Abstract:An embeddable, robust and cost-effective optical interferometric strain sensor with nano-scale strain resolution is reported in this paper. The principal structure of the sensor consists of an optical fiber, a quartz rod coated with a thin gold layer, and two metal shells employed to transfer the strain, orient and protect the optical fiber and quartz rod. The optical fiber endface, combining with the gold-coated surface forms an extrinsic Fabry-Perot interferometer. When the sensor is subjected to an external compressive/tensile stress, slide between the two metal shells will occur, resulting in a cavity length variation of the interferometer. A temperature compensation design is employed in the structure to minimize the temperature crosstalk of the sensor. The sensor was firstly calibrated, and the result showed that our prototype sensor can realize a measurement resolution of 30 nanostrain (n) and a sensitivity of 10.01 /m over a range of 1000 . After calibration of the sensor, monitoring the shrinkage strain of a cubic brick of mortar in real time during the drying process was conducted. The strain sensor was compared with a commercial linear variable displacement transducer, and the comparison results in four weeks demonstrated that our sensor had much higher measurement resolution and gained more detailed and useful information. Due to the advantages of the extremely simple, robust and cost-effective configuration, it is believed that the sensor is significantly beneficial to practical applications, especially in structural health monitoring.

Development Of Nano-Strain-Resolution Fiber Optic Quasi-Static Strain Sensors For Geophysical Applications

Ultrahigh Resolution Fiber-Optic Quasi-Static Strain Sensors for Geophysical Research

Development of Nano-Strain-Resolution Fiber Optic Static Strain Sensor for Crustal Deformation Monitoring

Sensing the Earth Crustal Deformation with Nano-Strain Resolution Fiber-Optic Sensors.

Realization of Nano-Strain-resolution Fiber Optic Static Strain Sensor for Geo-Science Applications

Sensing the Earth Crustal Deformation with Nano-strain Resolution Fiber-optic Sensors

Ultrahigh resolution fiber optic strain sensing system for crustal deformation observation

Ultrahigh Resolution Fiber Bragg Grating Sensors for Quasi-Static Crustal Deformation Measurement

0.1-Nano-strain Resolution Fiber Optic Sensor for Quasi-Static Strain Measurement with 1 Ks/s Sampling Rate

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Crustal Deformation Measurement Using an Optical Fiber Strain Sensor

Realization of Nano Static Strain Sensing with Fiber Bragg Gratings Interrogated by Narrow Linewidth Tunable Lasers

An Ultra-High-resolution Large-Dynamic-range Fiber Optic Static Strain Sensor Using Pound-Drever-Hall Technique

Sensing the Earth Crustal Deformation with Fiber Optics

Sub-nano resolution fiber-optic static strain sensor using a sideband interrogation technique.

Field Demonstration of 10-Nano Static Strain Resolution Multiplexed FBG Sensor for Geophysical Applications

An Ultra-High-Resolution Fbg Static-Strain Sensor for Geophysics Applications

High Resolution Optical Fiber Sensor for Quasi-Static Strain Measurement by Strain-Temperature Discrimination

Optical fiber Fabry-Perot interferometer based embeddable strain sensor with 30 nano-strain resolution

Sub-Nano Resolution Static Strain Fiber Sensor Using A Novel Sideband Interrogation Technique

Sensing the Earth with Micro-Optics