Abstract:Welding technique is generally used in nuclear power plant for manufacturing and machining important components such as steam generator. The similar metal weld and dissimilar metal weld were commonly involved to connect and fixup tubings in steam generators. However, in recent years large amounts of cracking accidents have been observed in the welded joints. A concern has been raised about the integrity and reliability in the joint transition zone due to the high susceptibility of heat affected zone (HAZ) and fusion zone (FZ) to stress corrosion cracking (SCC). In this study, the similar metal and dissimilar metal joints were investigated and compared, focusing on the correlation between microstructure, residual strain and SCC behavior. The microstructures of transition zone in Ni-based Alloys 690 and 52 similar metal joint and Alloys 182 and A533B low alloy steel dissimilar metal joint were investigated comprehensively by SEM, EBSD, TEM. The residual strain distribution in the HAZ of 690-52 similar metal joint was quantitatively measured. The SCC behavior of 182-A533B dissimilar metal joint in high temperature oxygenated water were simulated by creviced bent beam specimen. The HAZ in the similar joint exhibits higher residual strain, sensitive microstructure and high susceptibility to SCC, therefore, the HAZ region deserve more attention during the inspection and examination of components. The FZ of the dissimilar metal joint exhibits complicated microstructure and chemical composition. The type-II which parallels the fusion boundary (FB) and type-I linking the FB and type-II was typical in the FZ of the dissimilar weld. The SCC susceptibility and cracking growth rate are higher at type-II boundary in the FZ. The role of type-I boundary is to lead the crack growth to the FB. After reaching the FB, the crack growth is blunted by pitting. The FB plays a barrier role to the crack growth in the low alloy steel. The FZ in dissimilar metal joint is weak and high susceptible to SCC.

Review on SCC Crack Growth Behavior of Dissimilar Metal Welds for Nuclear Power Reactors

Review of Stress Corrosion Cracking of Structural Materials in Nuclear Power Plants

Effect of Mechanical Heterogeneity on Strain and Stress Fields at Crack Tips of SCC in Dissimilar Metal Welded Joints

Microstructure and Stress Corrosion Cracking of a SA508-309L/308L-316L Dissimilar Metal Weld Joint in Primary Pressurized Water Reactor Environment

Understanding Stress Corrosion Cracking (SCC), Affecting Variables and Prevention Strategies in Nuclear Power Plants—A Review

A Review of Corrosion Failure of Welded Structural Metallic Materials for Light Water Reactor Plant

Study of Microstructure and Stress Corrosion Cracking Behavior in Welding Transition Zone of Ni-Based Alloys

Analysis of Stress Corrosion Cracking Growth Rate in the Heat-Affected Zone of 316L Based on the Heterogeneity of the Mechanical Properties

Effect of Overlaying Welding Repair on Stress Corrosion Cracking Sensitivity of Low-Pressure Nuclear Steam Turbine Rotor in the Simulated Environment

Numerical Investigation of Ductile Crack Growth Behavior in a Dissimilar Metal Welded Joint

Sulphide Stress Cracking Behaviour of the Dissimilar Metal Welded Joint of X60 Pipeline Steel and Inconel 625 Alloy

Microstructure, Residual Strain and Stress Corrosion Cracking Behavior in 316L Heat-Affected Zone

Microstructure, Local Mechanical Properties and Stress Corrosion Cracking Susceptibility of an SA508-52M-316LN Safe-End Dissimilar Metal Weld Joint by GTAW

Quantification of SCC mechanisms in austenitic alloys under PWR primary water conditions

Correlation of Microstructure and Stress Corrosion Cracking Initiation Behaviour of the Fusion Boundary Region in a SA508 Cl. 3-Alloy 52M Dissimilar Weld Joint in Primary Pressurized Water Reactor Environment

Comparison of the Stress Corrosion Cracking Behaviour of AISI 304 Pipes Welded by TIG and LBW

Effect of Loading Mode on Fracture Behavior of CrNiMoV Steel Welded Joint in Simulated Environment of Low Pressure Nuclear Steam Turbine

Analysis of Crack Propagation Behaviors in RPV Dissimilar Metal Welded Joints Affected by Residual Stress

Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints

Stress corrosion crack propagation affected by microstructures for nuclear steam turbine rotor steels in the simulated environment

Analysis of Crack Propagation of Annular Butt Weld and Distribution of Weld-Induced Residual Stress