Surface Oxygen Vacancies on Co3O4 Mediated Catalytic Formaldehyde Oxidation at Room Temperature

Zhong Wang,Wenzhong Wang,Ling Zhang,Dong Jiang

DOI: https://doi.org/10.1039/c5cy01709b

IF: 6.177

2016-01-01

Catalysis Science & Technology

Abstract:This study reveals the essential role played by surface oxygen vacancies in catalytic oxidation reactions, and complements the common viewpoint that Co3+ is the major activity species in Co3O4-based systems.

What problem does this paper attempt to address?

Surface oxygen vacancies on Co 3 O 4 mediated catalytic formaldehyde oxidation at room temperature

Zhong Wang,Wenzhong Wang,Ling Zhang,Dong Jiang

DOI: https://doi.org/10.1039/c5cy01709b

2016-01-01

Abstract:This study reveals the essential role played by surface oxygen vacancies in catalytic oxidation reactions, and complements the common viewpoint that Co 3+ is the major activity species in Co 3 O 4 -based systems.

chemistry, physical
Theoretical Studies of CO Oxidation with Lattice Oxygen on Co3O4 Surfaces

Yang-Gang Wang,Xiao-Feng Yang,Jun Li

DOI: https://doi.org/10.1016/s1872-2067(15)60969-x

2016-01-01

CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION)

Abstract:Low-temperature CO oxidation has attracted extensive interest in heterogeneous catalysis because of the potential applications in fuel cells, air cleaning, and automotive emission reduction. In the present study, theoretical investigations have been performed using density functional theory to elucidate the crystal plane effect and structure sensitivity of Co3O4 nano-catalysts toward catalyzing CO oxidation. It is shown that the surface Co–O ion pairs are the active site for CO oxidation on the Co3O4 surface. Because of stronger CO adsorption and easier removal of lattice oxygen ions, the Co3O4(011) surface is shown to be more reactive for CO oxidation than the Co3O4(001) surface, which is consistent with previous experimental results. By comparing the reaction pathways at different sites on each surface, we have further elucidated the nature of the crystal plane effect on Co3O4 surfaces and attributed the reactivity to the surface reducibility. Our results suggest that CO oxidation catalyzed by Co3O4 nanocrystals has a strong crystal plane effect and structure sensitivity. Lowering the vacancy formation energy of the oxide surface is key for high CO oxidation reactivity.
Surface Oxygen Vacancies Confined by Ferroelectric Polarization for Tunable CO Oxidation Kinetics

Zhaohui Ren,Luoyuan Ruan,Lichang Yin,Karthik Akkiraju,Livia Giordano,Zhongran Liu,Shi Li,Zixing Ye,Songda Li,Hangsheng Yang,Yong Wang,He Tian,Gang Liu,Yang Shao‐Horn,Gaorong Han

DOI: https://doi.org/10.1002/adma.202202072

IF: 29.4

2022-05-19

Advanced Materials

Abstract:Surface oxygen vacancies have been widely discussed to be crucial for tailoring the activity of various chemical reactions from CO, NO to water oxidation by using oxide‐supported catalysts. However, the real role and potential function of surface oxygen vacancies in the reaction remains unclear because of their very short life‐time. Here we report that surface oxygen vacancies can be well confined electrostatically for a polarization screening near the perimeter interface between Pt {111} nanocrystals and the negative polar surface (001) of ferroelectric PbTiO3. Strikingly, such a catalyst demonstrates a tunable catalytic CO oxidation kinetics from 200 °C to near room temperature by increasing O2 gas pressure, accompanied with the conversion curve from a hysteresis‐free loop to hysteresis one. The combination of reaction kinetics, electronic energy loss spectroscopy (EELS) analysis and density functional theory (DFT) calculations, indicates that the oxygen vacancies stabilized by the negative polar surface are the active sites for O2 adsorption as a rate‐determining step and then dissociated O moves to the surface of Pt nanocrystals for oxidizing adsorbed CO. Our results open a new pathway for tunable catalytic activity of CO oxidation. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Insights into High-Performance Monolith Catalysts of Co3O4 Nanowires Grown on Nickel Foam with Abundant Oxygen Vacancies for Formaldehyde Oxidation

