Abstract:Lithium iron silicate (Li2FeSiO4) has high theoretical capacity of 332 mAh∙g−1 upon full extraction of two lithium ions, which is accompanied by high delithiation potential and large volume change. Sulfur modification could be an effective approach for stabilizing Li2FeSiO4 cathodes. A series of carbon-coated Li2FeSiO4 samples were prepared through a hydrothermal and solid-state reaction route at a fixed sucrose content (14 wt% carbon) with varying amounts of sublimed sulfur at 5, 10, 15, 20 and 25 at%. The crystal structures, chemical compositions, microstructures and electrochemical performances of the differently sulfur-modified Li2FeSiO4/C were systematically investigated. The sulfur-carbon co-modifications and possible existing chemical states of sulfur are discussed in terms of the surface and near-bulk modifications. It was found that all the samples exhibited a monoclinic P21 structural Li2FeSiO4, while the sulfur contents over 10 at% formed impure phases such as iron sulfides (Fe1-xS) and lithium metasilicate (Li2SiO3). Furthermore, three types of sulfur states could be found when sulfur and carbon were added simultaneously into Li2FeSiO4. The surfaces were predominated by S–C and S–O–C, indicating the sulfur-carbon co-modification, which would reduce the resistance at the solid/electrode interface (SEI) but increase the charge transfer resistance. Near the bulk, the enhanced interactions between sulfur and iron S–Fe(−S) or sulfur and silicon S–Si(−O) may lead to the formation of possible impurities or oxygen substitution by sulfur. The former is detrimental as the effective sulfur amount is reduced, while the latter is beneficial to improve specific capacity and cycle stability. The overall performance of sulfur-carbon co-modified sample is influenced complicatedly by the sulfur content. The best initial discharge capacity of 152.3 mAh∙g−1 was obtained with 5 at% sulfur modification, while the best overall performance, showing a typical warm-up response and good cycle stability, was observed with 15 at% sulfur modification.

Formation, structure and electrochemical performance of nano-sized Li2FeSiO4/C synthesized with the co-incorporation of citric acid and glucose followed by a two-step annealing

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Nanostructure and Its Effect on Electrochemical Properties of Polyanionic Li2CoSiO4 for Lithium Ion Batteries

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

High Performance Amorphous-Si@siox/c Composite Anode Materials for Li-ion Batteries Derived from Ball-Milling and in Situ Carbonization

Nanostructure and its effect on electrochemical properties of polyanionic Li 2 CoSiO 4 for lithium ion batteries

Enhanced Cycle Stability of Micro-Sized Si/C Anode Material with Low Carbon Content Fabricated Via Spray Drying and in Situ Carbonization

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Double Role of Silicon in Improving the Rate Performance of LiFePO4 Cathode Materials

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Preparation and characterization of nano-Li_4Ti_5O_(12)/C composite materials

The impact of carbon material microstructure on li-ion storage behaviors of Si in Si/C anodes

Fe3O4 Contribution to Core–Shell Structured Si@C Nanospheres As High-Performance Anodes for Lithium-Ion Batteries

Mechanistic study in sulfur-carbon co-modification on Li2FeSiO4 for lithium-ion batteries

Embedding Atomically Dispersed Iron Sites in Nitrogen‐Doped Carbon Frameworks‐Wrapped Silicon Suboxide for Superior Lithium Storage

Synthesis of carbon-coated LiMn0.8Fe0.2PO4 materials via an aqueous rheological phase-assisted solid-state method

Mesoporous Li2 FeSiO4/C as Cathode Material for Lithium Ion Battery

Self-Assembly Of A Cofe2o4/Graphene Sandwich By A Controllable And General Route: Towards A High-Performance Anode For Li-Ion Batteries

Synthesis and characterization of LiFePO4/(Ag + C) composite cathodes with nano-carbon webs

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles