Abstract:Modern gas turbine rotors are usually designed as combined rotors in which disks are tied together by one central tie rod or several tie rods distributed along the circumference. This structure has the advantages in cooling design, light weight and processing assembly, however it brings some problems and challenges in predicting the dynamic characteristics of rotor.No matter how many tie rods are used to fasten the disks, the rotor is not an integral or continuous structure any more. The contact effects between contact faces and the pretightening forces of tie rods have great influence on the rotor's dynamic behaviors. Traditional methods to calculate the critical speed in rotor dynamics such as Transfer Matrix Method and 2D Finite Element Method (FEM), based on the integral and continuous rotor, fail to consider factors of the contact effects and the pre-tightening forces of tie rods. Although the 3-D FEM can exactly calculate the critical speed, it is still time and resource consuming to establish and calculate such complex three-dimensional structures, even on the most advanced computers at present.In this paper, the traditional 2-D FEM is improved by considering the contact effects and pre-tightening forces of tie rods. Contact faces in the rotor are dealt as elements with equivalent stiffness but without mass, thus the rotor-bearing system of gas turbine are composed of contact elements, elastic elements, rigid disk elements and bearing elements. According to the improved 2-D FEM, a program is developed to calculate the critical speed and unbalance response of gas turbine rotors. The equivalent stiffness, serving as an important input parameter in the program and elements in the stiffness matrix of the system, is mainly determined by the contact stiffness between contact faces and the pre-tightening force. To find out relationships between them, GW (Greenwood and Williamson) statistical model is used and the equivalent stiffness of complex contact faces is obtained.According to the results, certain curves showing the relationship between equivalent stiffness of contact surface and pre-tightening force are obtained. By these curves and the program, we can easily calculate the dynamic characteristics of gas turbine rotors with satisfying accuracy and less time. To validate this method, the critical speed of a real rotor of a certain gas turbine was calculated with the program and curves, and the results agree well with the measured data.

Influence of Temperature Distribution on Tighten Force in Tie-Bolt Fastened Rotor with Considering Thermal Contact Conductance

Thermally Induced Variation of Bolt Load Considering Thermal Contact Resistance

Rotor Dynamic Analysis of Tie-Bolt Fastened Rotor Based on Elastic-Plastic Contact

Thermal Effects on the Tensile Forces of Rods in Rod-Fastened Rotor of Heavy-Duty Gas Turbine

The Steady-State Thermal Effect On Rotordynamics Of A Rod-Fastened Rotor-Bearing System

The steady-state thermal effect on dynamic characteristics of gas turbine rotor considering contact effect

Effects Of Bending Moments And Pre-Tightening Forces On The Flexural Stiffness Of Contact Interfaces In Rod-Fastened Rotors

Dynamical Analysis On Circumferential Rod Fastening Rotor System In Heavy-Duty Gas Turbine

Effects of Different Friction Coefficients on Input Torque Distribution in the Bolt Tightening Process Based on the Energy Method

Thermal analysis for fast start up of non-continuous rotor considering thermal contact resistance

Establishment of a contact stiffness matrix and its effect on the dynamic behavior of rod-fastening rotor bearing system

Finite element analysis of bolted joints under torsional loads

Determination of Contact Stiffness and Damping of a Tie-Bolt Rotor with Interference Fits Using Model Updating with Thin-Layer Elements

Dynamic Modeling of Tie-bolt Rotors via Fractal Contact Theory and Virtual Material Method

Modal Analysis for a Rod-Fastened Rotor Considering Contact Effect Based on Double Fractal Model

Dynamics of a Rod-Fastened Rotor Considering the Bolt Loosening Effect

Model Updating and Global Eigenvalue Analysis of a Tie-Bolt Rotor Using Zero-Length Contact Elements under Different Preloads

Torsional Fretting Wear of Annular Flat-Flat Contact Interface under Different Road Clamping Force and Torque

Determination of Preload Force of Circumferential Distributed Rod Fastening Rotor

Analysis Of Dynamic Characteristics Of Gas Turbine Rotor Considering Contact Effects And Pre-Tightening Force

Equivalent thin-layer temperature field model (ETTM) for bolted rotors to describe interface temperature jump