Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Probability distribution model for particles in a fluidized bed consisting of binary mixtures of different density and size

Research on particle mixing in a fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Hydrodynamics of Gas–solid Turbulent Fluidized Bed of Polydisperse Binary Particles

Size Segregation of Binary Mixture of Solids in Bubbling Fluidized Beds

Investigation of flow behaviors in a fluidized bed reactor with binary mixture of Geldart-A and B particles

Investigation of mixing/segregation of mixture particles in gas-solid fluidized beds

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Mixing/segregation characteristics and bubble behaviors of density-segregated binary particles in a pressurized fluidized bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Segregation and mixing of binary mixtures of spherical particles in a bubbling fluidized bed

Prediction of Radial Distribution Function of Particles in a Gas−Solid Fluidized Bed Using Discrete Hard-Sphere Model

CFD Investigation of Particle Fluctuation Characteristics of Bidisperse Mixture in a Gas–solid Fluidized Bed

A Microscopic Study on the Mixing Process of Binary Solids in Bubbling Fluidized Bed

Particle Population Balance Model for a Circulating Fluidized Bed Boiler

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Estimation of Particle Dispersion Characteristics in a Fluidized Bed with the Binary Mixture of Geldart A and B Types Using the Optical Fiber Probe Method