Kaiwen Zha,Wenjie Sun,Zhen Huang,Hualong Xu,Wei Shen

DOI: https://doi.org/10.1021/acscatal.0c02944

IF: 12.9

2020-01-01

ACS Catalysis

Abstract:Monolith catalysts of cobalt oxides grown on metal substrates exhibited good catalytic performance in the oxidation of volatile organic compounds (VOCs) and oxygen vacancies play a key role in activating. However, there is rarely a report about the increase in oxygen vacancies using a facile method in monolith catalysts. Besides, the corresponding mechanism of the promotional effects of oxygen vacancies over the monolith catalysts still remains elusive. In this work, Co3O4 nanowires with abundant oxygen vacancies in situ grown on the Ni foam (r-Co3O4 NW@Ni foam) were synthesized and used as high-performance monolith catalysts for catalytic oxidation of formaldehyde. The r-Co3O4 NW@Ni foam catalysts showed outstanding catalytic activity and stability. The T10 (temperature when HCHO conversion achieved 10%) of r-Co3O4 NW@Ni foam catalysts (75 degrees C) was lower than that of Co3O4 NW@Ni foam catalysts (100 degrees C) and Co3O4 NP catalysts (132 degrees C). More importantly, the r-Co3O4 NW@Ni foam catalysts have more active oxygen species because of the promotional effects of surface oxygen vacancies. In situ diffuse reflectance infrared transform spectroscopy (in situ DRIFTs) results revealed that the formate species were reaction intermediates of HCHO catalytic oxidation reactions. However, the formate species on the surface of r-Co3O4 NW@Ni foam catalysts were more active thus could easily take part in catalytic reactions. Furthermore, combined with the calculation results, the abundant surface oxygen vacancies could weaken O-2 adsorption energy and make r-Co3O4 NW@Ni foam catalysts adsorb and store more active oxygen species, thus promoting more reaction intermediates to generate with a higher rate in redox cycles. The present investigations in this work may lead to an alternative development of high-performance monolith catalysts for VOC catalytic oxidation.
Solution combustion derived oxygen vacancy-rich Co 3 O 4 catalysts for catalytic formaldehyde oxidation at room temperature

Baolin Mu,Xianjuan Zhang,Yexin Zhang,Peng Lu,Jianying Hao,Jian Zhang

DOI: https://doi.org/10.1039/d2ra00783e

IF: 4.036

2022-01-01

RSC Advances

Abstract:The rich oxygen vacancies in porous Co 3 O 4 were generated in solution combustion, offering high room-temperature activity for formaldehyde oxidation.

chemistry, multidisciplinary
Oxygen Vacancy Promoted O-2 Activation over Perovskite Oxide for Low-Temperature CO Oxidation

Ji Yang,Siyu Hu,Yarong Fang,Son Hoang,Li,Weiwei Yang,Zhenfeng Liang,Jian Wu,Jinpeng Hu,Wen Xiao,Chuanqi Pan,Zhu Luo,Jun Ding,Lizhi Zhang,Yanbing Guo

