A Novel Approach to Reduction of Co2 into Methanol by Water Splitting with Aluminum over A Copper Catalyst

Lingyun Lyu,Fangming Jin,Heng Zhong,Hongjuan Chen,Guodong Yao

DOI: https://doi.org/10.1039/c5ra02872h

IF: 4.036

2015-01-01

RSC Advances

Abstract:A novel method of water splitting for CO2reduction into methanol was proposed by directly using commercially available and non-precious Al and Cu powder as a reductant and catalyst, respectively.

What problem does this paper attempt to address?

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Wenze Li,Peng Lu,Ding Xu,Kai Tao

DOI: https://doi.org/10.1007/s11814-017-0278-8

IF: 2.7

2017-01-01

Korean Journal of Chemical Engineering

Abstract:Reduced Cu/ZnO catalyst was synthesized through solid phase grinding of the mixture of oxalic acid, copper nitrate and zinc nitrate, followed by subsequent calcination in N-2 atmosphere without further H-2 reduction. The catalysts were characterized by various techniques, such as XRD, TG-DTA, TPR and N2O chemisorption. Characterization results suggested that during the calcination in N-2, as-ground precursor (oxalate complexes) decomposed to CuO and ZnO, releasing considerable amount of CO, which could be used for in situ reduction of CuO to Cu-o. The in situ reduced O/I-Cu/ZnO catalyst was evaluated in CO2 hydrogenation to methanol, which exhibited superior catalytic performance to its counterpart O/H-Cu/ZnO catalyst obtained through conventional H-2 reduction. The decomposition of precursor and reduction of CuO happened simultaneously during the calcination in N-2, preventing the growth of active Cu-0 species and aggregation of catalyst particles, which was inevitable during conventional H-2 reduction process. This method is simple and solvent-free, opening a new route to prepare metallic catalysts without further reduction.
Hydrogen production by water splitting with Al and in-situ reduction of CO 2 into formic acid

guodong yao,xu zeng,yujia jin,heng zhong,jia duo,fangming jin

DOI: https://doi.org/10.1016/j.ijhydene.2015.04.073

IF: 7.2

2015-01-01

International Journal of Hydrogen Energy

Abstract:The utilization of CO2 as a carbon source to produce useful chemicals could be regarded as a promising way to reduce CO2 emissions and to minimize global warming. In this study, hydrogen obtained by water spilling with Al was used for in-situ reduction of CO2 into formic acid. The common bulk Al was employed as a reducing agent to split water for reduction of CO2, possessing safe and convenient advantages. Results revealed that the hydrogen production from water with the oxidation of Al can be enhanced in the presence of NaHCO3, as a source of CO2, which can be in-situ reduced into formic acid. A considerable high formic acid yield of 64% with near 100% selectivity was achieved. Additionally, experiments of mix-metals containing Fe, Al, Cu. Zn and Sn with NaHCO3 were conducted to investigate the Electronic waste (E-waste) as reductant for reducing CO2 and more than 60% yield of formic acid were obtained, indicating that CO2 reduction by waste metal is feasible. This study can assist in developing an efficient and economical process for conversion of CO2 to value-added chemicals.
Highly Efficient Water Splitting and Carbon Dioxide Reduction into Formic Acid with Iron and Copper Powder

Heng Zhong,Ying Gao,Guodong Yao,Xu Zeng,Qiuju Li,Zhibao Huo,Fangming Jin

DOI: https://doi.org/10.1016/j.cej.2015.05.098

IF: 15.1

2015-01-01

Chemical Engineering Journal

Abstract:The utilization of CO2 as a cheap and abundant carbon source to produce useful chemicals or fuels could be regarded as one of the promising ways for sustainable development. The water splitting for CO2 reduction with solar energy is one of the most potential process, however, a high solar-to-fuel efficiency keeps a great challenge. In this work, a Cu-catalyzed highly efficient and robust method for splitting water to reduce CO2 into formic acid with a simple commercially available Cu and Fe powder was presented. Results showed that the formic acid production with Cu catalyst was much higher than that without Cu or with Ni catalyst, and an excellent formic acid production of about 71%, which represented the highest formic acid production from CO2 using Fe reductant to date, was obtained under a mild hydrothermal condition at 300°C for 2h. The Cu catalyst was relatively stable and could be used repeatedly without causing a significant change in the formic acid production. A reaction mechanism of the conversion of HCO3− into formic acid was also proposed. The water splitting for CO2 reduction with Fe is an exothermic reaction, thus the proposed process may provide a viable method for highly efficient water splitting and CO2 reduction into value-added chemicals by combining the reduction of FexOy into Fe with bio-derived chemicals.
Preparation of High Performance Cu/Zno/Al2o3 Catalyst for Methanol Synthesis from Co2 Hydrogenation by Coprecipitation-Reduction

