Abstract:Corrosion of metallic structures widely existed in multiple industries, such as oil and gas, civil infrastructure, aerospace, mechanical, mining, and processing. Current available corrosion-monitoring methods are based on different sensing principles, which have their own advantages, and some drawbacks that may limit their application on some aspects. This article presents an electromechanical impedance-instrumented corrosion-measuring probe for corrosion monitoring. The proposed probe is fabricated by attaching a circular lead zirconate titanate patch onto a metal rod. Compared to other electromechanical impedance-based corrosion-monitoring methods, the probe is capable of isolating the influence of structural complexity, variations in loading and boundary conditions. Five probes were fabricated in the experimental study and three of them were subjected to accelerated corrosion tests to mimic the corrosion-induced mass loss damage. Results showed that the peak magnitude of the conductance signatures was reduced with the increase in corrosion amount. The variations in the conductance signatures were quantified by three statistical quantifying metrics, that is, root-mean-square deviation, mean absolute percentage deviation, and correlation coefficient deviation. All these metrics increase with the increase in corrosion amount, which can be used as an indicator of the corrosion process. This study proves that the proposed corrosion-measuring probe is effective in monitoring corrosion and shows promising application potential. This research also serves as a proof-of-concept study to demonstrate the capability of the electromechanical impedance technique in monitoring mass loss due to corrosion.

Determining the Coupling Current As a Means of Detecting Crevice Activity and Inhibition

Monitoring Crevice Corrosion Via the Coupling Current: Effect of Anodamine

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

In Situ Electrochemical Monitoring of the Crevice Corrosion Process of the 7075-T651 Aluminium Alloy in Acidic NaCl and NaNO3 Solution

Detecting Critical Crevice Temperature for Duplex Stainless Steels in Chloride Solutions

EIS measurement for corrosion monitoring under multiphase flow conditions

Do Wettability Measurements Define Corrosion Inhibition of Etched Surfaces? A Study on Acid‐Etched 316L Stainless Steel

The Effect of Anodamine on the Corrosion Behavior of 1018 Mild Steel in Deionized Water: II. Electrochemical Impedance Analysis

Time-Lapse Observation of Crevice Corrosion in Grade 2205 Duplex Stainless Steel

A Multiphysics Model for Studying Transient Crevice Corrosion of Stainless Steel

A New Experimental Method for in Situ Corrosion Monitoring under Alternate Wet-Dry Conditions.

A New Method to Quickly Assess the Inhibitor Efficiency

Monitoring of Chloride-Induced Corrosion in Steel Rebars

Mfc-Based Structural Health Monitoring Using A Miniaturized Impedance Measuring Chip for Corrosion Detection

Calculations of the Cathodic Current Delivery Capacity and Stability of Crevice Corrosion under Atmospheric Environments

A Time-Saving Method to Assess the Efficiency of Corrosion Inhibitors by Electro Osmosis

An Electromechanical Impedance-Instrumented Corrosion-Measuring Probe

Corrosion Monitoring of Reinforced Steel Embedded in Cement Mortar under Wet-And-Dry Cycles by Electrochemical Impedance Spectroscopy

Accelerated corrosion of low carbon steel by oscillatory acidic streams generated with a bio-inspired claw device

Corrosion Inhibitor Screening For Aa6014 Aluminum Alloy Under Different Ambient Conditions Using A Novel Multielectrode Methodology

A New Method for Corrosion Current Measurement: the Dual-Electrochemical Cell (DEC)