DOI: https://doi.org/10.1021/acscatal.9b02408

IF: 12.9

2019-01-01

ACS Catalysis

Abstract:The insights on the primary active oxygen specie and its relation with oxygen vacancy is essential for the design of low-temperature oxidation catalysts. Herein, oxygen vacancy-rich La0.8Sr0.2CoO3 with an ordered macroporous structure was integrated on the commercial ceramic monolith in large scale without additional adhesives via a facile in situ solution assembly. The constructed macropores not only contributed to the oxygen vacancy generation in catalyst preparation but also facilitated favorable mass transport during catalytic process. Combined with theoretical investigations and EPR, O-2-TPD, H-2-TPR observations, we revealed that monatomic oxygen ions (O-) are the primary oxygen active specie for perovskite oxide. And molecular O-2 is more favorably adsorbed and activated on surface oxygen vacancies via a one electron transfer process to form monatomic oxygen ions (O-), thus boosting richness of active O- and the low-temperature oxidation of CO. Different with the preferential Eley-Rideal (E-R) mechanism on pristine LSCO surface, Langmuir-Hinshelwood (L-H) mechanism, in which O- reacts with adsorbed CO to finish the oxidation reaction, was more favorable on the oxygen vacancy rich surface. Our work here elucidates the primary active oxygen specie as well as its origin over perovskite oxides and paves a feasible pathway for rational design of high-performance catalysts in heterogeneous reactions.
Engineering oxygen vacancies via amorphization in conjunction with W-doping as an approach to boosting catalytic properties of Pt/Fe-W-O for formaldehyde oxidation

Muhua Chen,Yuping Qiu,Weizhen Wang,Xinyan Li,Jiajun Wang,He Wen,Zhiqing Yang,Ping Wang

DOI: https://doi.org/10.1016/j.jhazmat.2021.126224

IF: 13.6

2021-08-01

Journal of Hazardous Materials

Abstract:Engineering functional defects in support materials has gained ever-increasing attention as a novel approach to boosting the catalytic performance of oxide-supported catalysts. Herein, we demonstrate the feasibility of engineering oxygen vacancy in iron oxide through amorphization in conjunction with foreign cation doping and elucidate the important role of support functionality in the catalytic oxidation of formaldehyde (HCHO). A supported Pt catalyst on Fe-W-O amorphous nanosheets (denoted as Pt/a-Fe-W-O) was synthesized using a one-step solvothermal method. This simple method allowed us to simultaneously create abundant oxygen vacancies in the substrate and to ensure uniform dispersion of tiny Pt nanoparticles with an average diameter of 1.4 nm on the high-surface-area substrate. This renders an increased possibility of Pt/O-vacancy coexistence in close proximity, which synergistically boosts the formation of active oxygen and surface hydroxyl species. Consequently, the Pt/a-Fe-W-O catalyst with an optimal W/Fe molar ratio of 0.08:1 and a 1.51 wt% Pt loading exhibited a high specific reaction rate of 68.3 μmol gPt-1 s-1 and excellent stability during 24 h continuous test, outperforming most existing HCHO oxidation catalysts. Our study highlights the importance of functional oxygen defects in construction of synergistic active sites for promoting the reactions requiring multiple active species.

environmental sciences,engineering, environmental
A DFT+U Study of CO Oxidation at CeO2(110) and (111) Surfaces with Oxygen Vacancies

Ya-Ling Song,Li-Li Yin,Jie Zhang,P. Hu,Xue-Qing Gong,Guanzhong Lu

DOI: https://doi.org/10.1016/j.susc.2013.09.001

IF: 3.3

2012-01-01

Physical Chemistry Chemical Physics

Abstract:Density functional theory calculations corrected by on-site Coulomb interaction have been carried out to track down the lattice oxygen reactivity of CeO(2)(111) and (110) surfaces in direct oxidation of a single CO. The possible elementary steps in CO adsorption and subsequent reactions with lattice oxygen were systematically studied. From calculated energetics, we determined that the lattice oxygen of the (110) surface is more reactive than that of the (111) surface. By calculating the reaction pathways leading to different final products, we found that the formation of carbonate species is competitive to CO(2) formation and desorption, and such an effect could be more significant at CeO(2)(110) compared to CeO(2)(111). More importantly, it has also been found that electron localization at the characteristic 4f orbital of Ce, directly determined by subtle structural relaxation, can give rise to a unique scenario of the overall reaction coordinates. These results may bring us one step ahead toward the comprehensive understanding of catalytic performance of CeO(2)-based materials.
Origin of Extraordinarily High Catalytic Activity of Co3O4 and Its Morphological Chemistry for CO Oxidation at Low Temperature

