Abstract:Aerogel is a kind of high-performance lightweight open-porous solids with ultralow density, high specific surface area, and broad application in many emerging fields including biotechnology, energy, environment, aerospace, etc. A giant challenge remains in preventing of the hydrophilic aerogel framework shrinkage when replacing of solvent with air in its extremely abundant nanosized pores during its fabrication process in ambient conditions. In this work, started from a linear polymeric precursor with further condensation reaction, superhydrophilic silica aerogels with self-reinforced microstructure and the least volume shrinkage have been successfully obtained via ambient pressure drying process without use of any additives in the presence of a low surface tension solvent. The resulting superhydrophilic silica aerogels possess specific surface area up to 1065 m2/g, pore volume up to 2.17 cm3/g and density down to 84 mg/cm3, and these values are comparable to those of their counterparts obtained by supercritical CO2 drying process. Moreover, as an application demonstration, the bioinspired hydrogels with desirable mechanical flexibility and adhesive performance at extremely harsh environment (e.g., below −50 °C) have been successfully synthesized by mimicking carrier of a functional bioagent with the resulting superhydrophilic silica aerogel microparticles. Our work has made a significant step forward for future high-performance hydrophilic aerogels with self-enhanced microstructures and the resulting superhydrophilic aerogels have shown great potentials in making functional hydrogels with bionic properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.langmuir.1c00476?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.langmuir.1c00476</a>.Photo images, 1H NMR spectra, LC-MS of T-TEOS and ESOM, N2 absorption–desorption isotherms of the silica aerogels and xerogel, proposed structure of T-TEOS, ESOM, and silica gels, SEM image of silica aerogel derived from T-TEOS and ESOM, photo images of the drying process of the silica aerogel and xerogel, the process of releasing glycerol and absorbing water from silica aerogels, the amount of glycerol released from silica aerogel versus time, theoretical calculation of interaction strength of PVA–PET and PVA–PS, synthetic parameter, physical properties of the silica aerogels and xerogels (<a class="ext-link" href="/doi/suppl/10.1021/acs.langmuir.1c00476/suppl_file/la1c00476_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis of Polyimide Cross-Linked Silica Aerogels with Good Acoustic Performance

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Polyimide-Silica Hybrid Aerogels with High Mechanical Strength for Thermal Insulation Applications

Co-polyimide Aerogel Using Aromatic Monomers and Aliphatic Monomers As Mixing Diamines

Isocyanate-crosslinked silica aerogel monolith with low thermal conductivity and much enhanced mechanical properties: Fabrication and analysis of forming mechanisms

Fabrication of Mechanically Strong Silica Aerogels with the Thermally Induced Phase Separation (TIPS) Method of Poly(methyl methacrylate)

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Development of superhydrophobic hybrid silica-cellulose aerogel as promising thermal insulation and sound absorption

Flexible, high-temperature-resistant silica-polymer aerogel hybrids by templating polymethylsilsesquioxane microstructure with trace polyimide

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

"Tuning density and morphology of organic-inorganic hybrid-silica aerogels through precursor dilution for lightweight applications"

Mechanically robust poly(urethane-imide) aerogels with excellent thermal insulation and sound absorption by ambient drying

Effect of polymer concentration and cross-linking density on the microstructure and properties of polyimide aerogels

Reproducible Superinsulation Materials: Organosilica-Based Hybrid Aerogels with Flexibility Control

Silica Aerogels with Self-Reinforced Microstructure for Bioinspired Hydrogels

Ultrahigh-strength silicone aerogels reinforced by an armor-like epoxy framework via a temperature-controlled sequential reaction strategy

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

High Compression Strength and Thermal Insulation Silica Aerogel Monolith with Scaffold of a Cyclic Olefin Siloxane Co-Oligomer Via Ambient Pressure Drying

Ultralight and heat-insulating mesoporous polyimide aerogels cross-linked with aminated SiO2 nanoparticles

One-pot Synthesis of Polymer-Reinforced Silica Aerogels from High Internal Phase Emulsion Templates.