Y Cao,LF Chen,WL Dai,KN Fan,D Wu,YH Sun

2003-01-01

Abstract:A novel coprecipitation-reduction process has been proposed for preparing highly selective Cu/ ZnO/Al2O3 catalysts,for, methanol synthesis from CO2 hydrogenation. Compared to the catalysts prepared by the conventional method, the new catalysts prepared via the new method exhibit much higher BET surface area and pore size, much smaller crystallite size and higher catalytic activity and selectivity in CO2 hydrogen aition to methanol. It is also found that the molar ratio of Cu+ to Cu-0 on the surface of the catalyst obtained by coprecipitation-reduction is much higher than that on the reduced catalyst obtained by the conventional method which could be crucial for its high activity and selectivity for catalytic hydrogenation of CO2 to methanol.
A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation

Yan Ma,Qi Sun,Dong Wu,Wen-Hao Fan,Yu-Long Zhang,Jing-Fa Deng

DOI: https://doi.org/10.1016/S0926-860X(98)00079-9

1998-01-01

Abstract:According to the features of CuC2O4. H2O and the colloid/precipitation theories, a practical approach for the preparation of Cu/ZnO-based catalyst, which had high activity for methanol synthesis, was proposed and verified in experiments. Coprecipitation reaction in the ethanol solution aias found to be an effective route for the preparation of a highly active and selective catalyst. The characterization of XRD, N-2 physisorption, TEM and the measurement of the copper surface area by nitrous oxide titration revealed that preparation conditions have a significant influence on the structure and surface properties of the precursors and the catalysts, as well as on the catalytic activities for methanol synthesis from CO2 hydrogenation. (C) 1998 Elsevier Science B.V. All rights reserved.
Optimizing Water Dissociation Dehydrogenation Process Via Sn Single Atom Incorporation for Boosting Photocatalytic CO2 Methanation

Mingyang Li,Chengxuan He,Xiao Yang,Zhiguo Liu,Jiaying Li,Lingzhi Wang,Shiqun Wu,Jinlong Zhang

DOI: https://doi.org/10.1016/j.checat.2023.100737

2023-01-01

Chem Catalysis

Abstract:The conversion of CO2 into value-added methane (CH4) via light -driven processes represents a promising strategy for mitigating en-ergy scarcity and curtailing CO2 pollution. However, the intricate re-action kinetics of multiple electron-proton coupling processes remain a significant challenge. During the CO2 photoreduction pro-cess, the promotion of proton production from water dissociation for CH4 generation has been overlooked. Herein, Co3O4 is modified by Sn single atoms to realize selective CH4 production from CO2 photoreduction. The introducing of Sn induces generation of oxy-gen vacancy and adjacent low-valence Co (Co2+), which favors CO2 adsorption and activation by virtue of the reduced steric hindrance and enriched electrons at Co2+ sites. Specifically, Sn single atoms serve as H2O dissociation sites, accelerating the production of pro-tons and reducing the energy barrier of the rate-determining step. Our work endows a guideline for controlling CO2 photoreduction products' selectivity through the delicate design of active sites in catalysts and reaction kinetics optimization.
NaHCO3-enhanced hydrogen production from water with Fe and in situ highly efficient and autocatalytic NaHCO3 reduction into formic acid.

Jia Duo,Fangming Jin,Yuanqing Wang,Heng Zhong,Lingyun Lyu,Guodong Yao,Zhibao Huo

DOI: https://doi.org/10.1039/c5cc09611a

IF: 4.9

2016-01-01

Chemical Communications

Abstract:We report a highly efficient water splitting for CO2 reduction into formic acid with a commercially available metal of Fe powder without adding any other catalyst. An excellent formic acid yield of more than 90% was attained.
A Novel Method of Nahco3 Reduction into Formic Acid with N2h4 Center Dot H2o over Ni Catalyst