Hai-Feng Wang,Richard Kavanagh,Yang-Long Guo,Yun Guo,Guanzhong Lu,P. Hu

DOI: https://doi.org/10.1016/j.jcat.2012.09.005

IF: 7.3

2012-01-01

Journal of Catalysis

Abstract:Understanding and then designing efficient catalysts for CO oxidation at low temperature is one of the hottest topics in heterogeneous catalysis. Among the existing catalysts, Co3O4 is one of the most interesting systems: Morphology-controlled Co3O4 exhibits exceedingly high activity. In this study, by virtue of extensive density functional theory (DFT) calculations, the favored reaction mechanism in the system is identified. Through careful analyses on the energetics of elementary reactions on Co3O4(110)-A, Co3O4(110)-B, Co3O4(111) and Co3O4(100), which are the commonly exposed surfaces of Co3O4, we find the following regarding the relation between the activity and structure: (i) Co3+ is the active site rather than Co2+; and (ii) the three-coordinated surface oxygen bonded with three Co3+ may be slightly more reactive than the other two kinds of lattice oxygen, that is, the two-coordinated O bonded with one Co2+ and one Co3+ and the three-coordinated O bonded with one Co2+ and two Co3+. Following the results from Co3O4, we also extend the investigation to MnO2(110), Fe3O4(110), CuO(110) and CuO(111), which are the common metal oxide surfaces, aiming to understand the oxides in general. Three properties, such as the CO adsorption strength, the barrier of CO reacting with lattice O and the redox capacity, are identified to be the determining factors that can significantly affect the activity of oxides. Among these oxides, Co3O4 is found to be the most active one, stratifying all the three requirements. A new scheme to decompose barriers is introduced to understand the activity difference between lattice O3c and O2c on (110)-B surface. By utilizing the scheme, we demonstrate that the origin of activity variance lies in the geometric structures.
Engineering Active Surface Oxygen Sites of Cubic Perovskite Cobalt Oxides Toward Catalytic Oxidation Reactions

Xinbo Li,Xiyang Wang,Junfang Ding,Mingwei Ma,Shuhua Yuan,Qilei Yang,Zhen Wang,Yue Peng,Chengjun Sun,Hua Zhou,Haozhe Liu,Yimin A. Wu,Keke Huang,Liping Li,Guangshe Li,Shouhua Feng

DOI: https://doi.org/10.1021/acscatal.3c00139

IF: 12.9

2023-01-01

ACS Catalysis

Abstract:Unraveling the role of surface oxygen sites in transition metal oxides during catalytic reactions has always been the focus of environmental and energy chemistry research. Herein, active surface oxygen sites of cubic perovskite cobalt oxide were engineered to comprehend their crucial role and catalytic mechanism at the molecular level. By removing those inert Sr/ La-O termination layers, active oxygen sites were exposed on the Co terminated surface of Sr0.6La0.4CoO3-delta that furnished the dominant catalytic process of CO oxidation via the Mars-van Krevelen (MvK) mechanism. The fabrication of five-coordinate cobalt ions and the enhanced covalency of Co-O bonds not only optimize the surface electronic structure of Co 3d-O 2p, but also supply active surface oxygen sites, which effectively oxidizes CO to CO2 with a significantly improved oxidation performance and stability as evidenced by soft/hard XAS, XPS, and O2-TPD. Furthermore, online isotopic 18O2 mass spectrometry, in situ DRIFTS, and theoretical simulation demonstrate that the activity of surface oxygen sites enhances the kinetics of the MvK reaction, while unsaturated coordination sites from five-coordinate cobalt ions primarily contribute to the activated oxygen molecules and the stable catalytic cycle. The results reported here provide a deep insight into the comprehension of the relationships among active oxygen sites, surface electronic structure, and the reaction mechanism of transition metal oxides necessary for catalytic oxidation reactions.
Critical Roles of Surface Oxygen Vacancy in Heterogeneous Catalysis over Ceria-based Materials: A Selected Review

