Electromagnetic Transient Response Characteristics of Internal Faults in UHVDC Converter Station and Corresponding Control Strategy
DONG Man-ling,LI Xiao-lin,HE Jun-jia,ZHANG Dan-dan,HUANG Ying,CAI Zong-yuan,XIE Shi-jun
DOI: https://doi.org/10.13335/j.1000-3673.pst.2010.03.023
2010-01-01
Abstract:Taking±800 kV DC power transmission project from Yunnan to Guangdong for example,based on PSCAD/EMTDC a simulation model is built to research operation modes of converter station under internal faults of mis-conducting and non-conducting,and simulate the conditions that mis-conducting and non-conducting faults occur inside rectifier station and converter station respectively,and the electromagnetic transient process of DC transmission system and corresponding control strategies are research in depth.Research results are as following:the mis-conduction of inverter will cause commutation failure,however,because in general the mis-conducting fault will not recur,so the over-voltage and over-current due to oscillation will not appear;there is less possibility of mis-conducting fault of rectifier,so its affect on DC transmission system is slight;the nonconducting fault occurred in inverter side one after another will cause higher amplitude of current oscillation than that caused by the same fault occurred in rectifier side,and the caused over-voltage of neutral line will make an evident affect on negative pole;during the bipolar operation,when single-time non-conducting of a pole occurs or non-conducting of a pole occur one after another will affect on the operation of the another pole and cause narrow fluctuation,however the transmitted power will be reduced by half;when the mis-conducting or non-conducting faults lead to stronger oscillation of DC voltage and current,at rectifier side by means of the switchings between constant current control and minimum α_(min) the system can be quickly recovered,and at inverter side by means of the switchings between constant extinguish angle the system can be returned to normal condition.