Anisotropy in Lattice Thermal Conductivity Tensor of Bulk Hexagonal-Mt2 (M = W, Mo and T = S and Se) by First Principles Phonon Calculations

Yingchun Ding,Min Chen,Bing Xiao

DOI: https://doi.org/10.1039/c5ra25090k

IF: 4.036

2016-01-01

RSC Advances

Abstract:Anisotropies in phonon mean free path and thermal conductivity as a function of temperature are calculated for 2H-MT2 structures.

What problem does this paper attempt to address?

First-principles Study of the Phonon Vibrational Spectra and Thermal Properties of Hexagonal MoS2

Jiaonan Yuan,Zhenlong Lv,Qing Lu,Yan Cheng,Xiangrong Chen,Lingcang Cai

DOI: https://doi.org/10.1016/j.solidstatesciences.2014.12.004

IF: 3.752

2015-01-01

Solid State Sciences

Abstract:The phonon spectra and thermal properties of the hexagonal MoS2 are investigated by using first-principles calculations within the density functional theory (DFT). Finite displacement method is used to calculate the phonon vibrational spectra and phonon density of states. The vibrational modes at the Gamma point are analyzed by using group theory. The temperature and pressure dependence of its thermal quantities such as the thermal expansion, the heat capacity at constant volume, the Gibbs energy and entropy are obtained based on the quasi-harmonic approximation (QHA). Our results show that both the thermal expansion coefficient α and the heat capacity CV increase with T3 at low temperatures and gradually turn almost linear as the temperature increases. It is found that the entropy is sensitive to the temperature while the Gibbs free energy is more sensitive to the pressure change.
Anisotropic Lattice Thermal Conductivity In Topological Semimetal Zrgex (X = S, Se, Te): A First-Principles Study

Yu Zhou,A-Kun Liang,Zhao-Yi Zeng,Xiang-Rong Chen,HuaYun Geng

DOI: https://doi.org/10.1088/1361-648X/abd8b9

2021-01-01

Abstract:Topological semimetals have attracted significant attentions owing to their potential applications in numerous fields such as low-power electron devices and quantum computation, which are closely related to their thermal transport properties. In this work, the phonon transport properties of topological Dirac nodal-line semimetals ZrGeX (X = S, Se, Te) with the PbClF-type structures are systematically studied using the first-principles calculations combined with the Boltzmann transport theory. The obtained lattice thermal conductivities show an obvious anisotropy, which is caused by the layer structures of ZrGeX (X = S, Se, Te). The room-temperature lattice conductivity of ZrGeTe along c direction is found to be as low as 0.24 W m(-1) K-1, indicating that it could be of great significance in the fields of thermal coating materials and solar cell absorber. In addition, we extract each phonon branch from group velocities, phonon scattering rates, Gruneisen parameters, and phase space volumes to investigate the mechanism underlying the low thermal conductivity. It is concluded that the difference of thermal conductivities of three materials may be caused by the number of scattering channels and the effect of anharmonic. Furthermore, the phonon mean free path along a direction is relatively longer. Nanostructures or polycrystalline structures may be effective to reduce the thermal conductivity and improve the thermoelectric properties.
Thermal Expansion Tensors, Grüneisen Parameters and Phonon Velocities of Bulk MT2 (M = W and Mo; T = S and Se) from First Principles Calculations

Yingchun Ding,Bing Xiao

DOI: https://doi.org/10.1039/c4ra16966b

IF: 4.036

2015-01-01

RSC Advances

Abstract:The thermal properties of 2H-MT2 (M = W/Mo, T = S/Se) structures are calculated using the quasi-harmonic approximation based on phonon spectra.
Anisotropic Electrical and Lattice Transport Properties of Ordered Quaternary Phases Cr2tialc2 and Mo2tialc2: A First Principles Study