Ching-Hsiu Chung,Fang-Yi Tu,Te-An Chiu,Tung-Ta Wu,Wen-Yueh Yu

DOI: https://doi.org/10.1246/cl.200845

2021-05-05

Chemistry Letters

Abstract:Surface oxygen vacancy, dynamically created and annihilated under the reaction conditions, may serve as a unique form of active site for heterogeneous catalysis. In this study, the mechanisms of selected reactions (i.e., CO oxidation, water-gas shift, CO2 hydrogenation, alcohol carbonation, and selective catalytic reduction of NO with NH3) proposed by in-situ spectroscopy characterizations were reviewed to elucidate the critical roles of surface oxygen vacancy in heterogeneous catalysis over ceria-based materials. It is demonstrated that the surface oxygen vacancy may interact with reactants and intermediates through enhanced adsorption and activation to promote the overall catalysis. Operando spectroscopy studies that enable in-situ spectroscopy characterizations of surface oxygen vacancy and reaction intermediates coupled with simultaneous kinetic measurements are highly recommended to further advance the fundamental understanding of the ceria catalysis.Surface oxygen vacancy, dynamically created and annihilated under the reaction conditions, may serve as a unique form of active site for heterogeneous catalysis. In this study, the mechanisms of selected reactions (i.e., CO oxidation, water-gas shift, CO2 hydrogenation, alcohol carbonation, and selective catalytic reduction of NO with NH3) proposed by in-situ spectroscopy characterizations were reviewed to elucidate the critical roles of surface oxygen vacancy in heterogeneous catalysis over ceria-based materials. It is demonstrated that the surface oxygen vacancy may interact with reactants and intermediates through enhanced adsorption and activation to promote the overall catalysis. Operando spectroscopy studies that enable in-situ spectroscopy characterizations of surface oxygen vacancy and reaction intermediates coupled with simultaneous kinetic measurements are highly recommended to further advance the fundamental understanding of the ceria catalysis.

chemistry, multidisciplinary
Oxygen Vacancy Activates the Second-Nearest-Neighbor Lattice Oxygen for Oxidation Reaction

Yijing Liu,Le Lin,Rentao Mu,Qiang Fu

DOI: https://doi.org/10.1021/acs.jpclett.4c02133

2024-09-06

Abstract:Oxygen vacancies on the oxide surface are regarded to play critical roles in catalytic oxidation reactions because they can alter the electronic and geometric properties of oxide catalysts. However, the effects of the oxygen vacancy on the CO oxidation activity of the surrounding lattice oxygen have remained elusive. In this work, using high-pressure scanning tunneling microscopy we identify that oxygen vacancy can activate surface lattice oxygen on the Mn3O4 thin layer. It is found that CO reacts with the lattice oxygen located at the second-nearest-neighbor position to the original oxygen vacancies more easily than that at the closest position and at the defect-free surface. This can be ascribed to the lower formation energy of the oxygen vacancies. Our study provides atomic-level insights into the promoting effect of oxygen vacancies on catalytic oxidation reactions.
Oxygen Vacancy-Controlled Reactivity of Hydroxyls on an FeO(111) Monolayer Film

Lingshun Xu,Wenhua Zhang,Yulin Zhang,Zongfang Wu,Bohao Chen,Zhiquan Jiang,Yunsheng Ma,Jinlong Yang,Weixin Huang

