Abstract:Plastic injection molding is widely used in many industrial applications. Plastic products are mostly used as disposable parts or as portable parts for fast replacements in many devices and machines. However, mass production is always adopted as an ideal method to cover the huge demands and customers’ needs. The problems of warpage due to thermal stresses, non-uniform pressure distribution around cavities, shrinkage, sticking and overall products quality are some of the important challenges. The main objective of this work is to analyze the stress distribution around the cavities during the molding and demolding to avoid their effects on the product quality. Moreover, diagnosing the critical pressure points around and overall the cavity projection area, which is subjected to high pressure will help to determine the optimum pressure distribution and ensure filling all cavities at the same time, which is another significant objective. Computer-aided design (CAD) and CATIA V5R20 are adopted for design and modeling procedures. The computer-aided engineering (CAE) commercial software ABAQUS 6141 has been dedicated as finite element simulation packages for the analysis of this process. Simulation results show that stress distribution over the cavities depends on both pressure and temperature gradient over the contact surfaces and can be considered as the main affecting factor. The acceptable ranges of the cavity stresses were determined according to the following values: the cavity and core region temperature of 55–65 °C, filling time of 10–20 s, ejection pressure 0.85 % of injection pressure, and holding time of 10–15 s. Also, theoretical results reveal that the uniform pressure and temperature distribution can be controlled by adjusting the cavities layout, runner, and gate size. Moreover, the simulation process shows that it is possible to facilitate and identify many difficulties during the process and modify the prototype to evaluate the overall manufacturability before further investing in tooling. Furthermore, it is also concluded that tooling iterations will be minimized according to the design of the selected process

Application of FEA Simulations in Plastic Injection Molding Tooling Failure Analysis

Stress and Fatigue Analysis and Optimization of Platen for Injection Molding Machine

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Analysis of the main factors affecting mass production in the plastic molding process by using the finite element method

Application of CAE for mold flow analysis in plastic molding mold design

TECHNOLOGY Design Optimization of Stationary Platen of Plastic Injection Molding Machine Using FEA

Flow Simulation and Defects Analysis of Injection Molded Parts Based on CAE Technique

Application of Mold Flow Analysis Technology in Plastic Mold Analysis

Optimization of Injection Mold Based on Fuzzy Moldability Evaluation

Finite Element Simulation Technique for Evaluation of Opening Stresses Under High Plasticity

INTEGRATED SIMULATION OF MELT FLOW, FIBER FRACTURE AND FIBER ORIENTATION FOR FIBER REINFORCED PLASTICS IN INJECTION MOLDING

Cavity Filling Analysis of Injection Molding Simulation:The Formation of Bubble and Weld Line

An integrated simulation method for analyzing mechanical properties of injection molded fiber‐reinforced polymers

Analysis of the Stiffness and Strength of the Injection Mold for Cellphone Shell Based on ANSYS Workbench

Computer Simulation Analysis of Ceramic Powder Injection Molding Process and Molding Defects Formation

Research on the Application of Injection Molding Simulation Technology in Mold Design

Warpage of Injection-Molded Thermoplastics Parts: Numerical Simulation and Experimental Validation

Predicting failure in injection-moulded short-fibre subcomponents under varied environmental conditions through fracture mechanics

SIMULATION OF ALUMINUM FIXTURE PART HOT EXTRUSION PROCESS WITH THE FINITE VOLUME METHOD

Finite element analysis of residual stresses and thin plate distortion after face milling

Three-dimensional transient finite element cooling simulation for injection molding tools