Abstract:Dynamic responses of cylindrical shells coupled with shape-memory alloy (SMA) ring segments placed at critical locations are investigated. Since the SMA actuators are highly nonlinear and governed by the temperate-dependent stiffness and martensite/austenite fraction, input shaping and phase shift of temperature profiles are incorporated to control the shell vibrations. Open-loop equations of an elastic cylindrical shell panel are defined first and then used with assumed mode-shape functions satisfying specified boundary conditions in the free-vibration analysis. Modal-analysis data are used to determine spatial strain distributions of natural modes. Distributed modal-signal characteristics suggest optimal placements of SMA actuator segment(s) for each given mnth mode. Based on the modal-expansion method, the open-loop control force induced by the SMA ring segments applied to a simply supported cylindrical shell panel is formulated. This formulation indicates that only the odd modes in the circumferential direction can be controlled. Longitudinal modes are controlled via placing specific number, depending on the mode, of actuator segments along the panel length. To predict control effects of the nonlinear SMA ring segments, the modal participation factor response is determined for an external harmonic excitation applied to the shell along with induced SMA control forces, via sinusoidal and saw-tooth temperature profiles to generate desirable control forces and to eliminate the unwanted effects. Analysis results suggest that with proper choice of temperature waveform function to the SMA ring segments and minor modifications to frequency and phase, the SMA ring segments can attenuate unwanted external vibrations of cylindrical shells.

Control of Cylindrical Shell Panels With Input Shaping and Phase Shift of Shape Memory Ring Segments

Forced Response of Cylindrical Shells Coupled with Nonlinear Shape-Memory-alloy (SMA) Actuators Regulated by Sinusoidal and Saw-Tooth Temperature Profiles

Vibration Control of Cylindrical Shell Panel with Shape Memory Alloy Actuators

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Microscopic actuation and optimal actuator locations of paraboloidal cylindrical shells

Actuation of Parabolic Cylindrical Shell Panels with Light-Activated Shape Memory Actuators

Spatial Electrostrictive Modal Actuation Of Conical Shells

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs | Optymalne sterowanie drganiami powłok stożkowych za pomoca{ogonek} spiralnego skolokowanego układu czujnika i elementu wykonawczego

Control Effectiveness of Segmented Actuators Laminated on Ring-Shells

PARAMETRIC STUDY OF SEGMENTED TRANSDUCERS LAMINATED ON CYLINDRICAL SHELLS, PART 2: ACTUATOR PATCHES

Wireless Active Vibration Control of Thin Cylindrical Shells Laminated with Photostrictive Actuators

Geometry Transformation and Sensing/control of Shells with Segmented Transducer Patches

Micro-control actions of actuator patches laminated on hemispherical shells

Spatial Microscopic Actuations of Shallow Conical Shell Sections

Magnetostrictive Microactuations and Modal Sensitivities of Thin Magnetoelastic Shells

Control of Conical Shells Laminated With Full and Diagonal Actuators

Nonlinear Piezo-Thermoelastic Shell Theory Applied to Control of Variable-Geometry Shells

Nonlinear Shape Control of Shells and Plates

CONTROL OF ADAPTIVE SHELLS WITH THERMAL AND MECHANICAL EXCITATIONS

Spatially Filtered Vibration Control of Cylindrical Shells