Abstract:Micro-machined electrostatic actuators (MEA) like parallel plate actuators (PPAs) and comb drive actuators (GCAs) are commonly used in many applications, including gyroscopes, resonators and RF switches. The detection of an actuators' mechanical motion is desired when they are combined with feedback control techniques, especially when the application requires high performance or is affected by disturbances. The motion can be detected by a variety of sensing techniques, including capacitive, piezoresistive and optical. Electrostatic parallel plate actuators can be modeled as a type of variable capacitor, which depends on the gap between a fixed electrode and a movable electrode. Thus, the displacement of the actuator can be obtained by measuring the capacitance. However, this practical method often requires high frequency excitation signal sources or additional sensing structures. The excitation power source not only affects the performance in the actuator's steady state, but it may also generate harmonics that distort the measurement signals due to the nonlinear characteristics of the actuator. In addition, the information about velocity may not be obtained without specific sensing structures. The additional structures occupy more space in each die, which could increase the cost and size, or decrease the performance. In this study, an estimator with a series resistor configuration is proposed. The estimator can estimate the displacement and velocity by measuring the voltage of the power supply and the voltage across the actuator itself. To evaluate the feasibility, a nonlinear observability analysis is applied. The analysis shows the observability index among different system states. A simulation study verified the proposed theories.

Nonlinear Feedback Control to Enhance Stable Performance of Micromachined Electrostatic Parallel Plate Actuators

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Sliding Mode Based Controller for Magnetostrictive Actuator

Nonlinear adaptive position tracking of an electro-hydraulic actuator

Nonlinear Motion Control of a Hydraulic Press Based on an Extended Disturbance Observer

Beyond Snap-In: A Hybrid Nonlinear Control Approach for Actuators Possessing a Square-Law Characteristic

Nonlinear feedback control of dual-stage actuator system

Feedback Posicast Control for Micromachined Electrostatic Actuators

Nonlinear Control of Hybrid Electrostrictive/Piezoelectric Polymeric Structures: Theory and Experiment

Parameter Identification and Model-Based Nonlinear Robust Control of Fluidic Soft Bending Actuators

Study of Planar Motor Motion Control Based on Nonlinear Feedback

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Motion Control of Electro-Hydrostatic Actuators with Modeling and Compensation of Nonlinear Bulk Modulus

Nonlinear Observability Analysis of Micro-machined Electrostatic Actuators Using Self-Sensing

Learning-based feedforward augmentation for steady state rejection of residual dynamics on a nanometer-accurate planar actuator system

Data-driven fractional order feedback and model-less feedforward control of a XY reluctance-actuated micropositioning stage

Nanopositioning control of an electrostatic MEMS actuator: adaptive terminal sliding mode control approach

A Customized Nonlinear Micro-Flexure for Extending the Stable Travel Range of MEMS Electrostatic Actuator

Control of an Electrostrictive Actuator Using Newton's Method

Nonlinear Iterative Learning Control Applied to an Aerostatic X–Y Planar Motion Stage

Nonlinear robust dual-loop control for electro-hydraulic load simulator