Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

Facile synthesis and phase transition of V2O3 nanobelts

Thermal-stimulated Phase Transition of Vanadium Dioxide Enabling Versatile Transduction and Smart Applications

Metal-Insulator Transition of Single-Crystal V2O3 Through Van Der Waals Interface Engineering

Facile Synthesis and Electrical Switching Properties of V2O3 Powders

Effects of Oxygen Vacancies and Interfacial Strain on the Metal-Insulator Transition of VO2 Nanobeams.

Synthesis and Phase Transition Behavior of Undoped VO2 with a Strong Nano-Size Effect

Magnetic phase transition in V2O3 nanocrystals

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition

A liquid approach for the synthesis of M phase VO2 nanocrystals: Facile synthesis, characterization and reaction mechanism

Hydrothermal Synthesis and Phase Transition Properties of Uniform Free-standing Vanadium Dioxide Nanowires

Phase transition characteristics in the conductivity of VO2(A) nanowires: size and surface effects

New-phase VO2 Micro/nanostructures: Investigation of Phase Transformation and Magnetic Property

Nanoscale Engineering in VO2 Nanowires Via Direct Electron Writing Process.

Controllable Growth of 2D V3S5 Single Crystal by Chemical Vapor Deposition

Direct Hydrothermal Synthesis of Monoclinic VO2(M) Single-Domain Nanorods on Large Scale Displaying Magnetocaloric Effect

Phase management in single-crystalline vanadium dioxide beams

Hydrothermal Synthesis of VO 2 (A) Nanobelts and Their Phase Transition and Optical Switching Properties

Direct Preparation and Formation Mechanism of Belt-Like Doped VO2(M) with Rectangular Cross Sections by One-Step Hydrothermal Route and Their Phase Transition and Optical Switching Properties

Synthesis of VO2(A) nanostructures by a hydrothermal method and their transition to VO2(M)

Facile Growth of Thermochromic VO2Nanostructures with Greatly Varied Phases and Morphologies

X-ray Nano-imaging of a Heterogeneous Structural Phase Transition in V2O3