Abstract:Achieving high data rate with simple system configuration and low power consumption is of great interest in short-reach intensity-modulation direct-detection (IM-DD) fiber links for future datacenter networks, business local area networks and so forth. For external modulation-based IM-DD, recently remarkable modulator performance has been achieved in terms of 3dB bandwidth, exploiting different materials/platforms. However, due to the relatively-high RF-to-RF (or end-to-end) signal loss, optical amplifiers (OA) and/or RF amplifiers (RFA) were typically needed for IM-DD links, which increases the complexity and power dissipation. In this work, we present a more comprehensive figure of merit (FoM) for modulator (and link) design, namely “slope efficiency (SLE)”, which takes into account not only the bandwidth but also the half-wave voltage and the RF/optical waveguide losses, and can provide a guiding principle of the modulator design toward lower RF-to-RF signal loss. With a high-SLE modulator, both OA and RFA can be omitted even when supporting broadband signals with CMOS-level driving voltages. We theoretically investigate the impact of modulators with different technology and SLE on the IM-DD pulse amplitude modulation (PAM) link. Next, we report a series of PAM transmission experiments with a high-SLE Lithium Niobate intensity modulator prototype, which enables sub-1Vpp driving, up-to-432Gb/s PAM transmission over up-to-600m single-mode fiber in C-band with OA&RFA-free reception and low digital signal processing (DSP) complexity. For instance, for 384Gb/s PAM8 over 300m, the transmitter was DSP-free while a symbol-spaced decision-feedback equalizer (DFE) with 61 feedforward taps and 1 feedback tap was sufficient for the receiver considering 16.7% hard-decision (HD)-FEC. Furthermore, we experimentally show that the high-SLE modulator supports ultra-wide fiber transmission bands (O-, S-, C- and L-band).

Modulator-Based High-Speed Optical Signal Processing For Optical Time-Division Multiplexing

Optical time-division multiplexing signal processing using electro-optic modulators

Recent Progress on Ultrahigh Speed Optical Modulator

Optical signal processing for advanced optical modulation format

Single-Source Duplex High-Speed FSO Communications Using Electro-Optic Modulator-Based MRR

30 Gbps high optical bandwidth silicon modulator

All-optical signal processing for ultrahigh-speed optical communication

Optical Time-Division Demultiplexing Using a Time-Lens-Assisted Mach–Zehnder Modulator

Design and Electro-Optical Co-Optimization of High-Speed Travelling Wave Silicon-Organic Hybrid Modulators

Signal Generation and Processing at 100 Gb/s Based on Optical Time Division Multiplexing

Multifunctional Optoelectronic Oscillator Based on Cascaded Modulators

High-performance Coherent Optical Modulators based on Thin-film Lithium Niobate Platform

Simultaneous All-Optical Demultiplexing and Regeneration Based on Self-Phase and Cross-Phase Modulation in a Dispersion Shifted Fiber

Simultaneous Otdm De-Multiplexing And Power Amplification Using Optical Parametric Amplifier With A Clock-Modulated Pump

Effective Optical Clock Recovery and Simultaneous Fourfold Demultiplexing of Otdm Signal Using an Optoelectonic Oscillator

Recent Progress on High-Speed Optical Transmission

Design and Performance Analysis of a Novel Method for Clock and Data Recovery in 10.3125Gbps Optical Mod-Demodulation Systems

Optoelectrical Clock Recovery with Dispersion Monitoring for High Speed Transmission

Empowering high-dimensional optical fiber communications with integrated photonic processors

Novel Schemes to Generate Multi-Level Modulation Formats for Ultra-Capacity Coherent Detection Transmission Systems

High-Speed Low-Complexity Optical PAM Links With a High-Slope-Efficiency Optical Modulator: Analysis and Demonstration