Abstract:Advances in pore-scale imaging (e.g., μ-CT scanning), increasing availability of computational resources, and recent developments in numerical algorithms have started rendering direct pore-scale numerical simulations of multi-phase flow on pore structures feasible. Quasi-static methods, where the viscous and the capillary limit are iterated sequentially, fall short in rigorously capturing crucial flow phenomena at the pore scale. Direct simulation techniques are needed that account for the full coupling between capillary and viscous flow phenomena. Consequently, there is a strong demand for robust and effective numerical methods that can deliver high-accuracy, high-resolution solutions of pore-scale flow in a computationally efficient manner. Direct simulations of pore-scale flow on imaged volumes can yield important insights about physical phenomena taking place during multi-phase, multi-component displacements. Such simulations can be utilized for optimizing various enhanced oil recovery (EOR) schemes and permit the computation of effective properties for Darcy-scale multi-phase flows.We implement a phase-field model for the direct pore-scale simulation of incompressible flow of two immiscible fluids. The model naturally lends itself to the transport of fluids with large density and viscosity ratios. In the phase-field approach, the fluid-phase interfaces are expressed in terms of thin transition regions, the so-called diffuse interfaces, for increased computational efficiency. The conservation law of mass for binary mixtures leads to the advective Cahn–Hilliard equation and the condition that the velocity field is divergence free. Momentum balance, on the other hand, leads to the Navier–Stokes equations for Newtonian fluids modified for two-phase flow and coupled to the advective Cahn–Hilliard equation. Unlike the volume of fluid (VoF) and level-set methods, which rely on regularization techniques to describe the phase interfaces, the phase-field method facilitates a thermodynamic treatment of the phase interfaces, rendering it more physically consistent for the direct simulations of two-phase pore-scale flow. A novel geometric wetting (wall) boundary condition is implemented as part of the phase-field method for the simulation of two-fluid flows with moving contact lines. The geometric boundary condition accurately replicates the prescribed equilibrium contact angle and is extended to account for dynamic (non-equilibrium) effects. The coupled advective Cahn–Hilliard and modified Navier–Stokes (phase-field) system is solved by using a robust and accurate semi-implicit finite volume method. An extension of the momentum balance equations is also implemented for Herschel–Bulkley (non-Newtonian) fluids. Non-equilibrium-induced two-phase flow problems and dynamic two-phase flows in simple two-dimensional (2-D) and three-dimensional (3-D) geometries are investigated to validate the model and its numerical implementation. Quantitative comparisons are made for cases with analytical solutions. Two-phase flow in an idealized 2-D pore-scale conduit is simulated to demonstrate the viability of the proposed direct numerical simulation approach.

Towards a phase-field based model for combustion in particle beds: Reactive fluid flow

Low Mach number lattice Boltzmann model for turbulent combustion: flow in confined geometries

Hybrid Regularized Lattice-Boltzmann Modelling of Premixed and Non-Premixed Combustion Processes

Modeling Droplet Vaporization and Combustion with the Volume of Fluid Method at a Small Reynolds Number

Modelling and Simulation on Compressible Multi-Component Gas-Liquid Flows with Chemical Reaction and Phase Transition Effects

An Enhanced Compressible Two-Phase Flow Model with Detailed Chemistry under the Adaptive Mesh Refinement Frame

A Multicomponent Real-Fluid Fully Compressible Four-Equation Model for Two-Phase Flow with Phase Change

Hydrodynamic Resolved Simulation of a Char Particle Combustion by Immersed Boundary-Lattice Boltzmann Method

A phase-field method for the direct simulation of two-phase flows in pore-scale media using a non-equilibrium wetting boundary condition

Phase Field Lattice Boltzmann Model For Two-Phase Flow Coupled With Additional Interfacial Force

Modeling and Simulation of Chemically Reacting Flows in Gas-Solid Catalytic and Non-Catalytic Processes

A Rigorous Model for the Simulation of Chemical Reaction in Gas-Particle Bubbling Fluidized Bed: I. Modeling and Validation

Fokker-Planck-Poisson kinetics: Multi-phase flow beyond equilibrium

An interfacial profile-preserving approach for phase field modeling of incompressible two-phase flows

Phase-field-based lattice Boltzmann method for two-phase flows with interfacial mass or heat transfer

An efficient phase-field method for turbulent multiphase flows

An anisotropic Reynolds mass flux model for the simulation of chemical reaction in gas-particle CFB risers

A Generalized CFD Model for Evaluating Catalytic Separation Process in Structured Porous Materials

Phase Field Model for Non-equilibrium Interface Conditions

Particle scale study of heat transfer in the fluidized bed combustion process

Monolithic simulation of convection-coupled phase-change - verification and reproducibility