Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

A Robotic Spraying Path Generation Algorithm for Free-Form Surface Based on Constant Coating Overlapping Width

An Optimization Approach for Path Planning of High-Quality and Uniform Additive Manufacturing

A New Point Cloud Slicing Based Path Planning Algorithm for Robotic Spray Painting.

Trajectory Planning Method Based On Transitional Segment Optimization Of Spray Painting Robot On Complex-Free Surface

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

Simulation Analysis of Coating at Uniform Velocity of Robotic Spray Gun

Algorithm of Non-isoparametric Path Generation for Ultrasonic Inspection of Sculptured Surfaces

Optimization of Spraying Distance and Coating Thickness of Spraying Robot

Research of surface reconstruction and path generation by ultrasonic inspection

Study of Free-Form Surface Non-Contact Measurement子Path Planning and Related Algorithms

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

A Spraying Path Planning Algorithm Based on Point Cloud Segmentation and Trajectory Sequence Optimization

Path Planning for Spray Painting Robot of Horns Surfaces in Ship Manufacturing

Multivariable Coating Thickness Distribution Model for Robotic Spray Painting

Coating Uniformity with a Uniform Robotic Spray Gun Velocity

Semantic Segmentation Based Spraying Trajectory Planning for Complex Product

Research on coating uniformity of unidirectional interleaving painting

Trajectory Planning of Spray Gun With Variable Posture for Irregular Plane Based on Boundary Constraint

Dynamic Numerical Simulation of Curved Surface Coating Trajectory Based on STL Slicing Algorithm

Variable Velocity Coating Thickness Distribution Model for Super-Large Planar Robot Spraying

The Influence of Spraying Angle on Robotic Trajectory Planning