Feiyan Chen,Guodong Yao,Zhibao Huo,Fangming Jin

DOI: https://doi.org/10.1039/c4ra14326d

IF: 4.036

2015-01-01

RSC Advances

Abstract:An efficient metal-free method of CO2reduction with N2H4·H2O over common Ni powder is proposed.
Enhanced Selectivity for the Electrochemical Reduction of CO2 to Alcohols in Aqueous Solution with Nanostructured Cu–Au Alloy As Catalyst

Falong Jia,Xinxing Yu,Lizhi Zhang

DOI: https://doi.org/10.1016/j.jpowsour.2013.12.002

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:Electrochemical reduction of CO2 in an aqueous 0.5 M KHCO3 solution is studied by use of novel nanostructured Cu-Au alloys, which are prepared through electrochemical deposition with a nanoporous Cu film (NCF) as template. Linear voltammetry results show that the as-synthesized Cu-Au alloys exhibit obvious catalysis towards electrochemical reduction of CO2. Further analysis of products reveals that faradic efficiencies of alcohols (methanol and ethanol) are greatly dependent on the nanostructures and compositions of Cu-Au alloys. It is expected that this work could provide new insight into the development of powerful electrocatalysts for reduction of CO2 to alcohols. (C) 2013 Elsevier B.V. All rights reserved.
Spontaneous Reduction by One Electron on Water Microdroplets Facilitates Direct Carboxylation with CO 2

Huan Chen,Ruijing Wang,Jinheng Xu,Xu Yuan,Dongmei Zhang,Zhaoguo Zhu,Mary Marshall,Kit Bowen,Xinxing Zhang

DOI: https://doi.org/10.1021/jacs.2c12731

IF: 15

2023-01-21

Journal of the American Chemical Society

Abstract:Recent advances in microdroplet chemistry have shown that chemical reactions in water microdroplets can be accelerated by several orders of magnitude compared to the same reactions in bulk water. Among the large plethora of unique properties of microdroplets, an especially intriguing one is the strong reducing power that can be sometimes as high as alkali metals as a result of the spontaneously generated electrons. In this study, we design a catalyst-free strategy that takes advantage of the...

chemistry, multidisciplinary
Methanol Production by Reduction of Formic Acid over Cu Catalyst under Hydrothermal Conditions

Min Cheng,Bing Wu,Fangming Jin,Xiaokun Duan,Yuanqing Wang

DOI: https://doi.org/10.1063/1.3529286

2010-01-01

Abstract:In this paper, a two-step process for converting carbon dioxide into methanol was established, consisting of conversion of carbon dioxide into formic acid and formic acid into methanol by hydrothermal treatment. For our previous studies has investigated the reduction of carbon dioxide to formic acid under hydrothermal conditions, the focus of this paper was set on the reduction of formic acid into methanol. The synthesis of methanol was examined by varying the following parameters: amount of Cu as catalyst, pH of the reagent, amount of Zn as reductant, reaction time and so on. The highest yield of 27.8% was achieved. The results indicated that Zn or Al was able to reduce formic acid to methanol more efficiently than other metal reductants. It was also found out that the addition of acid or alkali was not favorable for the synthesis of methanol.
Electrochemical CO2 Reduction: Progress and Opportunity with Alloying Copper

Mao Ding,Zhaoyang Chen,Chunxiao Liu,Youpeng Wang,Chengbo Li,Xu Li,Tingting Zheng,Qiu Jiang,Chuan Xia

DOI: https://doi.org/10.1016/j.matre.2023.100175

2023-01-01

Materials Reports Energy

Abstract:Electroreduction of carbon dioxide (CO2) into value-added chemicals offers an entrancing approach to maintaining the global carbon cycle and eliminating environmental threats. A key obstacle to achieving long-term and large-scale implementation of electrochemical CO2 reduction technology is the lack of active and selective catalysts. Copper (Cu) is one of the few candidates that can facilitate C–C coupling to obtain high-energy oxygenates and hydrocarbons beyond carbon monoxide (CO), but it suffers from poor selectivity for products of interest and high overpotentials. Alloying is an effective way to break the linear scaling relations and uniquely manipulate the reactivity and selectivity, which is hard to achieve by using monometallic compositions alone. By alloying Cu with other metals, one could change the catalytic properties of the catalyst by tuning the local electronic structure and modulating the adsorption strength of the reaction intermediates, thus improving the catalytic activity and selectivity. In this review, we focus on the recently developed Cu-based alloy catalysts (including conventional alloys, high-entropy alloys and single-atom alloys) that have been applied in electrocatalytic CO2 reduction (ECR). Theoretical calculations and experimental advances in understanding the key rate-limiting and selectivity-determining steps in those alloys are summarized, with a particular focus on identifying binding energy descriptors and the dynamic product formation mechanisms. In addition, we outline the opportunities and challenges in the fundamental understanding of ECR by recommending advanced in-situ characterization techniques and standardized electrochemical methods and offer atomic-level design principles for steering the reaction pathways to the desired products.
Breaking the Linear Scaling Relationship by Alloying Micro Sn to a Cu Surface toward CO2 Electrochemical Reduction

