Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

DEM Simulation of Liquefaction for Cohesionless Media at Grain Scale

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

CFD-DEM Modeling of Suffusion Effect on Undrained Behavior of Internally Unstable Soils

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Novel Undrained Servomechanism in Discrete-Element Modeling and Its Application in Multidirectional Cyclic Shearing Simulations

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Predicting Cyclic Liquefaction Behavior of Saturated Granular Materials Using an Updated State Evolution Model

Investigation of cyclic liquefaction with discrete element simulations

Exploring Packing Density, Critical State, and Liquefaction Resistance of Sand-Fines Mixture Using DEM

Discrete Element Simulation Of Soil Liquefaction: Fabric Evolution, Large Deformation, And Multi-Directional Loading

Exploring the Macroscopic Behavior and Microstructure Evolution of Lightly Cemented Sand in the Post-Liquefaction Process Using DEM

Microscale Descriptors for Particle-Void Distribution and Jamming Transition in Pre- and Post-Liquefaction of Granular Soils

DEM simulation of sand liquefaction under partially drained conditions

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

Multiple Liquefaction of Granular Soils: A New Stacked Ring Torsional Shear Apparatus and Discrete Element Modeling

DEM Study of Fabric Features Governing Undrained Post-Liquefaction Shear Deformation of Sand

DEM investigation on flow instability of particulate assemblies under coupling between volumetric and axial strains

Grain-Level Numerical Simulations for the Effective Elasticity of Weakly Cemented Sandstones