Y. F. Li,Y. C. Ding,B. Xiao,Y. H. Cheng

DOI: https://doi.org/10.1016/j.physleta.2016.09.015

IF: 2.707

2016-01-01

Physics Letters A

Abstract:Electrical conductivities of Cr2TiAlC2 and Cr2TiAlC2 in a and c directions are calculated from semi-classic Boltzmann transport theory. The values are found to be sigma(a) = 5.68 x 10(5) S/m (6.56 x 10(5) S/m) and sigma(c) = 2.15 x 10(5) S/m (2.69 x 10(5) S/m) for Cr2TiAlC2 (Cr2TiAlC2) at 300 K. Using the phonon-mode Debye temperature and Slack-model, the lattice thermal conductivities in the two directions are also evaluated, and the values are kappa(a) = 18.71 W/mK (16.11 W/mK) and kappa(c) = 0.48 W/m K (0.25 W/m K) for Cr2TiAlC2 (Cr2TiAlC2) at room temperature. The anisotropy in lattice thermal conductivity is found to be stronger than that of electrical conductivity. The predicted Seebeck coefficients and thermoelectric figure of merit (ZT) indicate that they are poor thermoelectric materials. Due to the relatively high conductivities, they might be used to fabricate high temperature conductive components in aerospace industry. In addition, our results in a direction have the direct implications for the relevant properties of MXenes (Cr2TiC2 and Mo2TiC2), produced from their bulk phases. (C) 2016 Elsevier B.V. All rights reserved.
Roles of Mass, Structure, and Bond Strength in the Phonon Properties and Lattice Anharmonicity of Single-Layer Mo and W Dichalcogenides

Liang-Feng Huang,Zhi Zeng

DOI: https://doi.org/10.1021/acs.jpcc.5b04669

2015-01-01

Abstract:A hierarchical first-principles study has been performed to reveal the roles of mass, structure, and atomic bond strength in phonon spectra, phonon anharmonicity, thermal expansion, and thermomechanics of single-layer Mo and W dichalcogenides (MX2, X = S, Se, and Te). The strength of the M-X bond is determined by the competition between ionicity and covalency and increases (decreases) with increasing the cation 1 (anion) nucleon number. The total mass and cation anion mass ratio isotopically influence phonon frequencies. The twofold lattice dimensionality renders the bending ZA mode with parabolic dispersion and negative Gruneisen constant (gamma). While nonorthogonal bonds lead to interdirection vibrational hybridizations, which increases yz, but decreases ITA and y. The minima of gamma(ZA) and gamma(LA) decrease with decreasing bond strength and become negative in MTe2. MX, always has a negative thermal expansion at low temperatures (T < 50 K) due to the advanced excitation of those low negative-gamma ZA modes. At higher temperatures, the excitation of other positive-y modes results in positive thermal expansion. Additionally, thermal expansion is determined jointly by lattice stiffness, phonon excitation, and phonon anharmonicity. The contributions of these involved factors are quantitatively disentangled here, and their relationships with mass, structure, and bond strength are revealed. The softening of the bulk modulus of MX2, under heating is mainly caused by thermal expansion, which is partially canceled by the stiffening effect from phonon excitation. Both bulk modulus and its thermal softening rate decrease with anion nucleon number, due to the decrease in bond strength and bond-strength anharmonicity, respectively.
Nonperturbative phonon scatterings and the two-channel thermal transport in Tl<sub>3</sub>VSe<sub>4</sub>

Zezhu Zeng,Cunzhi Zhang,Yi Xia,Zheyong Fan,Chris Wolverton,Yue Chen

DOI: https://doi.org/10.1103/PhysRevB.103.224307

IF: 3.7

2021-01-01

Physical Review B

Abstract:We study the role of nonperturbative phonon scattering in strongly anharmonic materials having ultralow lattice thermal conductivity with unusual temperature dependence. We take Tl3VSe4 as an example and investigate its lattice dynamics using perturbation theory (PT) up to the fourth order and molecular dynamics (MD) with a machine-learning potential. We find distinct differences of phonon linewidth between PT and MD in the whole Brillouin zone. The comparison between the theoretical phonon linewidths and experiments suggests that PT severely underestimates the phonon scatterings, even when the fourth-order anharmonicity is included. Moreover, we extend our calculations to higher temperatures and evaluate the two-channel thermal conductivity based on the unified theory developed by Simoncelli et al. [Nat. Phys. 15, 809 (2019)]. We find a crucial coherence contribution to the total thermal conductivity at high temperatures. Our results pave the path for future studies of phonon properties and lattice thermal conductivities of strongly anharmonic crystals beyond the conventional PT realm.
First-Principles Study of Lattice Thermal Conductivity of Td-WTe2