DOI: https://doi.org/10.1021/jp200423j

2011-01-01

Abstract:The reactivity of surface hydroxyls on FeO (111) monolayer films on Pt(111) with different oxygen vacancy concentrations has been investigated by means of X-ray photoelectron spectroscopy, thermal desorption spectroscopy, low energy electron diffraction, and density functional theory calculations. Surface hydroxyls on the FeO(111) monolayer films undergo two types of surface reactions: one type is surface reactions to form H2O and create oxygen vacancies; the other is surface reactions to form H-2. Surface reactions to form H2O and create oxygen vacancies are preferred for surface hydroxyls on the stoichiometric FeO (111) monolayer film but get suppressed with the increasing of the oxygen vacancy concentration on the FeO(111) rnonolayer film. On the FeO0.67(111) monolayer film, surface hydroxyls prefer surface reactions to form H-2. The accompanying DFT calculation results demonstrate that the thermodynamically favorable reaction between two OH(a) switches from the surface reaction to form H2O and oxygen vacancies on the stoichiometric FeO(111) monolayer film to the surface reaction to form H-2 on the FeO0.75(111) monolayer film. These results reveal a novel concept of oxygen vacancy-controlled reactivity of surface hydroxyls in which the thermodynamically favorable reactions switch from reactions to form H2O and oxygen vacancies on the stoichiometric FeO(111) monolayer film to those to form H-2 on the partially reduced FeO0.75(111) monolayer film. The interplay between oxygen vacancies and surface hydroxyls that both exert great influence on the physical chemistry and reactivity of oxide surface will greatly deepen the fundamental understanding of the relevant heterogeneous catalytic reaction systems involving transitional metal oxides.
Exceptional formaldehyde oxidation at room temperature on Co single-atom functionalized TiO 2 nanowires via highly effective O 2 activation

Lijuan Liu,Guohua Jing,Cibin Xu,Xiaowei Zhang,Xuehong Zhang,Lingyun Guo,Zhiwei Huang,Xiaomin Wu,Huawang Zhao,Chung-Shin Yuan,Huazhen Shen,Wenjie Xia

DOI: https://doi.org/10.1016/j.apcatb.2023.123634

IF: 24.319

2023-12-30

Applied Catalysis B Environmental

Abstract:O 2 activation is vital for catalyzing the oxidation of formaldehyde (HCHO). Despite the high O 2 activation capabilities demonstrated by noble metal catalysts, their practical application is impeded by their exorbitant cost. Herein, Co single atoms were successfully incorporated into titanium dioxide nanowires (TiO 2 -NWs). Furthermore, the key step in the HCHO catalytic oxidation process was elucidated through in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) and density functional theory (DFT) calculations. Finally, the intricate O 2 activation mechanism was explored, revealing the catalyst's exceptional performance in ambient HCHO oxidation. Notably, it outperformed commercial TiO 2 (TiO 2 -P25) by 13.3 times and Co-supported TiO 2 -P25 by 1.9 times. Co single atoms facilitated the conversion of O 2 into superoxide (O 2 - ), significantly reducing the reaction barrier of dioxymethylene to formate. This superior O 2 activation was attributed to the active nature and unsaturated electronic configuration of Co single atoms. This study provides a novel, cost-effective strategy for creating HCHO elimination catalysts with accessible nonnoble transition metals.

chemistry, physical,engineering, chemical, environmental
Reactivity of surface oxygen vacancy sites and frustrated Lewis acid-base pairs of In2O3 catalyst in CO2 hydrogenation

Zhangqian Wei,Shenggang Li,Peng Gao

DOI: https://doi.org/10.1039/d4cp00895b

IF: 3.3

2024-05-24

Physical Chemistry Chemical Physics

Abstract:Effects of oxygen vacancy (VO) formation energy and surface frustrated Lewis acid-base pairs (SFLPs) on CO2 hydrogenation activity of In2O3 catalyst were studied by density functional theory calculations. VO formation energy of 2.8-3.3 eV was found to favor HCOO formation, whereas the presence of SFLPs is conducive to CO formation.

chemistry, physical,physics, atomic, molecular & chemical
Insight into the effect of oxygen vacancies and OH groups on anatase TiO2 for CO oxidation: A combined FT-IR and density functional theory study

Bingxian chu,Xuemei Ou,Longqing Wei,Hao Liu,Kean chen,Qiuju Qin,Lingkai Meng,Minguang Fan,Bin Li,Lihui Dong

DOI: https://doi.org/10.1016/j.mcat.2021.111755

IF: 4.6

2021-07-01

Molecular Catalysis

Abstract:Anatase TiO2 plays an important role in catalytic reaction. The present work focused on surface structural and electric structural properties of the anatase TiO2 doped with some 3d transition metals (Mn, Fe and Co). Taking the CO oxidation as a probe reaction, attempts to explain the influence of oxygen vacancies and surface OH groups on the reaction mechanism by using FT-IR characterization and DFT calculation. It is found that doping can activate the surface lattice oxygen by introducing spin polarization, thereby increasing the oxygen vacancy to adsorb more chemisorbed oxygen. It is also found that OH groups increase the catalytic performance by forming bicarbonate which is eventually consumed. At low temperature, the CO oxidation reaction by surface reactive oxygen species and hydroxyl groups together. At high temperature, CO molecules are oxidized by surface reactive oxygen species with CO2 desorption step as the controlling step. Finally, the reaction mechanism was summarized as a Eley-Rideal mechanism.

chemistry, physical
Identifying Active Sites of Co3O4 Catalysts towards C2H2 Oxidation by Combined Computational and Experimental Methods

Jianlin Deng,Meng Gao,Meng Wang,Yazhao Li,Weiyu Song,Lu Wang,Huiling Zheng,Jian Liu

DOI: https://doi.org/10.1039/d4en00358f

2024-07-20

Environmental Science Nano

Abstract:Herein, combined computational and experimental studies are carried out to unravel the role of active center on C2H2 oxidation over Co3O4 catalysts. Density functional theory (DFT) studies indicate that Co2+ ions on Co3O4 (110)-A exhibit stronger reducibility than Co3+, and the oxygen species activated by Co2+ have better catalytic performance. On Co3O4 (110)-B surface, Co2+ ions represent the presence of oxygen vacancies. O2 can be adsorbed on oxygen vacancies and forms active O2- species, which can oxidize C2H2 to CO2 and H2O. Co3O4 catalysts with different Co2+ contents are prepared to experimentally verify the calculation results. The activity varies in the order of Co3O4-Sheets-reduction > Co3O4-Sheet > Co3O4-Sticks-reduction > Co3O4-Stick, which is in accordance with the trend of Co2+ contents. Further, microkinetic studies prove that the key of C2H2 oxidation is C-C dissociation. Decreasing C-C cleavage barrier will significantly enhance the overall reaction rates. Both of the computational and experimental results show that the presence of Co2+ on the surface of Co3O4 catalyst is the main contributing factor for the activity of the C2H2 oxidation. Minimal research has been reported on C2H2 oxidation. This may provide a guideline for eliminating the other volatile organic compounds over Co3O4 catalysts.

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
The role of oxygen vacancies on Pt/NaInO2 catalyst in improving formaldehyde oxidation at ambient condition

Fang Liu,Xiaopan Liu,Jie Shen,Addie Bahi,Shiying Zhang,Long Wan,Frank Ko

DOI: https://doi.org/10.1016/j.cej.2020.125131

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:In order to gain an understanding of the role of oxygen vacancy in enhancing gaseous formaldehyde oxidation, mesoporous NaInO2 compounds were synthesized with different amount of oxygen vacancies while maintaining similar BET surface area. The NaInO2 compounds were designed as the support for platinum (Pt) nanoparticles loaded catalytic oxidation, exhibiting the best performance with a formaldehyde degradation ratio of 96.11%. Interfacial lattice mismatch was considered as the cause of oxygen vacancies and simulated by density functional theory (DFT). Special bridged bidentate species were observed in Pt/NaInO2 with oxygen vacancies during HCHO oxidation using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Based on our observations we propose, for the first time, that superoxide (O-2(center dot-)) is the effective species that oxidizes formaldehyde, while oxygen vacancies provide pathways to transport O-2(center dot-) from Pt nanoparticles to support surface thus offering more active sites for the reaction to take place.
Activating Surface Lattice Oxygen of a Cu/Zn1-xCuxO Catalyst through Interface Interactions for CO Oxidation

