Abstract:The horizontal steam generator is generally used in nuclear power plant and industry to produce steam. To increase the heat load and reduce the size, a steam drum can be added above the shell. However, it makes the overall flow of water cycle complicated. In this article, the two-phase boiling flow and heat transfer inside tube bundle under the separated structure has been investigated numerically based on the previous experiment. The Drift-Flux model was utilized to solve the equations of heat and mass transfer in the mixture flow. The local pressure drop, void fraction and heat transfer characteristics have been presented and discussed for different arrangements in detail. The analysis results showed that the overall boiling HTC of the tube arrangements of 30 degrees and 60 degrees appear better for this steam generator under the same condition. The boiling heat transfer in both bottom and upper tube bundle was mainly controlled by the nucleate boiling mechanism. However, both heat flux and vapor void fraction were found to affect the heat transfer performance. Beyond this analysis, a new type of heat transfer correlation has been proposed herein to evaluate the local HTC with a good accuracy. These correlations allow better predictions of the boiling heat transfer inside the SS-SG, which provide designers with better reference and guidance.(c) 2022 Elsevier Ltd. All rights reserved.

Cfd Analysis of Subcooled Wall Boiling at Shell Side of Steam Generator with Tsp

Numerical Prediction of Subcooled Wall Boiling in the Secondary Side of SG Tubes Coupled with Primary Coolant

Numerical Simulation of Two-phase Flow in Subcooled Boiling Region of Steam Generator

Numerical Investigation of Coupled Heat Transfer Between Primary and Secondary Side of SG Tube and Subcooled Flow Boiling on Secondary Side

CFD Analysis on Subcooled Boiling Phenomena in PWR Coolant Channel

Coupled Analysis on Steady Flow in Primary and Secondary Sides of PWR Steam Generator

Study on Secondary Side Flow of Steam Generator with Coupled Heat Transfer from Primary to Secondary Side

Three-Dimensional Steady Simulation On Two-Phase Flow In Secondary Side Of Steam Generator

CFD Analysis of the Steam Side in a Cross-Flow X-Type Steam Superheater

Three dimensional thermal hydraulic coupling method on pwr steam generator using cfd method

Three-Dimensional Study on Steady Thermohydraulics Characteristics in Secondary Side of Steam Generator

Numerical Investigation of Flow and Heat Transfer of Supercritical Water in the Water-Cooled Wall Tube

Numerical Investigation on the Thermal-Hydraulic Performance of Separated Structure Steam Generator with Different Tube Arrangements

Investigating the Distribution Characteristics of Boiling Flow and Released Nuclide in the Steam Generator Secondary Side Using CFD Methodology

Effect of Circumferential Flow Non-uniformity on the Temperature Distribution of Membrane Water Wall in Supercritical Boilers and Simplified Calculation Methods

NUMERICAL INVESTIGATION ON HEAT TRANSFER TO SUPERCRITICAL WATER FLOWING UPWARD IN A 4-M LONG BARE VERTICAL CIRCULAR TUBE

Full-scale Numerical Study on the Flow Characteristics and Mal-Distribution Phenomena in SG Steam-Water Separation System of an Advanced PWR

Numerical Investigation on Turbulent Heat Transfer of Supercritical CO2 in a Helically Coiled Tube

CFD investigating the impacts of changing operating conditions on the thermal-hydraulic characteristics in a steam generator

Thermal-Hydraulic Simulation of Localized Flow Characteristics in a Steam Generator

Numerical Analysis on Subcooled Boiling in PWR Coolant Channel Based on a Modified Multi-Scale Interface Model