Gang Liu,Hong Yi Sun,Jian Zhou,Qing Fang Li,X. G. Wan

DOI: https://doi.org/10.48550/arXiv.1509.03481

2015-09-11

Mesoscale and Nanoscale Physics

Abstract:The structural and thermal properties of bulk Td-WTe2 have been studied by using first-principles calculations. We find that the lattice thermal conductivity of WTe2 is anisotropic, with the highest value along a-axis and lowest one along the c-axis at 300 K. Our calculated size dependent thermal conductivity shows that nanostructuring of WTe2 can possibly further decrease the lattice thermal conductivity. Such extremely low thermal conductivity, even much lower than WSe2, makes WTe2 attractive for use as thermal-insulation material for thermoelectric devices.
First-principles Study on Phonon Transport Properties of MoTe2 and WTe2 Monolayers in Different Phases

Jinhan Shen,Dan Han,Bowen Zhang,Rongxing Cao,Yang Liu,Shu Zheng,Hongxia Li,Yuqi Jiang,Yuxiong Xue,Mengyun Xue

DOI: https://doi.org/10.1016/j.physe.2022.115509

IF: 3.369

2022-01-01

Physica E Low-dimensional Systems and Nanostructures

Abstract:Phase engineering of two-dimensional (2D) transition metal dichalcogenides (TMDC) monolayer is a key method for manipulating the lattice thermal conductivity. In this paper, we investigate the phonon thermal transport properties of MoTe2 and WTe2 monolayers with H and T ' phases (H-TMDC and T '-TMDC) via first-principles calculations. H-MoTe2 and H-WTe2 monolayers have isotropic lattice thermal conductivities, whereas the lattice thermal conductivities of T '-MoTe2 and T '-WTe2 monolayers are highly anisotropic. Meanwhile, in comparison with the H phase, the maximal lattice thermal conductivity in T ' phase has a reduction of 83.85% and 77.92% at 300 K for MoTe2 and WTe2 monolayers, respectively. Furthermore, we observe that phonon heat capacities and phonon lifetimes of T '-TMDC monolayers are lower than those of H-TMDC monolayers, while the phonon group velocities of T '-TMDC monolayers are larger. Hence, the competitive relationship among these parameters leads to a lower lattice thermal conductivity of the T '-TMDC monolayer. In addition, lower critical phonon MFPs (mean free path) of T '-TMDC monolayers prove that the lattice thermal conductivity has a weaker size dependence. These findings demonstrate that MoTe2 and WTe2 monolayers with different phases have a great potential in 2D nanoelectronic devices.
In-Plane Anisotropic Thermal Conductivity of Few-Layered Transition Metal Dichalcogenide Td-WTe2

Yu Chen,Bo Peng,Chunxiao Cong,Jingzhi Shang,Lishu Wu,Weihuang Yang,Jiadong Zhou,Peng Yu,Hongbo Zhang,Yanlong Wang,Chenji Zou,Jing Zhang,Sheng Liu,Qihua Xiong,Hezhu Shao,Zheng Liu,Hao Zhang,Wei Huang,Ting Yu

DOI: https://doi.org/10.1002/adma.201804979

IF: 29.4

2019-01-01

Advanced Materials

Abstract:2D Td-WTe2 has attracted increasing attention due to its promising applications in spintronic, field-effect chiral, and high-efficiency thermoelectric devices. It is known that thermal conductivity plays a crucial role in condensed matter devices, especially in 2D systems where phonons, electrons, and magnons are highly confined and coupled. This work reports the first experimental evidence of in-plane anisotropic thermal conductivities in suspended Td-WTe2 samples of different thicknesses, and is also the first demonstration of such anisotropy in 2D transition metal dichalcogenides. The results reveal an obvious anisotropy in the thermal conductivities between the zigzag and armchair axes. The theoretical calculation implies that the in-plane anisotropy is attributed to the different mean free paths along the two orientations. As thickness decreases, the phonon-boundary scattering increases faster along the armchair direction, resulting in stronger anisotropy. The findings here are crucial for developing efficient thermal management schemes when engineering thermal-related applications of a 2D system.
Phononic transport in 1T prime-MoTe2: anisotropic structure with an isotropic lattice thermal conductivity

