Abstract:Little detailed information is available on the microwave drying characteristics of potato and the use of different microwave powers to dry food products. Experiments were conducted to study the microwave drying characteristics and the dried quality of potato. The study focuses on describing the microwave drying characteristics of potato and discussing the effect of sample thickness, drying power and mass. The results show that if the power level increases, the mass load decreases and the thickness of the sample decreases, the dehydration rate increases and the drying energy consumption decreases. There are two falling rate periods during microwave drying of potato: the first falling rate period is for a moisture content of more then 1.1 (dry basis, DB); the second falling rate period is for a moisture content of less than 1.1 (DB). The same water loss will consume more energy when the moisture content is less than 1.1 (DB). A two-stage drying process was employed during microwave drying of potato. The microwave power of the first drying stage differed form that of the second drying stage. The moisture content of the breakpoint for the conversion of the first drying stage into the second drying stage is a moisture content of 1.1 (DB). A quadratic orthogonal regression experiment was conducted, and the effects of slice thickness, the first drying load power and the second drying load power on sensory quality, the rehydration ratio and the energy consumption rate were established. The slice thickness, the first drying load power and the second drying load power linearly affected the three indices. The effect of the product of the second drying load power and the potato slice thickness on the rehydration ratio and the energy consumption rate is significant. The optimum drying parameter combination for the three indices was obtained. The rehydration ratio of the dried products decreased with an increase of the second drying load power and the slice thickness. The concave curves of the sensory quality versus the three factors were shown.

Microwave Drying Characteristics and Kinetic Model of Food Waste

Microwave Drying Optimization and Kinetic Modeling of Fly Ash from Municipal Solid Waste Incineration

Influence of microwave drying on the combustion characteristics of food waste

Characteristics and Model of Microwave Drying Sweet Potato

Studies on the Microwave Drying Characteristics and Mathematical Model of Water-oat

Microwave Vacuum Drying Properties and Kinetics Model of Radix Paeoniae Rubra Extract

Research of Intermittent Microwave Drying Properties and Kinetic Model of Water Chestnut Wet-starch

Microwave Drying of Food and Agricultural Materials: Basics and Heat and Mass Transfer Modeling

The Drying Characteristics and Technology of Potato Slices by Microwave

Microwave drying behavior, energy consumption, and mathematical modeling of sewage sludge in a novel pilot-scale microwave drying system

Study on Microwave-Induced Thin-Layer Drying of Municipal Sludge for Fuel Reclamation

Microwave Drying of Sewage Sludge: Process Performance and Energy Consumption

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Microwave Drying Characteristics of Potato and the Effect of Different Microwave Powers on the Dried Quality of Potato

Investigation of Microwave-Induced Thin-Layer Drying for Municipal Sludge

Simulation of Microwave Thin Layer Drying Process by a New Theoretical Model

Effective moisture diffusivity, activation energy and kinetic models of microwave-assisted-foam-mat-drying of berry pulp

Study of Microwave Vacuum Drying Characteristic and Kinetics Model of Green Tea

Effect of Temperature and Microwave Power Levels on Microwave Drying Kinetics of Zhaotong Lignite

Microwave–vacuum Drying Kinetics of Carrot Slices

Reducing the Energy Consumption during Microwave Drying of Coal Slime Dough by Optimizing Parameters: Experiment and Modeling