Abstract:The Poly-Si/SiO x stack passivation structure incorporate doped polycrystalline silicon (Poly-Si) and tunneling silicon oxide (SiO x ) thin films allows for majority-carrier transport as well as block minority carriers and suppress recombination, and thus enable very high efficiency. Up to now the Poly-Si/SiO x stack passivation have been a widespread research topic for photovoltaic researchers, but most of the works are only focused on n-type doped structures and the rear side polished surface of the solar cells. In order to apply the Poly-Si/SiO x stack structure to the front textured surface and p + emitter region to obtain high-efficiency double-sided passivated contact solar cells and Si-based tandem cells in the future. In this work, passivation properties of Poly-Si/SiO x stack capped with SiN x :H layer are discussed based on different crystalline silicon surface morphologies, dopant types, doping profiles and thickness of Poly-Si layer. With proper doping process control, an excellent implied open-circuit voltage ( iVoc ) of 706 mV with a saturation current density ( J 0 ) value of 12 f A/cm 2 has been obtained for the boron-doped Poly-Si/SiO x stack capped with SiN x :H based on the textured surface, and an iVoc of 736 mV with a J 0 value of 2 f A/cm 2 has been acquired for the phosphorus-doped Poly-Si/SiO x stack capped with SiN x :H based on the acid polished surface. The results show that the polished surface and thinner Poly-Si layer are helpful for passivation. For the doped Poly-Si/SiO x stack structure, the doping source will penetrate the tunneling SiO x layer into the silicon bulk to form a certain penetration depth on the surface of the silicon substrate. In order to acquire the high iVoc (low J 0 ) value, a penetration depth of around 160 nm is needed to the phosphorus-doped Poly-Si/SiO x stack, while a penetration depth of less than 25 nm is required for boron-doped Poly-Si/SiO x stack. In addition, there is a linear relationship between the R sheet value and the reciprocal value of the Poly-Si (n + ) layer thickness.

Oxygen passivation of silicon nanocrystals: Influences on trap states, electron mobility, and hybrid solar cell performance

Bonding of oxygen at the oxide/nanocrystal interface of oxidized silicon nanocrystals: An ab initio study

Impact of interstitial oxygen trapped in silicon during plasma growth of silicon oxy-nitride films for silicon solar cell passivation

Density Functional Theory Study on the Oxidation of Hydrosilylated Silicon Nanocrystals

Enhancement of Electrical Properties of Nanostructured Polysilicon Layers Through Hydrogen Passivation

Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells

Sulfur-enhanced surface passivation for hole-selective contacts in crystalline silicon solar cells

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

Enhanced Si Passivation and PERC Solar Cell Efficiency by Atomic Layer Deposited Aluminum Oxide with Two-step Post Annealing

Effective Hydrogenation Strategies to Boost Efficiency over 20% for Crystalline Silicon Solar Cell with Al2O3/Cu2O Passivating Contact

Passivation properties of tunnel oxide layer in passivated contact silicon solar cells

Improved V 2 O X Passivating Contact for p ‐Type Crystalline Silicon Solar Cells by Oxygen Vacancy Modulation with a SiO X Tunnel Layer

The Passivation Characteristics of Poly-Si/SiOx Stack for High-Efficiency Silicon Solar Cells

Enhanced Device Performance of Si Nanowires/si Nanocrystals Heterojunction Solar Cells with Ultrathin Al2O3 Passivation

Synthesis and Characterization of Fe, Cu, and Cr Doped ZnO Nanocrystallite Films and the Effects on Passivation of Silicon Surface

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Solution-processed molybdenum oxide films by low-temperature annealing for improved silicon surface passivation

Significant advancements in passivating crystalline silicon surfaces achieved through the implementation of metal-doped zinc oxide layers

Effective Passivation on Si Nanocrystal Surface by Peroxide

Ultrathin Self-Assembled Monolayer for Effective Silicon Solar Cell Passivation

Unraveling the Passivation Mechanisms of C-Si/Siox/Poly-Si Contacts