Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

Fe-Based Solid Reference Electrode Utilized in Ysz-Based Oxygen Sensor

Novel Solid-State Manganese Oxide-Based Reference Electrode for Ysz-Based Oxygen Sensors

Working Mechanism of Novel Mn-Based Reference Electrode for Solid-State Electrochemical Gas Sensors

Low Temperature Preparation of YSZ-based Thin-Film Limiting Current Type Oxygen Sensor

Aligned Nanofibers Incorporated Composite Solid Electrolyte for High-Sensitivity Oxygen Sensing at Medium Temperatures

The NO<sub>2</sub> Response of Solid Electrolyte Sensors Made Using ZnFe<sub>2</sub>O<sub>4</sub> Electrodes

Study on High-Temperature Electronic Conductivity and Thermal Shock Resistance of Zirconia Used as an Oxygen Sensor

Sensing behavior of YSZ-based amperometric NO₂ sensors consisting of Mn-based reference-electrode and In₂O₃ sensing-electrode.

A review of high-temperature electrochemical sensors based on stabilized zirconia

Effect of calcination temperature on sensing performance of YSZ based electrochemical H2S gas sensor with a NiFe2O4 electrode

Electrochemical Stability of La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated YSZ Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Electrochemical Performance and Stability of Sr-doped LaMnO 3 -Infiltrated Yttria Stabilized Zirconia Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Electrochemical Impedance Spectroscopy Study of Ceria- and Zirconia-Based Solid Electrolytes for Application Purposes in Fuel Cells and Gas Sensors

Study on the Properties of Ysz Electrolyte Made by Plaster Casting Method and the Applications in Solid Oxide Fuel Cells

Infiltration of La0·6Sr0·4FeO3-δ Nanoparticles into YSZ Scaffold for Solid Oxide Fuel Cell and Solid Oxide Electrolysis Cell

High-sensitivity SO2 Gas Sensor Based on YSZ Electrolyte and SrTiO3 Sensing Electrode

YSZ-Based Mixed Potential Type Sensors Utilizing Pd-doped SrFeO 3 Perovskite Sensing Electrode to Monitor Sulfur Dioxide Emission

Nano-structured (La, Sr)(Co, Fe)O3 + YSZ composite cathodes for intermediate temperature solid oxide fuel cells

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

Fabrication Of High Performance Oxygen Sensors Using Multilayer Oxides With High Interfacial Conductivity

Preparation and properties of Sm0.9Pr0.1FeO3-δ electrode materials for symmetrical solid oxide fuel cells