Bowen Song,Xueqian Xia,Zengying Ma,Renjie Li,Xiufeng Wang,Lin Zhou,Yucheng Huang

DOI: https://doi.org/10.1021/acs.jpclett.4c02088

2024-09-05

Abstract:The electrochemical CO2 reduction reaction (CO2RR) to HCOOH provides an avenue for reducing global accelerated CO2 emissions and producing high-value-added chemicals. Nevertheless, the presence of an inherent linear scaling relationship (LSR) between *OCHO and *HCOOH leads to the electrosynthesis of HCOOH being achieved at high cathodic potentials. In this work, by adjusting the different Cu:Sn ratio of SnxCu(1-x) alloys, we comprehensively explored the electrocatalytic 2e- CO2RR performance toward the production of HCOOH. Combining density functional theory calculations with the constant-potential implicit solvent model, the Sn0.03Cu0.97 surface alloy was posited to be a promising electrocatalyst with superior HCOOH selectivity and an ultralow limiting potential of -0.20 V in an environment of pH = 7.2. The high performance was found to originate from the breaking of the LSR, which is a result of an extraordinary electronic property of the active Cu site. This work not only advances a global-searched strategy for the rational design of efficient catalysts toward HCOOH production but also provides in-depth insights into the underlying mechanism for the enhanced performance of microalloy electrocatalysts.
Construction of a gold-cobalt alloy catalyst to enhance the green reduction of carbon dioxide

Yuheng Zhou,Xiaohui Wang,Xubo Huang,Hui Deng,Yuntao Hu

DOI: https://doi.org/10.1016/j.jcou.2022.102245

IF: 7.7

2022-11-01

Journal of CO2 Utilization

Abstract:Facilitating carbon neutrality to mitigate the greenhouse effect by an efficient means has great environmental and social value. In this research, the Au-Co catalyst is synthesized with a developed non-aqueous solvent strategy. By tuning the ratio of the bimetallic composition, it represents a prominent catalytic activity in the reduction of CO2 with benzyl alcohol as the hydrogen donor. By means of the anaerobic oxidation of benzyl alcohol, CO2 can be reduced to methanol as well as methyl benzoate as the main product with a high turnover frequency (1079 h−1) at 220 °C. Taking advantage of a series of characterizations and DFT calculation, it is revealed that the catalytic system constructed in this research promotes the adsorption and activation of CO2. These results demonstrate a feasible route to develop hydrogen-free utilization of CO2 to achieve environmental carbon neutrality in the future.

engineering, chemical,chemistry, multidisciplinary
V/Cu/Co-mediated Oxide/carbonate Heterostructural Nanoflowers for High-Efficient Electrocatalytic Overall Water Splitting in Alkaline Media

Wenxin Wang,Lulu Xu,Ruilong Ye,Junjie Zhu,Liping Jiang,Xingcai Wu

DOI: https://doi.org/10.1016/j.electacta.2024.145187

IF: 6.6

2024-01-01

Electrochimica Acta

Abstract:Alkaline water electrolysis is a promising route to high-performance water splitting. However, the rational development of electrocatalysts remains an ongoing challenge in industrial applications. In this work, a novel electrocatalyst, the copper and vanadium codoped cobalt carbonate nanoflowers were loaded on nickel foam (VCuCoCOx@NF) through a facile hydrothermal approach for the first time, which was a high-performance and low-cost bifunctional electrocatalyst toward alkaline water splitting. When the composite material serves as bifunctional catalyst, the current densities achieve 10/100 mA cm-2 at voltages of 1.57/1.62 V in 1.0 mol L-1 KOH electrolyte, so it is superior to the Pt/C-Ir/C@NF (1.59/ 1.72 V). The morphology and structure were characterized by field emission scanning electron microscope (FESEM) and transmission electron microscopy (TEM). Density functional theory (DFT) calculation shows that the Gibbs energy changes of the reaction intermediates are decreased due to the codoping of Cu and V. This work not only provides the strategic guidance for large-scale clean energy-related application, but also inspires a novel concept to guide the extending design of transition-metallic mediated electrocatalysts.
Promoting effect of an aluminum emulsion on catalytic performance of Cu-based catalysts for methanol synthesis from syngas