Xiangyue Cui,Xuefei Yan,Bowen Wang,Yongqing Cai

DOI: https://doi.org/10.1016/j.apsusc.2022.155238

2023-07-10

Abstract:Molybdenum ditelluride (MoTe2) is an unique transition metal dichalcogenide owing to its energetically comparable 1H and 1T prime phases. This implies a high chance of coexistence of 1H-1T prime heterostructures which poses great complexity in the measurement of the intrinsic lattice thermal conductivities (kappa). In this work, via first-principles calculations, we examine the lattice-wave propagation and thermal conduction in this highly structurally anisotropic 1T prime MoTe2. Our calculation shows that the 1T prime phase has a sound velocity of 2.13 km/s (longitudinal acoustic wave), much lower than that of the 1H phase (4.05 km /s), indicating a staggered transmission of lattice waves across the boundary from 1H to 1T prime phase. Interestingly, the highly anisotropic 1T prime MoTe2 shows nearly isotropic and limited kappa_L of 13.02 W/mK, owing to a large Gruneisen parameter of acoustic flexural mode, heavy masses of Mo and Te elements and a low phonon group velocity. Accumulative kappa_L as a function of mean free path (MFP) indicates phonons with MFP less than ~300 nm contribute 80% of kappa_L and an inflection point at ~600 nm. Our results will be critical for understanding of the size dependent kappa_L of nanostructured 1T prime MoTe2.

Materials Science
Structural and anisotropic elastic properties of hexagonal MP (M = Ti, Zr, Hf) monophosphides determined by first-principles calculations

Runyue Li,Yonghua Duan,Runyue Li,Yonghua Duan

DOI: https://doi.org/10.1080/14786435.2016.1234081

2016-09-21

Abstract:First-principles calculations were performed to investigate the structural properties, phase stabilities, elastic properties and thermal conductivities of MP (M = Ti, Zr, Hf) monophosphides. These monophosphides are thermodynamically and mechanically stable. Values for the bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν were calculated by Voigt–Reuss–Hill approximation. The mechanical anisotropy was discussed via several anisotropy indices and three-dimensional (3D) surface constructions. The order of elastic anisotropy is ZrP > HfP > TiP. The minimum thermal conductivities of these monophosphides were investigated using Clarke’s model and Cahill’s model. The results revealed that these monophosphides are suitable for use as thermal insulating materials and that their minimum thermal conductivities are anisotropic.

materials science, multidisciplinary,physics, applied, condensed matter,metallurgy & metallurgical engineering
Thermal Conductivity of Monolayer MoS2, MoSe2, and WS2: Interplay of Mass Effect, Interatomic Bonding and Anharmonicity

Bo Peng,Hao Zhang,Hezhu Shao,Yuchen Xu,Xiangchao Zhang,Heyuan Zhu

DOI: https://doi.org/10.1039/c5ra19747c

IF: 4.036

2016-01-01

RSC Advances

Abstract:Phonons are essential for understanding the thermal properties in monolayer transition metal dichalcogenides, which limit their thermal performance for potential applications. We investigate the lattice dynamics and thermodynamic properties of MoS2, MoSe2, and WS2 by first principles calculations. The obtained phonon frequencies and thermal conductivities agree well with the measurements. Our results show that the thermal conductivity of MoS2 is highest among the three materials due to its much lower average atomic mass. We also discuss the competition between mass effect, interatomic bonding and anharmonic vibrations in determining the thermal conductivity of WS2. Strong covalent W-S bonding and low anharmonicity in WS2 are found to be crucial in understanding its much higher thermal conductivity compared to MoSe2.
Elastic anisotropy and its temperature dependence for cubic crystals revealed by molecular dynamics simulations

