Abstract:A lattice temperature model is derived for oxide-confined vertical cavity surface emitting lasers (VCSELs) based on carrier transport and the conservation of energy. Peltier heat is caused by the bandedge and quasi-Fermi level discontinuities at a heterojunction. However, considering the device size, Peltier heat needs to be distributed and is not just generated at the interface, otherwise, an anomolous spike in temperature will occur. We have developed a novel treatment to model the Peltier heat at a heterojunction by use of a Monte Carlo simulation. Peltier heat is found to be a major heat contributor, and it results in a rapid and high temperature rise in the separate confinement heterostructure (SCH) region of the laser diode. We have also shown that the carrier thermal conductivities for materials with high mobilities must be included at high carrier densities because they contribute to additional spreading of the thermal energy. Subsequently, this lattice temperature model is coupled self-consistently to electronic and optical solvers to form a complete simulator for VCSELs. Self-heating causes a fast temperature rise when the VCSEL is operated under continuous wave conditions, causing resonant wavelength changes and an eventual thermal rollover. The resonant wavelength shift has been shown to be caused mainly by the heating of the distributed Bragg reflectors even though the peak temperature occurs within the SCH region. Possible physical factors causing the thermal rollover have also been examined with our complete simulator. The Auger recombination process is found to be one of the main factors causing the thermal rollover in 980 nm oxide-confined VCSELs while the photon lifetime is a factor in determining the position of the thermal rollover. We have also achieved a very good match between our simulated results and experimental data.

Thermal Model of Phosphor Self-Heating in Phosphor-Converted Light-Emitting Diodes

Phosphor self-heating in phosphor converted light emitting diode packaging

Particle based investigation of self-heating effect of phosphor particles in phosphor converted light emitting diodes

Structural Design of New Ce3+/Eu2+-doped or Co-Doped Phosphors with Excellent Thermal Stabilities for WLEDs

Thermal Design Based on Thermosyphon Heat Sink of High-Power LED Street Light

Lattice Temperature Model and Temperature Effects in Oxide-Confined VCSEL’s

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Thermal Simulation for High Power LED Systems with Remote Phosphor Layer

Effective Thermal Conductivity of Silicone/Phosphor Composites

Photo-thermal Modeling of Laser–phosphor Interaction in Laser Lighting

Thermal Design of Rectangular Microscale Inorganic Light-Emitting Diodes

Thermal Management for Microscale Inorganic Light-Emitting Diodes

Thermal Management of Micro-Scale Inorganic Light-Emittng Diodes on an Orthotropic Substrate for Biointegrated Applications

Opto-thermal simulation model for optimizing laser-excited remote phosphor systems

Analytical Model of Thermal Field in Polymer Thermo-Optic Devices

3D Thermal Analysis of Rectangular Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Three-dimensional thermal analysis of rectangular micro-scale inorganic light-emitting diodes integrated with human skin

Thermal Properties of Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Investigation of Mechanical Properties of Silicone/Phosphor Composite Used in Light Emitting Diodes Package

On the determination of the temperature distribution within the color conversion elements of phosphor converted LEDs

Three-dimensional Thermal Analysis of Wirelessly Powered Light-Emitting Systems