Abstract:Purpose The performance of detectors is key for a PET scanner to achieve high spatial resolution and high sensitivity. This work aims to develop flood histogram generating algorithms to reduce the edge effect and improve the crystal identification of a PET detector consisting of two optically coupled pixelated scintillator detectors. Methods The PET detector consists of two optically coupled detectors, each consisting of a 23×23 LYSO crystal array with a crystal size of 1.0×1.0×20 mm3 read out by an 8×8 SiPM array with a pixel size of 3.0×3.0 mm2. The SiPM array is read out with a resistor network circuit to obtain four position encoding energy signals. A novel center of gravity (COG) positioning algorithm using six signals from the two detectors was proposed and compared to the traditional COG algorithms using either four or eight signals from the detectors. The raised‐to‐the‐power (RTP) method was applied to the three COG algorithms for the PET detector. Different powers of the RTP from 1.0 to 2.5 were evaluated. Results The proposed COG algorithm significantly improves the crystal identification at the junction of the two detectors as compared to the COG algorithm using four signals of each detector, and improves the crystal identification at the center of the two detectors as compared to the COG algorithm using eight signals from both detectors. The RTP method significantly improves the overall flood histogram qualities of the two COG algorithms using either eight or six signals from the two detectors, and the two COG algorithm provide similar flood histogram quality when a power of 1.5 is used. Conclusion The novel positioning algorithms reduce the edge effect and improve the flood histogram quality for a PET detector consisting of two optically coupled detectors, each consisting of a pixelated scintillator crystal array and a SiPM array with highly multiplexed four signal readout. The positioning algorithms can be used in a PET scanner to improve the spatial resolution and sensitivity.

FPGA-based Research of Data Acquisition for PET Crystal Flood Image

High speed video signal acquisition and processing system based on FPGA technique

Design and evaluation of a FPGA-ADC prototype for the PET detector based on LYSO Crystals and SiPM arrays

FPGA Implementation of High-Speed Data Acquisition System for High-Resolution Millimeter Wave Radar.

The design of a time-interleaved analog-digital conversion modulator based on FPGA-TDC for PET application

A compact and highly integrated 128-channel FPGA-based readout electronics for nuclear imaging application

A Design of FPGA Based Small Animal PET Real Time Digital Signal Processing and Correction Logic

Real-Time FPGA-based Digital Signal Processing and Correction for a Small Animal PET

Algorithms to reduce the edge effect and improve the flood histogram quality of a PET detector consisting of two pixelated crystal arrays

FPGA Implementation of Feature Detection Algorithm Based on High Level Synthesis

Design of Super Multi-Channel and High-Speed Data Acquisition System Based on FPGA

Readout Electronics Development Based on an ASIC for PET Detector Using PMT-quadrant-sharing

A simple and robust method for fast crystal identification

An FPGA Based energy correction method for one-to-one coupled PET detector: model and evaluation

Dual threshold input receiver FPGA-only signal digitization method for time-of-flight positron emission tomography

Crystal Identification for a Dual-Layer-offset LYSO Based PET System Via Lu-176 Background Radiation and Mean Shift Algorithm

A flood map based DOI decoding method for block detector: a GATE simulation study.

FPGA based High Speed Data Acquisition System for High Energy Physics Application

A Neighborhood Standard Deviation Based Algorithm for Generating PET Crystal Position Maps

An FPGA Based Fast Linear Discharge Method for Nuclear Pulse Digitization

Development of the Data Acquisition System for Photoneutron Imaging