Abstract:During engine operation, the crankshaft journals are prone to wear, resulting in a decrease in surface matching accuracy and abnormal vibration and noise. Therefore, it is important to strengthen the surface and improve the wear resistance. Laser cladding, which involves multiple disciplines, such as automation control, optics, fluid mechanics, heat transfer, etc., is an effective method. In this paper, based on the finite element method, a numerical model of the laser cladding for the crankshaft journal was established. A disk laser was used to laser clad Fe45 powder on the ASTM1045 substrate. The multi-physics field coupling evolution mechanism of the laser cladding process was quantitatively revealed. The cladding temperature, liquid metal flow rate, and stress are positively correlated with the laser power. Combined with the cellular automata method, the microstructure evolution model during the solidification was established, and the morphology and size distribution of the grains in the cladding layer was obtained. In the middle area of the cladding layer, the grains are mostly columnar and equiaxed crystals. At the same time, the change of material physical parameters with temperature was taken into account in the model, which makes the numerical simulation results more accurate. The numerical simulation results were compared with the experimental results through the microscopic characterization experiment, and the accuracy of the numerical model was verified. Finally, through a friction-wear test, the wear resistance between the cladding layer and the substrate is compared. The average wear amount of the substrate is 1.86mm3 and the average wear amount of the cladding layer is 0.64mm3. The experiment shows that the wear resistance of the cladding layer is higher than that of the substrate, and the wear rate is reduced by 65.59%.

The Technology Study of Camshaft Treated by Laser Bionic Melting Process in Aqueous Media Cooling

Study on Friction and Wear Performance of Bionic Coupling Surface Moving Pair of 45 Steel

Study on the Compressive Stress Retention in Quenched Cam of 100cr6 Steel Based on Coupled Thermomechanical and Metallurgical Modeling

Research on Laser Melting-Alloying Combined Strengthening of the Camshaft of Air-Cooled Diesel Engine

Multi-physics field coupling and microstructure numerical simulation of laser cladding for engine crankshaft based on CA-FE method and experimental study

Effect of Composition on the Mechanical Properties and Wear Resistance of Low and Medium Carbon Steels with a Biomimetic Non-Smooth Surface Processed by Laser Remelting

Bionic Laser Surface Remelting for the Wear Performance after Thermal Fatigue of B2 Die Steel Based on Surface Stress Simulation

Optimization of Bionic Texture Parameters by Box–Behnken Method and Study on Tribological Performance of 42CrMo Self-Lubricating Composites in Solid–Liquid Composite Lubrication System

Lubricant-transport Behavior and Mechanical Performance of Assembled Multi-Biomimetic Structure Designed for Green Interrupted Turning

Study on tribological properties of boronized and textured composite surface and its application on camshaft connecting-rod type hydraulic motor

Laser Surface Melting Process for Camshaft Made of Ductile Iron

Influence of varying distribution distance and angle on fatigue wear resistance of 40Cr alloy steel with laser bionic texture

Study on the Mechanical Properties of Bionic Coupling Layered B4C/5083Al Composite Materials

Effect of hardness gradient of laser bionic coupling unit on wear resistance of 6082 aluminum alloy

Optimization of Textured Parameters to Improve the Tribological Behavior of TC4-Based Bionic Coating Using RSM

Effect of Laser Remelting on Tribological Properties of Babbitt Alloy

Effect of hollow-tube structure on the tribological performance of biomimetic water-lubricated bearing material

Researches of Cast Iron Piston Rings Strengthened by Laser

Numerical simulation on hydrodynamic lubrication performance of bionic multi-scale composite textures inspired by surface patterns of Subcrenata and Clam shells

Investigation of Micro-wear and Micro-friction properties for bionic non-smooth concave components

Surface texture and heat treatment on the friction performance of cam tappet experimental and fluid-solid coupling numerical study