Minli Zeng,Xiyang Wang,Qilei Yang,Xuefeng Chu,Zuolong Chen,Zhen Li,Carl Redshaw,Chao Wang,Yue Peng,Nannan Wang,Yanqiu Zhu,Yimin A. Wu

DOI: https://doi.org/10.1021/acsami.1c24321

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:Surface lattice oxygen in metal oxides is a common participant in many chemical reactions. Given this, the structural design of catalysts to activate lattice oxygen and moreover investigations into the effect of lattice oxygen on reaction pathways are hot topics. With this in mind, herein we prepare CuO-Zn1-xCuxO (ZCO) nanofibers akin to the Trojan horse legend and via an in situ reduction obtain activated Cu/Zn1-xCuxO (Cu/ZCO) nanofibers. X-ray absorption spectroscopy and X-ray photoelectron spectroscopy reveal that surface lattice oxygen of Cu/ZCO is effectively activated from inert O2- to reactive O2-x. This activation stems from the enhanced covalence of metal-oxygen bonds and the electron transfer between Cu and the support. Online mass spectrometry reveals that Cu/ZCO with activated lattice oxygen exhibits a higher Mars-van Krevelen reaction efficiency during the CO oxidation process. This study offers a new avenue to engineer interface interactions, given, as highlighted here, the importance of surface lattice oxygen in oxide supports during the catalytic process.

Surface Oxygen Vacancies on Co3O4 Mediated Catalytic Formaldehyde Oxidation at Room Temperature

Surface oxygen vacancies on Co 3 O 4 mediated catalytic formaldehyde oxidation at room temperature

Theoretical Studies of CO Oxidation with Lattice Oxygen on Co3O4 Surfaces

Surface Oxygen Vacancies Confined by Ferroelectric Polarization for Tunable CO Oxidation Kinetics

Insights into High-Performance Monolith Catalysts of Co3O4 Nanowires Grown on Nickel Foam with Abundant Oxygen Vacancies for Formaldehyde Oxidation

Solution combustion derived oxygen vacancy-rich Co 3 O 4 catalysts for catalytic formaldehyde oxidation at room temperature

Oxygen Vacancy Promoted O-2 Activation over Perovskite Oxide for Low-Temperature CO Oxidation

Engineering oxygen vacancies via amorphization in conjunction with W-doping as an approach to boosting catalytic properties of Pt/Fe-W-O for formaldehyde oxidation

A DFT+U Study of CO Oxidation at CeO2(110) and (111) Surfaces with Oxygen Vacancies

Origin of Extraordinarily High Catalytic Activity of Co3O4 and Its Morphological Chemistry for CO Oxidation at Low Temperature

Engineering Active Surface Oxygen Sites of Cubic Perovskite Cobalt Oxides Toward Catalytic Oxidation Reactions

Critical Roles of Surface Oxygen Vacancy in Heterogeneous Catalysis over Ceria-based Materials: A Selected Review

Oxygen Vacancy Activates the Second-Nearest-Neighbor Lattice Oxygen for Oxidation Reaction

Oxygen Vacancy-Controlled Reactivity of Hydroxyls on an FeO(111) Monolayer Film

Exceptional formaldehyde oxidation at room temperature on Co single-atom functionalized TiO 2 nanowires via highly effective O 2 activation

Reactivity of surface oxygen vacancy sites and frustrated Lewis acid-base pairs of In2O3 catalyst in CO2 hydrogenation

Insight into the effect of oxygen vacancies and OH groups on anatase TiO2 for CO oxidation: A combined FT-IR and density functional theory study

Identifying Active Sites of Co3O4 Catalysts towards C2H2 Oxidation by Combined Computational and Experimental Methods

The role of oxygen vacancies on Pt/NaInO<sub>2</sub> catalyst in improving formaldehyde oxidation at ambient condition

Activating Surface Lattice Oxygen of a Cu/Zn<sub>1-<i>x</i></sub>Cu<i><sub>x</sub></i>O Catalyst through Interface Interactions for CO Oxidation