Abstract:In order to investigate the boiling behaviors on the fuel rod of PWR, the experiment of flow boiling is performed to investigate the boiling heat transfer and bubble behavior in a square channel with one heating rod with simple spacer grids, and this experiment is carried out by the experimental test in Chongqing University, called CQUThT (Chongqing University Thermal-hydraulic Test). However, due to the limitations of measuring methods, visualization experiments can only be performed to obtain local visualization data, but local flow field characteristic parameters are difficult to obtain. Therefore, a numerical study firstly are performed, and some ideas of present work will not only be carried out in our next experiment, but also help deeply understand the boiling mechanism. In this paper, Computational Fluid Dynamics (CFD) research of flow boiling and heat transfer in single rod channel is carried out based on RPI wall boiling model by CFD code Fluent. The numerical model is validated with published experimental date. According to numerical results, it can be seen that the numerical model is able to calculate the cross sectional averaged void fraction in a vertical tube. The visualization experiments of flow boiling will be performed in the next step to investigate the boiling characteristics of a vertical square channel with one heating rod. In this study, the heat flux is the possible critical heat flux under corresponding working condition based on Bowring correlation; and the purpose of this work is focusing on the flow boiling and heat transfer when the heat flux is approaching critical heat flux. This work is meaningful for the subsequent integration on the mechanism of boiling two-phase flow.

Numerical Simulation of Two-phase Flow in Subcooled Boiling Region of Steam Generator

Numerical Investigation of Coupled Heat Transfer Between Primary and Secondary Side of SG Tube and Subcooled Flow Boiling on Secondary Side

Numerical Prediction of Subcooled Wall Boiling in the Secondary Side of SG Tubes Coupled with Primary Coolant

Cfd Analysis of Subcooled Wall Boiling at Shell Side of Steam Generator with Tsp

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Three-Dimensional Steady Simulation On Two-Phase Flow In Secondary Side Of Steam Generator

Thermal-Hydraulic Simulation of Localized Flow Characteristics in a Steam Generator

Three-Dimensional Study on Steady Thermohydraulics Characteristics in Secondary Side of Steam Generator

Numerical Analysis of the Flow Behavior in a Helically Coiled Once Through Steam Generator

Coupled Analysis on Steady Flow in Primary and Secondary Sides of PWR Steam Generator

Study on Secondary Side Flow of Steam Generator with Coupled Heat Transfer from Primary to Secondary Side

Development and preliminary verification of a 1D–3D coupled flow and heat transfer model of OTSG

Numerical Investigation on the Thermal-Hydraulic Performance of Separated Structure Steam Generator with Different Tube Arrangements

Transient Numerical Simulation and Two-phase Flow Instability Prediction of Convective Boiling in Vertical Up-flow Tube

Numerical Simulation of Subcooled Flow Boiling and Application to the EAST Plasma Facing Components

Numerical simulation on heat transfer of supercritical LNG in coil tubes of submerged combustion vaporizer

Numerical Simulation on Heterogeneous Heat Transfer in Water at Supercritical Pressures in Inclined Upward Tubes

CFD Analysis on Subcooled Boiling Phenomena in PWR Coolant Channel

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

NUMERICAL SIMULATION ON FLOW BOILING HEAT TRANSFER IN A SQUARE CHANNEL WITH A HEATING ROD NEAR CRITICAL HEAT FLUX CONDITIONS

CFD investigating the impacts of changing operating conditions on the thermal-hydraulic characteristics in a steam generator