Abstract:This paper proposed a kind of guard traces based on a subwavelength periodic structure to reduce the far-end crosstalk (FEXT) of parallel microstrip lines in the PCB. This technology can be used to improve the false triggering and signal transmitting capacity of a multiconductor transmission line circuit system. In order to explore the present novel guard trace effect on isolating electromagnetic interference (EMI), the frequency response of the mutual capacitance and mutual inductance of the overall circuit system was provided and an equivalent circuit model was built. In comparison to the conventional microstrip line for isolating the EMI between parallel microstrip lines, the novel guard trace can efficiently reduce the mutual capacitance and mutual inductance of the overall circuit system. Thus, it is favorable for suppressing the crosstalk between microstrip lines. The $S$ -parameters calculation result showed that this kind of subwavelength periodic microstrip guard trace can isolate the EMI between two microstrip lines more effectively. Particularly, the conventional grounded guard trace needs a lot of dense grounded holes, which severely influences the wiring design of various layers of a multilayer circuit board. However, the proposed guard trace requires only one grounded hole, which has little influence on the circuit wiring of each layer of a multilayer printed circuit board. In our experiment, the step function signal of 30 ps rise time was imported into one microstrip line to measure the FEXT of the other microstrip line. It was demonstrated by the measurement result that the subwavelength periodic microstrip guard trace can reduce the FEXT to be below 5% of the transmission signal amplitude and is more flexible in practice. In compliance with the actual demand for a high-speed circuit, three isolation structures were proposed, and their isolation effects on the electromagnetic coupling between microstrip lines were verified individually.

Far-End Crosstalk Reduction In Adjacent Pcb Traces Employing High/Low-Z Configurations

Far-End Crosstalk Mitigation for Microstrip Lines in High-Speed PCBs

Far-End Crosstalk Mitigation Using Homogeneous Dielectric Substrate in DDR5

Barbed Transmission Lines for Crosstalk Suppression

A Novel Approach Base on Electric Field Analysis to Reduce Crosstalk Problem on PCB

A Multiconductor Reduction 3D Full-Wave Method for High Frequency Crosstalk Problem and Its Validation

An Application of the Subwavelength Periodic Microstrip Guard Trace in High-Speed Circuits

Layer Assignment Algorithm For Rlc Crosstalk Minimization

Design and Simulation to Reduce the Crosstalk of Ultra-Fine Line Width/space in the Redistribution Layer

A Novel Electromagnetic Bandgap Design Applied for Suppression of Printed Circuit Board Electromagnetic Radiation

High Speed Parallel Signal Crosstalk Cancellation Concept

Using Square Cross Structure for Far-End Crosstalk Reduction on Microstrip Signal Lines in DDR5

A Shielding Structure for Crosstalk Reduction in Silicon Interposer

Crosstalk suppression for high-density traveling-wave MZM array based on static and dynamic combined analysis and circuit-level designs

Crosstalk Reduction in TSV Arrays with Direct Ohmic Contact Between Metal and Silicon-Substrate

Crosstalk analysis in frequency and time domain using FDTD-VF method

Reduction of Crosstalk on Printed Circuit Board Using Genetic Algorithm in Switching Power Supply

Altered Phase Velocity Lines For Low Crosstalk Microstrip Interconnection Of High-Speed Digital Circuits: Design And Experimental Validation

Method Using Derivative Circuit to Reduce Crosstalk Between Transmission Lines in PCB

A novel method for low impedance design of power and ground planes

Analysis of the Effect of Crosstalk Reduction Due to the Vias Spacing of Additional Grounded Tracks