Lili Wang,Lingmei Yang,Yuanhua Zhang,Wen Ding,Shiping Chen,Weiping Fang,Yiquan Yang

DOI: https://doi.org/10.1016/j.fuproc.2010.02.003

IF: 8.129

2010-07-01

Fuel Processing Technology

Abstract:Copper-based catalysts modified with aluminum precursors having different morphologies for methanol synthesis were prepared and the effect of the addition of aluminum emulsion on the characteristics of the catalyst was studied by using X-ray diffraction (XRD), temperature-programmed reduction (TPR) and differential thermal gravity (DTG). The experiment results show that the copper-based catalyst prepared by mixing a Cu–Zn precipitate with an amorphous aluminum emulsion prepared in advance by precipitating an aluminum salt with ammonia exhibits higher specific surface area and catalytic performance for methanol synthesis from synthesis gas. The catalysts thus prepared were found to have more (Cu,Zn)2CO3(OH)2 phase, from which more Cu/Zn sosoloid was produced during calcination. More sosoloid phase produced and stronger synergy between Cu and ZnO were verified to enhance the activity of the catalyst for methanol synthesis.

energy & fuels,engineering, chemical,chemistry, applied
Mg-Doped Cu Catalyst for Electroreduction of CO 2 to Multicarbon Products: Lewis Acid Sites Simultaneously Promote *CO Adsorption and Water Dissociation

Jiahao Wang,Hu Zang,Xin Liu,Changjiang Liu,Haiyan Lu,Nan Yu,Baoyou Geng

DOI: https://doi.org/10.1021/acs.inorgchem.4c03122

IF: 4.6

2024-09-23

Inorganic Chemistry

Abstract:The electroreduction of CO(2) to valuable fuels or high-value chemicals by using sustainable electric energy provides a promising strategy for solving environmental problems dominated by the greenhouse effect. Copper-based materials are the only catalysts that can convert CO(2) into multicarbon products, but they are plagued by high potential, low selectivity, and poor stability. The key factors to optimize the conversion of CO(2) into multicarbon products are to improve the adsorption capacity...

chemistry, inorganic & nuclear
CO2Hydrogenation over Copper/ZnO Single‐Atom Catalysts: Water‐Promoted Transient Synthesis of Methanol

Wenlong Wu,Yanan Wang,Lei Luo,Menglin Wang,Zhongling Li,Yue Chen,Zhiqi Wang,Jingbo Chai,Zeyan Cen,Yongliang Shi,Jin Zhao,Jie Zeng,Hongliang Li

DOI: https://doi.org/10.1002/anie.202213024

2022-01-01

Angewandte Chemie International Edition

Abstract:AbstractThe hydrogenation of CO2by renewable power‐generated hydrogen offers a promising approach to a sustainable carbon cycle. However, the role of water during CO2hydrogenation is still under debate. Herein, we demonstrated that either too low or too high contents of water hampered the methanol synthesis over Cu/ZnO based catalysts. For Cu single atoms on ZnO supports, the optimal content of water was 0.11 vol. % under 30 bar (CO2 : H2=1 : 3) at 170 °C. Upon the introduction of optimal‐content water, the methanol selectivity immediately became 99.1 %, meanwhile the conversion of CO2underwent a volcano‐type trend with the maximum of 4.9 %. According to mechanistic studies, water acted as a bridge between H atoms and CO2/intermediates, facilitating the transformation of COOH* and CH2O*. The enhanced activity induced the generation of more water to react with CO via water‐gas shift reaction, resulting in the increase in methanol selectivity.
Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

