Abstract:Spout-fluid beds are widely used in the process industry due to their facilitation of an efficient contact between particles and gas. In this paper, a two-fluid model (TFM) is set up to reproduce the various flow structures encountered during spout-fluid bed operation. The effects of normal restitution model and gas-solid drag model are assessed by comparing simulation results with the experimental and discrete particle modeling (DPM) data of Link et al. [Link et al. Chem. Eng. Sci. 2005, 60, 3425-3442; Link et al. AIChE J. 2008, 54, 1189-1202.]. Simulation results show that application of an effective restitution coefficient in TFM can improve the accuracy of prediction significantly. The drag model of HKL predicts a more reasonable result than models of Huilin-Gidaspow, BVK, and Syamlal and O'Brien. Analysis on relative contributions of kinetic motion, friction, and collision to particle-particle momentum transfer parameters, namely, particle pressure and viscosity, shows that particle-particle momentum transfer in the spout and fountain regions is dominated by kinetic motion and that in the annulus region is dominated by friction. A transition region between spout and annulus regions is proposed. This region can be delineated using a single parameter of dimensionless collisional particle pressure because in this region, particle pressure is dominated by the collisional contribution. With an increasing spout-fluid ratio, the stable spout-annulus-fountain structure gradually shifts to an unstable bubble-slug structure. The effect of collision increases and extends to the entire bed. Meanwhile, the effects of kinetic motion and friction decrease. When slugs are formed, a rebound in the influence of friction is observed, accompanied by a decrease in the influence of collision.

Two-Phase Model of Markov Processes for Particle Transport in Fluidized Bed Reactors

Novel Phase Inversion Model for Gas–solid Turbulent Fluidized Beds

Particle Motion in Two‐ and Three‐Phase Fluidized‐Bed Reactors Determined by Pulsed Field Gradient Nuclear Magnetic Resonance

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

First Exit Time of Markov Processes for Particle Transport in Fluidized Bed Reactors

Mean Residence Time of Markov Processes for Particle Transport in Fludized Bed Reactors

Two-Way Coupling Model for Fractal-Like Agglomerate-Laden Multiphase Flow

Modeling of Dense Particle-Gas Two-phase Reacting Flow in Lagrangian Approach

Improved Model of Dense Gas-Particle Two-Phase Flow

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Investigation of mixing/segregation of mixture particles in gas-solid fluidized beds

Stochastic Formulation of Particle Kinetics in Wall-Bounded Two-Phase Flows

Particle transport by jet pump in a new liquid–solid circulating moving bed reactor

Experiment and Simulation Using Diffusion Flux Model for Gas-Particle Two-Phase Flow in a Suspension Bed

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Probability distribution model for particles in a fluidized bed consisting of binary mixtures of different density and size

A Fundamental CFD Study of the Gas–solid Flow Field in Fluidized Bed Polymerization Reactors

Towards a phase-field based model for combustion in particle beds: Reactive fluid flow

Two-Fluid Simulation of a Three-Dimensional Spout-Fluid Bed: Flow Structures, Regimes, and Insight into the Mechanism of Particle–Particle Momentum Transfer