Abstract:Efforts were made to explore the potentiality that formic acid gives a conversion into methanol by applying metallic catalysts in subcritical hydrothermal conditions. The subcritical hydrothermal conversion of formic acid into methanol was carried out by using Zn as a reductant and Ni as a catalyst. The effect of various experimental parameters, e.g., the amount of Zn (Ni), Zn/Ni ratio, temperature, pressure, reaction time and filling rate etc. was investigated. The conclusion showed that the highest methanol yield of 11.95% was achieved under proper conditions which was certified in the experiment that Zn/Ni ratio of 1:1.3, temperature of 180, reaction time of 12 hours, filling rate of 35%. Nickel, as one of transition metals, was effective catalyst in the hydrothermal conversion of formic acid into methanol. The reaction time was extended unavoidably with relatively low temperature. It can be expected that reaction time could have farther reduction with the increase of temperature. Additionally, the hydrothermal reaction can also occur without the addition of reductant and catalysts. According to the analysis of GC-TCD(thermal conductivity detector), H2 and CO2 were detected. It was supposed that formic acid gave a quick decomposition into H2 and CO2 initially and then the reaction of methanol synthesis occurred and the reaction of H2 and CO2 was proved existing through the observation of changes of H2 and CO2 amount. However, methanol can also be obtained through reducing formic acid with H2 as reductant. Based on present experimental analysis, it can be determined that the former reaction path has its priority. It is not sure that whether formic acid was directly reduced into methanol by H2..

Methanol Production by Reduction of Formic Acid over Cu Catalyst under Hydrothermal Conditions

A Graphene-Supported Copper-Based Catalyst for the Hydrogenation of Carbon Dioxide to Form Methanol

Catalytic Reduction of Carbon Dioxide into Methanol over Copper under Hydrothermal Conditions

Study of Catalytic Reduction of Formic Acid to Methanol under Mild Hydrothermal Conditions

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Reduction of formic acid to methanol under hydrothermal conditions in the presence of Cu and Zn.

Catalytic conversion of formic acid to methanol with Cu and Al under hydrothermal conditions

Catalytic Conversion of Formic Acid into Methanol in Subcritical Hydrothermal Conditions

Enhancing Methane Conversion by Modification of Zn States in Co-Reaction of MTA

Hydrothermal Conversion of CO<sub>2</sub> into Formic Acid with Zinc and Copper Powders under Low Temperature

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Optimization Study on Catalytic Reduction of CO2 into Formic Acid Under Hydrothermal Conditions

Hydrothermal Conversion of Co2 into Formic Acid on the Catalysis of Cu

Methanol Synthesis from CO2 Hydrogenation with a Cu/Zn/Al/Zr Fibrous Catalyst

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Development of highly stable catalyst for methanol synthesis from carbon dioxide

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Modified Cu–ZnO Catalysts Supported on the Mixture of ZnO and Zn–Al Oxide for Methanol Production via Hydrogenation of CO and CO2 Gas Mixture

Towards High CO2 Conversions Using Cu/Zn Catalysts Supported on Aluminum Fumarate Metal-Organic Framework for Methanol Synthesis