Abstract:In order to improve performance of internal combustion engines and meet the requirements of the new pollutant emission regulations, advanced combustion strategies have been investigated. The newly designed partially premixed combustion concept has demonstrated its potential for reducing NOx and particulate matter emissions combined with high indicated efficiencies while still retaining proper control over combustion process by using different injection strategies. In this study, parametric variations of injection pressure, second injection and third injection timings were experimentally performed to analyze the effect of the injection strategy over the air/fuel mixture process and its consequent impact on gaseous compound emissions and particulate matter emissions including its size distribution. Tests were carried out on a newly designed two-stroke high-speed direct injection compression-ignition engine operating with the partially premixed combustion concept using 95 research octane number gasoline fuel. A scanning particle sizer was used to measure the particles size distribution and the HORIBA 7100DEGR gas analyzer system to determine gaseous emissions. Three different steady-state operation modes in terms of indicated mean effective pressure and engine speed were investigated: 3.5 bar indicated mean effective pressure and 2000 r/min, 5.5 bar indicated mean effective pressure and 2000 r/min, and 5.5 bar indicated mean effective pressure and 2500 r/min. The experimental results confirm how the use of an adequate injection strategy is indispensable to obtain low exhaust emissions values and a balance between the different pollutants. With the increase in the injection pressure and delay in the second injection, it was possible to obtain a trade-off between NOx and particulate matter emission reduction, while there was an increase in hydrocarbon and carbon monoxide emissions under these conditions. In addition, the experiments showed an increase in particle number emissions and a progressive shift in the particles size distribution toward larger sizes, increasing the accumulation-mode particles and reducing the nucleation-mode particles with the decrease in the injection pressure and delay in the third injection.

Experimental Investigation of Injection Strategies on Low Temperature Combustion Fuelled with Gasoline in A Compression Ignition Engine

An Experimental Investigation of the Effects of Fuel Injection Strategy on the Efficiency and Emissions of a Heavy-Duty Engine at High Load with Gasoline Compression Ignition

Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions

Investigation of Injection Parameters Coupled with Fuel Reactivity on Combustion and Emissions in Dual Direct-Injection GCI Engine

Study on the Influence Mechanism of Mixture Stratification on GCI Combustion and the Compound Injection Strategy under High Load Operation

Low Temperature Compression Ignition Combustion Control Strategy with Gasoline at Low Loads

Effects of the Intake Pressure on Gasoline Low Temperature Compression Ignition

Experimental Investigation of the Effects of Diesel Injection Strategy on Gasoline/diesel Dual-Fuel Combustion

The Lean-Burn Limit Extending Experiment on Gasoline Engine with Dual Injection Strategy and High Power Ignition System

Experimental Study of Stratified Lean Burn Characteristics on a Dual Injection Gasoline Engine

Experimental Investigation of the Performance and Emissions of a Dual-Injection SI Engine with Natural Gas Direct Injection Plus Gasoline Port Injection under Lean-Burn Conditions

Effects of different injection strategies on mixing, combustion and emission behavior of gasoline compression ignition (GCI) engines

Research on the Effects of Injection Strategy on Ltc Combustion Based on Two-Stage Fuel Injection

Improvement of high load performance in gasoline compression ignition engine with PODE and multiple-injection strategy

Effects of Pilot Injection Strategy on Combustion and Emission Characteristics in Gasoline Compression Ignition

Experimental Study the Effect of Injection Strategies on Combustion and Emission Characteristics in Gasoline Compression Ignition Engines Using Gasoline/hydrogenated Catalytic Biodiesel Blends

A Methodology for Stratified-Charge Preparation Via Low-Reactivity Fuel Multi-Injection Strategy in Intelligent Charge Compression Ignition (ICCI) Mode

Experimental Investigations of Gasoline Partially Premixed Combustion with an Exhaust Rebreathing Valve Strategy at Low Loads

Effects of multiple injection strategies on gaseous emissions and particle size distribution in a two-stroke compression-ignition engine operating with the gasoline partially premixed combustion concept

Exploring the Effects of the Key Multi-Injection Parameters on Combustion and Emissions in Intelligent Charge Compression Ignition (ICCI) Mode

Influences of Fuel Injection Strategies on Combustion Performance and Regular/irregular Emissions in a Turbocharged Gasoline Direct Injection Engine: Commercial Gasoline Versus Multi-Components Gasoline Surrogates