Haojie Mei,Feifei Wang,Jinfu Li,Lingti Kong

DOI: https://doi.org/10.1088/1361-651X/ace541

IF: 2.421

2023-01-01

Modelling and Simulation in Materials Science and Engineering

Abstract:The temperature dependent phonon dispersions of BCC iron and tungsten were measured by running molecular dynamics simulations, based on which the elastic constants and elastic anisotropy were derived. It is found that the elastic constants decrease with increasing the temperature, while the elastic anisotropy generally enhances. Detailed analysis reveals that the lattice thermal expansion effect dominates the decreasing of elastic constants, which also tends to weaken the elastic anisotropy. Meanwhile, the lattice thermal vibration effect lowers the elastic constants related to the longitudinal waves, while has little impact on other elastic constants, thereby enhancing the elastic anisotropy. The overall effect of temperature on the elastic anisotropy in turn depends on the competition/compromise between the lattice thermal expansion and the thermal vibrations.
Anisotropic phonon transport and lattice thermal conductivities in tin dichalcogenides SnS2 and SnSe2

Haifeng Wang,Yan Gao,Gang Liu

DOI: https://doi.org/10.1039/c6ra27761f

IF: 4.036

2017-01-01

RSC Advances

Abstract:In recent years, layered semiconductor tin dichalcogenides, SnX2 (X = S and Se), have received great attention owing to their wide applications in numerous fields. However, theoretical studies on their phonon transport properties and lattice thermal conductivities are very rare. Herein, we carry out comprehensive investigations on the phonon transport properties and heat transfer phenomena in tin dichalcogenides using first-principles calculations combined with the Boltzmann transport theory, and compare them with the recent popular thermoelectric materials SnS (SnSe) and widely studied typical TMD MoS2 (MoSe2). The obtained total thermal conductivities of SnS2 and SnSe2 agree well with the experimental measured values. The ultralow out-of-plane thermal conductivities of both materials may be useful for thermoelectric applications. The contributions of different phonon branches to the total lattice thermal conductivities are evaluated, and the results suggest that it would be difficult for alloying to reduce kappa(L) because the contribution of the optical branches is rather small compared with SnS and SnSe. Subsequently, we investigated the size dependence of the thermal conductivities and found that nanostructuring may be efficient to further reduce kappa(L) since the mean free paths of the dominant phonon modes are relatively long. This conclusion is consistent with recent experimental findings, where the kappa(L) of SnS2 was found to evidently decrease with a decrease in the thickness of SnS2 films. We believe that this phenomenon may also exist in SnSe2, which may demonstrate a much better thermoelectric performance than that of SnS2 because of its higher anharmonicity than that of SnS2, leading to much lower thermal conductivity.
Strong anisotropic thermal conductivity of monolayer WTe2

Ma, Jinlong,Chen, Yani,Han, Zheng,Li, Wu

DOI: https://doi.org/10.1088/2053-1583/3/4/045010

IF: 6.861

2016-01-01

2D Materials

Abstract:Tungsten ditelluride (WTe2) has attracted increasing attention due to its large magnetoresistance and pressure-induced superconductivity. In this work, we investigate the thermal conductivity (kappa) of monolayer WTe2 by performing first-principles calculations, and find strong anisotropic kappa with predicted room-temperature values of 9 and 20 W m(-1) K-1 along two principal lattice directions, respectively. Such strong anisotropy suggests the importance of orientation when engineering thermal-related applications based on WTe2. The anisotropy of. is attributed to the in-plane linear acoustic phonon branches, while the out-of-plane quadratic acoustic phonon branch is almost isotropic. The size dependence of kappa shows that the size effect can persists up to 10 mu m, and the anisotropy decreases with decreasing sample size due to the suppression of low-frequency anisotropic phonons by boundary scattering.
Probing Anisotropic Thermal Conductivity of Transition Metal Dichalcogenides MX2 (M = Mo, W and X = S, Se) using Time‐Domain Thermoreflectance

