimethylsiloxane/BaTiO3 Nanogenerators with a Surface-Assembled Mosaic Structure for Enhanced Piezoelectric Sensing

Nanowires for Piezoelectric Nanogenerators

Piezoelectric boron nitride nanosheets for high performance energy harvesting devices

A Biomimetic Nanogenerator to Enhance Bone Regeneration by Restoring Electric Microenvironments

The construction of BaTiO 3 -based core-shell composites for high-performance and flexible piezoelectric nanogenerators

A flexible and lead-free BCZT thin film nanogenerator for biocompatible energy harvesting

Piezoelectric nanogenerator using p-type ZnO nanowire arrays.

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators

A High Power ZnO Thin Film Piezoelectric Generator

Study of Long-Term Biocompatibility and Bio-Safety of Implantable Nanogenerators.

Electricity generation based on vertically aligned PbZr 0.2 Ti 0.8 O 3 nanowire arrays

A High Output Voltage Flexible Piezoelectric Nanogenerator Using Porous Lead-Free Knbo3 Nanofibers

Enhanced Piezoelectric Performance of the ZnO/AlN Stacked Nanofilm Nanogenerator Grown by Atomic Layer Deposition

Enhanced Nanogenerator Performances of 1-D Al-Doped ZnO Nanorod Arrays through Ultrasonic Wave Systems

Advancing High-Performance Piezoelectric Nanogenerators: Simple Electric Field Switching for Orientated and Aligned BaTiO 3 /PDMS Composite