Sharon Abner,Aicheng Chen

DOI: https://doi.org/10.1039/d4nr00909f

IF: 6.7

2024-06-20

Nanoscale

Abstract:The search for an efficient and stable catalyst for the electrochemical reduction of CO 2 to value-added chemicals is especially critical for lowering the atmospheric CO 2 concentration. In this study, self-supported cobalt/copper nanostructured catalysts were designed, where the influences of the elemental composition and acid-etching on their efficiency towards the CO 2 reduction reaction were studied. The developed Co/Cu catalysts showed superb catalytic activity with a low onset potential at −0.2 V vs. RHE. Gas and liquid product analysis revealed that formate and CO were the main products. It was observed that lower reductive potentials were favourable for formate production, while higher reductive potentials were more favourable for CO formation. In situ electrochemical FTIR studies were further conducted to gain insight into the CO 2 reduction mechanism. The novel synthetic procedure reported in this study leads to promising electrocatalysts with high efficiencies for the conversion of CO 2 into valuable products.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Stable Cu/Cu2O/CuN3@NC Catalysts for Aqueous Phase Reforming of Methanol

Minglei Lu,Zhuoyu Zheng,Weiwei Lu,Haiping Zhu,Junwei Liao,Yuxin Ge,Xueer Huang,Qian Zhang,Jiajin Li,Yiyuan Zhou,Xiaoping Wu,Baozhu Chen,Chunxiao Yang,Xitang Qian,Minhua Shao,Tiejun Wang

DOI: https://doi.org/10.1021/acsnano.4c07386

IF: 17.1

2024-09-05

ACS Nano

Abstract:Aqueous-phase reforming of methanol represents a promising avenue for hydrogen (H2) production. However, developing highly efficient and low-cost nonprecious catalysts remains challenging. Here, we report the synthesis of Cu-based catalysts with Cu, Cu2O, and CuN3 nanoparticles anchored on the nitrogen-doped carbon, forming Cu0/Cu+/Cu-N3 active sites. This catalyst achieves a H2 production rate of 140.1 μmol/gcat/s at 210 °C, which is several times to 2 orders of magnitude higher than that of Cu-, Ni-, even Pt-based catalysts, demonstrating excellent long-term stability over 350 h at 210 °C. A mechanism investigation reveals that the Cu-N3 site facilitates water dissociation into *OH and improves *CO and *OH conversion, leading to enhanced CO conversion and H2 production kinetics.

A Novel Approach to Reduction of Co2 into Methanol by Water Splitting with Aluminum over A Copper Catalyst

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Hydrogen production by water splitting with Al and in-situ reduction of CO 2 into formic acid

Highly Efficient Water Splitting and Carbon Dioxide Reduction into Formic Acid with Iron and Copper Powder

Preparation of High Performance Cu/Zno/Al2o3 Catalyst for Methanol Synthesis from Co2 Hydrogenation by Coprecipitation-Reduction

A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation

Optimizing Water Dissociation Dehydrogenation Process Via Sn Single Atom Incorporation for Boosting Photocatalytic CO2 Methanation

NaHCO3-enhanced hydrogen production from water with Fe and in situ highly efficient and autocatalytic NaHCO3 reduction into formic acid.

A Novel Method of Nahco3 Reduction into Formic Acid with N2h4 Center Dot H2o over Ni Catalyst

Enhanced Selectivity for the Electrochemical Reduction of CO2 to Alcohols in Aqueous Solution with Nanostructured Cu–Au Alloy As Catalyst

Spontaneous Reduction by One Electron on Water Microdroplets Facilitates Direct Carboxylation with CO 2

Methanol Production by Reduction of Formic Acid over Cu Catalyst under Hydrothermal Conditions

Electrochemical CO2 Reduction: Progress and Opportunity with Alloying Copper

Breaking the Linear Scaling Relationship by Alloying Micro Sn to a Cu Surface toward CO2 Electrochemical Reduction

Construction of a gold-cobalt alloy catalyst to enhance the green reduction of carbon dioxide

V/Cu/Co-mediated Oxide/carbonate Heterostructural Nanoflowers for High-Efficient Electrocatalytic Overall Water Splitting in Alkaline Media

Promoting effect of an aluminum emulsion on catalytic performance of Cu-based catalysts for methanol synthesis from syngas

Mg-Doped Cu Catalyst for Electroreduction of CO 2 to Multicarbon Products: Lewis Acid Sites Simultaneously Promote *CO Adsorption and Water Dissociation

CO2Hydrogenation over Copper/ZnO Single‐Atom Catalysts: Water‐Promoted Transient Synthesis of Methanol

Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

Stable Cu/Cu2O/CuN3@NC Catalysts for Aqueous Phase Reforming of Methanol