Ronggui Yang,Xin Qian,Xiaokun Gu,P. Jiang

DOI: https://doi.org/10.1002/adma.201701068

2017-09-01

Advances in Materials

Abstract:Transition metal dichalcogenides (TMDs) are a group of layered 2D semiconductors that have shown many intriguing electrical and optical properties. However, the thermal transport properties in TMDs are not well understood due to the challenges in characterizing anisotropic thermal conductivity. Here, a variable‐spot‐size time‐domain thermoreflectance approach is developed to simultaneously measure both the in‐plane and the through‐plane thermal conductivity of four kinds of layered TMDs (MoS2, WS2, MoSe2, and WSe2) over a wide temperature range, 80–300 K. Interestingly, it is found that both the through‐plane thermal conductivity and the Al/TMD interface conductance depend on the modulation frequency of the pump beam for all these four compounds. The frequency‐dependent thermal properties are attributed to the nonequilibrium thermal resistance between the different groups of phonons in the substrate. A two‐channel thermal model is used to analyze the nonequilibrium phonon transport and to derive the intrinsic thermal conductivity at the thermal equilibrium limit. The measurements of the thermal conductivities of bulk TMDs serve as an important benchmark for understanding the thermal conductivity of single‐ and few‐layer TMDs.

Medicine,Physics,Materials Science
Ultralow Lattice Thermal Conductivity of Binary Compounds A2B (A = Cs, Rb & B = Se, Te) with Higher-Order Anharmonicity Correction.

Shuming Zeng,Lei Fang,Yusong Tu,M. Zulfiqar,Geng Li

DOI: https://doi.org/10.1039/d2cp05542b

IF: 3.3

2023-01-01

Physical Chemistry Chemical Physics

Abstract:By employing first-principles calculations that integrate self-consistent phonon theory and the Boltzmann transport equation, we have delved into the thermal transport characteristics of hexagonal anisotropic materials A2B (A = Cs, Rb and B = Se, Te). Our computational results have disclosed that these A2B materials exhibit ultralow lattice thermal conductivity (κL) at room temperature. Specifically, in the case of Cs2Te, the κL values are a mere 0.15 W m-1 K-1 in the a(b) direction and 0.22 W m-1 K-1 in the c direction, both markedly less than the thermal conductivity of quartz glass, a conventional thermoelectric material (0.9 W m-1 K-1). Importantly, our calculations encompass higher-order anharmonic effects while computing the lattice thermal conductivities of these materials. This is essential since pronounced anharmonicity leads to a decrease in phonon group velocity, and consequently, lowers the κL values. Our results establish a theoretical foundation for exploring the thermal transport characteristics of anisotropic materials with substantial anharmonicity. Furthermore, the binary compounds A2B proffer a gamut of possibilities for a wide range of applications in thermoelectrics and thermal management, owing to their ultralow lattice thermal conductivity.
Four-phonon Scattering and Thermal Transport in 2H–mote2

Haichang Guo,Wujuan Yan,Jie Sun,Yu Pan,Haiyu He,Yufeng Zhang,Fuwei Yang,Yuxi Wang,Chenxin Zhang,Ruijie Li,Lei Liu,Shulin Bai,Wei Wang,Yu Ye,Te-Huan Liu,Junichiro Shiomi,Xing Zhang,Bai Song

DOI: https://doi.org/10.1016/j.mtphys.2023.101314

IF: 11.021

2024-01-01

Materials Today Physics

Abstract:Among two-dimensional (2D) transition metal dichalcogenides, molybdenum ditelluride (MoTe2) is of great interest to achieving unique functionalities in diverse electronic, photonic, and phononic devices. Despite extensive studies over the past decade, the thermal transport properties and mechanisms of MoTe2 remain largely unclear. Here, we grow few-layer (7L, 10L, and 17L) single-crystalline 2H-MoTe2 and measure their in-plane thermal conductivities using an optothermal Raman technique. The room-temperature values range from 4 to 9 W m-1 K-1, substantially lower than theoretical predictions considering only three-phonon scattering. By employing first-principles calculations and machine learning-assisted molecular dynamics simulations, we reveal that four-phonon scattering could suppress the thermal conductivity of 2H-MoTe2 by 80%, which agrees with experimental measurement and is mainly attributed to the flexural acoustic modes. Thickness-dependent suppression is observed owing to the varying reflection symmetry. Our work highlights higher-order phonon-phonon interactions in 2D materials and offers guidance for the thermal design of emerging devices.
Anharmonic Lattice Dynamics of Te and Its Counter-Intuitive Strain Dependent Lattice Thermal Conductivity

