Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Acoustic field distribution of sawtooth wave with nonlinear SBE model

Sound Field Prediction of Ultrasonic Lithotripsy in Water with Spheroidal Beam Equations

Modeling of Shock Wave Generated from A Strong Focused Ultrasound Transducer

Seismic stress path induced by obliquely incident waves and its simulation

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Simulation of the Borehole Quasistatic Electric Field Excited by the Acoustic Wave During Logging While Drilling Due to Electrokinetic Effect

Effect of the Sound Source Position Error on Distribution Characteristics of Underwater Shock Wave Bunching Sound Field

Borehole and crosshole seismic wave field forward modeling

Quantitative assessment of acoustic field characteristics in water by radial extracorporeal shockwave therapy

Study on the Bulk Wave Radiation of Finite-Length Saw Devices Using Fem/Bem

Theoretical Prediction of the Acoustical Nonlinear Field Radiated from A Concave Focusing Source with A Wide Aperture Angle

Influence of Coupling with Shear Horizontal Surface Acoustic Wave on Lateral Propagation of Rayleigh Surface Acoustic Wave on 128 Degrees Yx-Linbo3

温度补偿型声表面波谐振器的非线性分析

Modeling and Analysis of Surface Wave EMAT and Its Acoustic Field

A Modeling Approach to Predict Acoustic Nonlinear Field Generated by a Transmitter with an Aluminum Lens.

Geometric Nonlinear Model for Prediction of Frequency-Temperature Behavior of SAW Devices for Nanosensor Applications

Peridynamic modeling of nonlinear surface acoustic waves propagating in orthotropic materials

Predictive Simulation Of Nonlinear Ultrasonics

Simulation of Particle Transportation Trajectory in Acoustic Standing Wave Field

Nonlinear large deformation of a spherical red blood cell induced by ultrasonic standing wave

Analysis of seawater-sediment-bedrock interaction model under obliquely incident P-SV waves with arbitrary angles