Shasha Li,Jie Ma,Yanzhong Pei,Yue Chen

DOI: https://doi.org/10.1039/c9tc01253b

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:The lattice thermal conductivity of Te is found to show counter-intuitive strain dependence under uniaxial strains.
A systematic investigation of thermal conductivities of transition metal dichalcogenides

Zhongwei Zhang,Yuee Xie,Yulou Ouyang,Yuanping Chen

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.041

2016-12-16

Abstract:The thermal conductivities of MoS2 and WS2 have been reported by some experimental and theoretical studies, however, the results are different from each other. Here, thermal transport properties of twelve types of single layer transition metal dichalcogenides (TMDs) MX2 (M = Cr, Mo, W; X = O, S, Se, Te) are investigated systematically, by solving Boltzmann transport equation based on first-principle calculations. After accurate considering the size effect and boundary scattering, we find that our calculations can fit the former experimental results well. Moreover, diverse transport properties in TMDs are revealed, and an abnormal dependence of thermal conductivity on atomic mass is observed. In most MX2 structures, the thermal conductivities decrease with the increase of mass of atom M or X. However, the thermal conductivities of sulfides MS2 and selenides MSe2 increase as M changes from Cr to Mo to W, which is contradictory to our traditional understanding. A detailed calculation indicates that the abnormal trend is originated from the rapid increase of phonon relaxation time. Our studies provide important data and effective mechanism for thermal transport in TMDs.

Computational Physics,Materials Science

Anisotropy in Lattice Thermal Conductivity Tensor of Bulk Hexagonal-Mt2 (M = W, Mo and T = S and Se) by First Principles Phonon Calculations

First-principles Study of the Phonon Vibrational Spectra and Thermal Properties of Hexagonal MoS2

Anisotropic Lattice Thermal Conductivity In Topological Semimetal Zrgex (X = S, Se, Te): A First-Principles Study

Thermal Expansion Tensors, Grüneisen Parameters and Phonon Velocities of Bulk MT2 (M = W and Mo; T = S and Se) from First Principles Calculations

Anisotropic Electrical and Lattice Transport Properties of Ordered Quaternary Phases Cr2tialc2 and Mo2tialc2: A First Principles Study

Roles of Mass, Structure, and Bond Strength in the Phonon Properties and Lattice Anharmonicity of Single-Layer Mo and W Dichalcogenides

Nonperturbative phonon scatterings and the two-channel thermal transport in Tl<sub>3</sub>VSe<sub>4</sub>

First-Principles Study of Lattice Thermal Conductivity of Td-WTe2

First-principles Study on Phonon Transport Properties of MoTe2 and WTe2 Monolayers in Different Phases

In-Plane Anisotropic Thermal Conductivity of Few-Layered Transition Metal Dichalcogenide Td-WTe2

Phononic transport in 1T prime-MoTe2: anisotropic structure with an isotropic lattice thermal conductivity

Structural and anisotropic elastic properties of hexagonal MP (M = Ti, Zr, Hf) monophosphides determined by first-principles calculations

Thermal Conductivity of Monolayer MoS2, MoSe2, and WS2: Interplay of Mass Effect, Interatomic Bonding and Anharmonicity

Elastic anisotropy and its temperature dependence for cubic crystals revealed by molecular dynamics simulations

Anisotropic phonon transport and lattice thermal conductivities in tin dichalcogenides SnS2 and SnSe2

Strong anisotropic thermal conductivity of monolayer WTe2

Probing Anisotropic Thermal Conductivity of Transition Metal Dichalcogenides MX2 (M = Mo, W and X = S, Se) using Time‐Domain Thermoreflectance

Ultralow Lattice Thermal Conductivity of Binary Compounds A2B (A = Cs, Rb & B = Se, Te) with Higher-Order Anharmonicity Correction.

Four-phonon Scattering and Thermal Transport in 2H–mote2

Anharmonic Lattice Dynamics of Te and Its Counter-Intuitive Strain Dependent Lattice Thermal Conductivity

A systematic investigation of thermal conductivities of transition metal dichalcogenides